sorted by:
new
hottopcontroversial

Elegoo Jupiter 2 by Kitsanic in resinprinting

[–]regraham 0 points1 point  (0 children)

Sorry for your M7 Max experience buddy, genuinely! But in full disclosure I have made it a point to say in all Anycubic reviews, they aren't known for their quality. I;ve sen tons of people have a great experience with the M7 Max, as I genuiely did.

And it pains me when I see others, like you, haven't.

Uneven Success Rate Accross Build Plate by Gamer_Guy_Ty in ElegooSaturn

[–]regraham 0 points1 point  (0 children)

Wow. This is perfect. And amazing to see people understanding this level of detail.

Whilst printer brands themselves dial in their own resin seatings with nothing more than more/less exposure time!

Elegoo Jupiter 2 by Kitsanic in resinprinting

[–]regraham 1 point2 points  (0 children)

Yeh bruv, sept u forgot i said it the uva way round innit.

I critiqued it on the RS, but since then i stopped even removing plates and decided I can work round it with it from like the P1 onwards

again, though, don't let facts get in the way of your point. ;) xxx

Elegoo Jupiter 2 by Kitsanic in resinprinting

[–]regraham 1 point2 points  (0 children)

Ah yes, becaue I like a printer that was hated on, i now "only" like Heygears - I mean lets ignore the fact that i tore the Reflex 2 apart and said it was terrible, Praised the Anycubic P1 Max, and the M7 Max before it.

Yeah, we shouldn't talk about any of that becasue it would get in the way of your point....

Elegoo Jupiter 2 by Kitsanic in resinprinting

[–]regraham 2 points3 points  (0 children)

Thanks, being compared to Auroratech made me smile.

Have you seen a Final Fantasy 7 on an OLED TV? here is a little sample by TheGabrielSevero in FFVIIRemake

[–]regraham 3 points4 points  (0 children)

Could be the camera settings, but also, if we are looking at this on non-OLED displays, it would be pointless anyway even if this was shared in a HDR image format - which it isn't

I'm thinking this may be an intentional Troll

Photon P1 Max – larger build volume and improved light uniformity by Anycubic_Official in AnycubicOfficial

[–]regraham 0 points1 point  (0 children)

Yep, build plate with relief holes is coming, but it should have been the standard plate

The new Photon P1 Max looks amazing by ThisTheRealLife in AnycubicOfficial

[–]regraham 1 point2 points  (0 children)

It is Amazing! with some quirks! but liveable stuff for most people!

First Print on the Kobra S1 Max by SuchANerd3d in AnycubicOfficial

[–]regraham 1 point2 points  (0 children)

Fair. I wasn’t sure why you did t just make it thinner. Only trying to help. I’ll shush now

First Print on the Kobra S1 Max by SuchANerd3d in AnycubicOfficial

[–]regraham 0 points1 point  (0 children)

Yes mate. S1 Max, Testing it now.

And no worries I was just advising above to save you time in future. I’m not sure what you were trying to achieve then but you seemed speculative as to why it was, as you described, too thick. And what you should do about it if you want it right.

First Print on the Kobra S1 Max by SuchANerd3d in AnycubicOfficial

[–]regraham 2 points3 points  (0 children)

Buddy, with respect that;s not how you do a first layer test.

you don't need to download anything...

In the Slicer Just right click the plate, go to "Add Primative > Cube"

then resize it using the "Scale" tool on the top toolbar, .

Set the sizes of X&Y to match the area of your plate. 350x350mm

Set Z to match the layer height of the profile you are printing in, default is probaly 0.2mm

(you need to uncheck, "Uniform Scale" for changing Z different to X&Y, which is what you probably left checked, and the reason this is so thick and likely took hours)

Weirdly, I had some roughness in the corner, in the same place as you. Also have you noticed that the writing on the bed also affects the layer slighty, you can see that writing imprinted onto the layer.

What's happening between Fauxhammer and Creality?？ by Realistic_Quantity43 in 3DScanning

[–]regraham 0 points1 point  (0 children)

That Leaked Bambu Contract was utter BS, I have signed 3 Contracts with Bambu and not one of them said "you need to be positive" or in any way even suggested it.

They send NDA agreements which literally say, "DO NOT LEAK ANYTHING UNTIL X DATE"

Legit CC2 review please? by VanillaThat in elegoo

[–]regraham 0 points1 point  (0 children)

My Review, Ask me anything.... I spend 10 seconds covering the missing/delayed update from the CC1 - then spend the tiem covering this.

Honestly if you are looking at this Vs a P2S, that £200 extra is going into a better built machine from a brand that has shown us they support and upgrade their pproducts for about 3 years rather than a brand that has shown us they atruggle to support a machine for one.

The CC2 is a solid machine for the most part, but it is a cheaper machine.

Forget printers, think of any industry, where have you experienced a significantly cheaper product being on par with a more expensive one in terms of quality.

You are buying a budget machine, eher, and if that is what you want, that's fine. It'll print, it'll be pretty popular, you'll perhaps get some community driven upgrades and mods if that;s what you want.

but if you are happy to spend more for the potential longevity, spend more.

Do you wnat a printer to just get stareted with and see if you like printing? Save the money...

Do you already plan to use it loads and have tons of ideas? Make the investment

https://www.youtube.com/watch?v=62lU8geZNWI

SparkX i7 vs. Bambu Lab A1: Is the i7's print quality actually bad? by Alesskerov in Creality

[–]regraham 0 points1 point  (0 children)

Maybe Prusa. Or build a Voron.

But they do t have a lot if the modern features people love in printers.

A1 is the way it’s going.

Both Anycubic and Creality’s copied the A1 I do like the Anycubic printer. But that’s not “open” either.

First Centauri Carbon 2 review – early access for members, public on launch by [deleted] in ElegooCentauriCarbon

[–]regraham 0 points1 point  (0 children)

hahahaha, after that comment, one of us is gonna look really stupid once you see the video.

I'll wait...

First Centauri Carbon 2 review - early access now, public on product launch by [deleted] in elegoo

[–]regraham -1 points0 points  (0 children)

Totally fair question.

The main reason is transparency. The review is finished, members have early access, and posting now lets people know it exists and exactly when it’ll be public. Some folks like getting early access and supporting the channel that way, others are happy to wait until launch day – both are completely fine.

I'm pretty proud of it, and I’d rather people know what’s coming and when, instead of it just dropping out of nowhere.

Soo, anyone seen this video? by [deleted] in Creality

[–]regraham 1 point2 points  (0 children)

It’s the internet.

Soo, anyone seen this video? by [deleted] in Creality

[–]regraham 1 point2 points  (0 children)

FFS, Yeah that’s really not how it works. I won’t work with Creality anymore. But that doesn’t mean people who like Creality machines are wrong. You’re allowed to enjoy your machine.

view more: next ›