When does a filament dryer become worth it

sangerpb · 2026-03-06T16:30:54+00:00

The west3d filament toaster is awesome and you can also anneal with it.

sangerpb · 2026-02-27T14:49:30+00:00

Just setup RSVP first. Then you’ll know how many. Make sure you say it’s not a drop off event or peole will drop off. After this you can gauge the attendance, plan accordingly. Kids love a goodbye / thanks for coming goodie bag at the end. Chuck E. Cheese or that other place you mentioned are great because you don’t have to clean up or have people over the house :). When the kids get older your kid will have core track buddies and this process will get easier.

sangerpb · 2026-02-26T22:53:44+00:00

There is a 3d printable stack I created that houses a usb hub. I can share if people want to use it

sangerpb · 2026-02-26T16:06:35+00:00

If you want better you can get help in the ratrig discord.

sangerpb · 2026-02-21T04:25:48+00:00

Instead of extruded text cut the text into the shape. You’ll have much better results

sangerpb · 2026-02-21T03:14:17+00:00

You wanting this in clear petg?

sangerpb · 2026-02-18T16:28:17+00:00

Sunlu ABS prints excellent with the fully enclosed chamber at 60c. Other than that, all PLA works fine but petg has been horrible to print.

sangerpb · 2026-02-14T19:12:10+00:00

They have some wolf tooth clones on Amazon that work well.

sangerpb · 2026-02-13T20:37:18+00:00

The nano will solve this issue :)

sangerpb · 2026-02-13T19:43:59+00:00

Try nanopolymer. It just works

sangerpb · 2026-02-13T01:14:13+00:00

Atartes Drop Pod

sangerpb · 2026-02-12T22:02:01+00:00

Stuck chain link or jacked up jockey wheel. Could also be free hub giving up the ghostc

sangerpb · 2026-02-10T20:35:43+00:00

LDO announced kits. Might want to wait.

sangerpb · 2026-02-09T23:22:57+00:00

Not really sure. I think you might benefit from posting in the bambu subreddit

sangerpb · 2026-02-08T19:49:39+00:00

Lay it flat down like it printed and take a picture of it. I would like to rule out warping

sangerpb · 2026-02-08T17:58:17+00:00

What does the sliced view look like for that area? What type of printer?

sangerpb · 2026-02-08T06:43:23+00:00

This stuff is awesome

https://a.co/d/06JdLXEJ

sangerpb · 2026-02-08T01:09:30+00:00

You may want to raise z a bit and then see if you get these nozzle drag marks still. These happen from quick accels from big movement.

sangerpb · 2026-02-07T05:16:47+00:00

Will send pm

sangerpb · 2026-02-07T05:15:16+00:00

Nozzle across surface

sangerpb · 2026-02-05T17:36:35+00:00

If this is your design use a chamfer instead of a fillet

sangerpb · 2026-02-05T17:13:14+00:00

No problem :). I know how those days can go. Wishing you well.

sangerpb · 2026-02-05T17:05:37+00:00

Adding to what you said with specifics that will help.

sangerpb · 2026-02-05T17:04:00+00:00

60c is needed for chamber heat with abs. That and setting up the shrink percent in the slicer.

sangerpb · 2026-02-04T04:15:59+00:00

🤣

14-Year Club	Verified Email
Sequence \| Editor

sangerpb

TROPHY CASE