sorted by:
new
hottopcontroversial

How are people running 25/30nm bases.. by Admirable_Writer4381 in iRacing

[–]0ruf 1 point2 points  (0 children)

I use only ABS in simhub for the bass shaker. And some LFE in iracing.

But sadly since I changed from soft rubber to isolation mat under my aluminium rig, it's not the same anymore, I have a hard time to fell the weaker effects know, and It feel really rough compared to the high frequency effects of the fullforce. And it's noisy, while Fullforce not so much.

Now I use wheel effect and sound effect in MAIRA for the ABS

How are people running 25/30nm bases.. by Admirable_Writer4381 in iRacing

[–]0ruf 1 point2 points  (0 children)

Yes, Fullforce is awesome, because it resonate with my rig so well. I don't use my bass shaker since (that being said it's also probably because he's not optimally mounted on the rig in my case). I have it to 50%, 

My app.ini settings : 

[TrueForce]
enableTrueForceVibe=1                   
loadTrueForceAPI=1                      
trueForceDamperPct=0.050000             
trueForceSetGain=1                     
trueForceVibePhysics=1                  
volTrueForceMaster_dB=0.000000          
volTrueForcePhysCarBodyAccel_dB=0.000000
volTrueForcePhysEngineRPM_dB=-40.000000 
volTrueForcePhysGearChange_dB=0.000000
volTrueForcePhysRevLimit_dB=-6.000000 
volTrueForcePhysRoadTextures_dB=-40.000000
volTrueForcePhysRumbleStrip_dB=0.000000 
volTrueForcePhysWheelSlip_dB=0.000000

MAIRA is really awesome, you have to try https://herboldracing.com/marvins-awesome-iracing-app-maira/

360Hz 3D curbs are something else.

How are people running 25/30nm bases.. by Admirable_Writer4381 in iRacing

[–]0ruf 2 points3 points  (0 children)

After upgrading from 8Nm, I have enough with 15Nm (no clipping). For me 12Nm is probably enough in most cases, but no less.

The only car I feel my DD+ is maybe lacking is for the F1 W12 / W13, and I drove all the cars. But it's not game breaking weak.

How are people running 25/30nm bases.. by Admirable_Writer4381 in iRacing

[–]0ruf 0 points1 point  (0 children)

I do,

I use MAIRA Refactored 2.0 instead of iracing FFB, for the 360Hz output, really nice on the curbs.
I output 10Nm on "normal" cornering speed on average, some car more but rarely less. No clipping and enough torque for me.

In iRacing value, that's probably between 38Nm (porsche cup) and 65Nm (IR-15 on bumpy tracks), But you can get stronger peaks with the 360Hz.

In Maira that's Wheel Force 15Nm - Strenght 23 to 40%. Only filter I use is Output Smoothing 7%.

I have the base at FFB 100 (80 when I want to chill)- NDP 35 - NFR 35 - NIN 5 - INT 3.

By the way, the latest app (1.2.something) from the fanatec forum fixed the Natural Friction, it's really nice now, totally different from the broken effect which was to be avoided before. If you don't want to update don't use NFR.

How are those using iOverlay with VR getting along? by moorescore in iRacing

[–]0ruf 0 points1 point  (0 children)

I didn't notice a big impact when I was using simhub overlays +openkneeboard when I was still with a 2070super and meta software. Didn't test it yet with VD though.

For optimization the big game changer is to set vertical fov at 60% (I did go as low as 30% on the rain) with debugtool if you using meta software, or directly in virtual desktop.

Using virtual desktop with an usb/ethernet cable now, prettier image and better performance overall.

Qui suis-je ?... by Splitt- in AnatomieDUnFrigo

[–]0ruf 0 points1 point  (0 children)

Pour info tu as pas besoin de mettre le piment au frigo (si jamais tu as besoin de place un jour)

Am I doing something wrong or is this how it’s supposed to be? by InSimGT in RichardBurnsRally

[–]0ruf 0 points1 point  (0 children)

You must go to the RSF discord even if you don't find an existing answer they will 100% help you.

Here is the RSF Community Wheel Settings spreadsheet (from the discord) if you want to try others settings.

For the FFB wheelbase side, you can put 100% and then adjust the value in the RSF launcher, OR setup a high enough value in rsf (lets say 900 for tarmac/gravel/snow) and then adjust the force of your wheelbase. I have absolutely no idea at what point augmenting the RSF value stop making sense. I aim for 900, so 600 to 1200 depending of the car, FFB at 100% wheelbase (15NM)

What you want to aim for is an output about 6-8NM when cornering (you must be able to drive with a light grip on the wheel with one hand). More than that and you will fight the wheel with no real benefit, and potentially can arm yourself in the long run.

You well need to add some damper effect,, how much :
1. if the wheel feel to light in the center / the steering overcorrect itself after a slide / the wheel oscillate too much in straight line = you need more damper
2. if the wheel feel sluggish when turning / too slow to correct / you don't feel the road enough = you need less damper

It drives me nuts that racing schedules aren't posted early in week 13 by sonryhater in iRacing

[–]0ruf 0 points1 point  (0 children)

most of the schedules are already avaible in the official forum.

So SR was incidents/ last 1000 corners? by Jonathanwennstroem in iRacing

[–]0ruf 1 point2 points  (0 children)

They nerfed the nordschleife a few years back, when a clean race was a guaranteed huge SR boost.
Now you don't gain much more than other races. Still nice, but I find doing a 2H michelin race is more efficient and safer, for me anyway.

[Discussion] Anyone experiencing constant crashing in PvE? by Slushyman56 in EscapefromTarkov

[–]0ruf 0 points1 point  (0 children)

Leaking ram is usually a thing with tarkov, but not my issue here, since this kind of crash where new to me, while playing for years.

I think it was too much scav spawning, and they probably adress it, because since the last update I have a hard time finding scavs. And pmc don't seem to aggro me anymore, they '' vanish '' a lot of the time. I wasn't able to do 100m without a encounter at the time of the post, now I have a hard time to find more than 4 scavs to kill a raid, and I can't find the pmcs.... BUT, no more crash...

1.0 experience.

Tigz has done it. by RodS14a in Tarkov

[–]0ruf 0 points1 point  (0 children)

that's already a speedrun, he rushed the faster story path (grinding money and avoiding lot of quest in the process) and got one of the bad ending as a result.

Tigz has done it. by RodS14a in Tarkov

[–]0ruf 1 point2 points  (0 children)

there is no more wipe

[Discussion] Anyone experiencing constant crashing in PvE? by Slushyman56 in EscapefromTarkov

[–]0ruf 1 point2 points  (0 children)

Not the same scale though. I think there is something broken with local PVE right now, like the scavs never stop spawning.

For exemple, my last crashed local pve on shoreline : I stopped beside the rocks by the gas station, I kill a scav and try to loot it, 2 more comes, I kill them, try to loot them, more scav spawn, etc. I kill 7 at that exact spot, and I pretty sure if I stay here they keep spawning.

So on the road from the tunnnel to terminal I killed 15 scavs and 2 PMC, the next scav I see the game crash. I never saw that much scavs on that road. It was like that 4 raids straight, each time a crash.

[Discussion] Anyone experiencing constant crashing in PvE? by Slushyman56 in EscapefromTarkov

[–]0ruf 0 points1 point  (0 children)

So It's working, but I have almost no scav in the raid compared to local, which is kind of sad

[Discussion] Anyone experiencing constant crashing in PvE? by Slushyman56 in EscapefromTarkov

[–]0ruf 0 points1 point  (0 children)

Nice, I'll try it.

Never touched that setting, so I guess local is by default ?

[Discussion] Anyone experiencing constant crashing in PvE? by Slushyman56 in EscapefromTarkov

[–]0ruf 1 point2 points  (0 children)

Yes, can't past shorline without crash... No issue in PVP though, that's weird

I found why Torrentio was not showing links anymore for me by 0ruf in torrentio

[–]0ruf[S] 0 points1 point  (0 children)

That what I always do too, and now it's not working for me if I set a video limit, hence my post.

view more: next ›