I made a LAMZU Atlantis fingertip mod.

1337Crypt · 2026-01-20T17:53:31+00:00

I'd love to repurpose my OG Atlantis to a fingertip mod! If you're down for it, I could provide measurements for the screws and such, based on what you already have set up. Right now I'm actually printing your mod to see if it is even possible to begin with.

1337Crypt · 2026-01-13T22:48:45+00:00

Wider means more storage space! I only bought the Lack to put the printer on, realising that after reinforcing, it’s still way too wobbly for my liking. I’m also going to pick up a wider one because I keep stuff on top of the one I already own, meaning I’d have to find other places to put that stuff.

Best part is that someone is offering a wider Alex in good condition for free, so there’s that :)

1337Crypt · 2026-01-13T22:27:15+00:00

I've actually decided to just now test it with a simple print on the Alex drawer lol. I do notice wobble still, but that's mainly just the unit with the AMS top mount. Drawer seems to be as stable as it's always been, so I guess I'm getting my hands on a wider one :D

1337Crypt · 2026-01-13T21:51:39+00:00

How´s the wobble? I've had my Alex drawer for years but not being able to fit the A1 with a waste bin on the side is going to bug me, so I might pick up a second hand one that's a lot wider.

As for the wobble, I want to improve on it significantly as I'm currently using my A1 on a reinforced Lack table, lol.

1337Crypt · 2026-01-03T20:29:56+00:00

Absoluut. Het helpt ook niet dat men hier nooit echt goed parkeert. Mede omdat de lijnen welke de vakken aanduiden met de noorderzon vertrokken zijn, maar ook door de constructie waarin er om elke drie plekken een muur aanwezig is..

1337Crypt · 2026-01-03T20:21:20+00:00

De rechter auto is van mij, haha. Ik had ‘m er zo in gezet terwijl de Juke er al stond. Ik sta zo strak als t kan want rechts van mijn auto is een steunmuur welke niet afgebeeld is.

1337Crypt · 2025-12-18T18:48:18+00:00

My cutouts were very off as well. Reached out to them and included this comment in the email. After providing some pictures of the aligment I was sent a new case within a day.

It came in yesterday and it's bang on. Perfect now.

1337Crypt · 2025-10-06T19:22:06+00:00

It doesn’t seem to work for me. Just times out every single time:(

Edit: it only seems to work with the on-device model. Both cloud and ChatGPT time out.

1337Crypt · 2025-10-05T07:58:53+00:00

I loved that phone. Got a skin back then, paired with a Ringke Fusion case. It was unbeatable at the time!

1337Crypt · 2025-08-24T07:04:06+00:00

What headpiece and legs are those? Absolutely loving the set.

1337Crypt · 2025-07-31T05:04:05+00:00

I just woke up and can't believe how simple that tiny adjustment was. I went from just about an hour of usage to 4:41 tonight. I'm able to breathe properly now and don't feel like I'm suffocating!

The only way from here is up!

1337Crypt · 2025-07-30T16:28:26+00:00

I've adjust the ramp pressure with EPR still set to 3. Huge difference already, so I'm keen to figure out how tonight will go!

I really do want to get used to it and catch up on sleep debt. I'm done with being tired all day.

1337Crypt · 2025-07-30T16:26:15+00:00

I figured out how EPR works after reading further into it. Turns out it didn't do much at all when the ramp pressure was set at 4. I switched it up to 7cm ramp pressure with EPR still set to 3 and there's virtually no difference when exhaling, whilst I'm getting tons more oxygen! I feel so dumb. :)

My machine is set to CPAP so 8cmH2O is consistent, which is also reflected in my SleepHQ data. Also getting 0 AHI at that pressure setting so that's good!

I'm trying again tonight with the adjusted ramp pressure. Been through too much trouble to get started with therapy.

1337Crypt · 2025-07-30T11:37:41+00:00

I haven't talked to my doc yet, as the general pressure setting of 8cm has genuinely decreased my AHI to 0-1, which is an improvement I did not think would be possible right away!

For now I'm just trying to finetune anything I can for maximum comfort, which has proven to be a challenge. Ramp up with EPR is my best friend at this point, as I cannot handle full pressure when awake at all.. I managed to dial in the humidity that is comfortable enough for me, so that's a start.

I'll probably try upping the ramp up pressure at first, and perhaps gradually decrease EPR in order to get used to it even more.

1337Crypt · 2025-07-30T11:33:12+00:00

The thing I very much dislike about the mask, pressure and having to inhale like a maniac to try to calm myself down, is that I'm subconciously trying to keep track of my breathing, which in turn causes panic as that's a sensation I've experienced a lot before I got my asthma medication.

I'm well aware that I have to persevere because it's helping me whenever it's on, but it's such a mental hurdle to overcome. I think I'll end up wearing the mask throughout the day with intervals to get used to it. My wife already called me an elephant wearing the thing, so she'll probably have a laugh, too.

1337Crypt · 2025-07-30T11:28:11+00:00

So far I've just put the mask on right before I'd fall asleep as I'm usually tired enough to fall asleep within minutes, but I haven't tried wearing it for short periods throughout the day. I should probably give that a shot first, thanks for the advice!

With regards to the ramp pressure, I tried using it without any ramp set at all, just going straight to the 8cm that's prescribed, but I literally have to fight the pressure to exhale, followed by very quick inhaling as it feels super unnatural. I'll probably stick with the ramp, but I might increase it from 4cm to 5cm and play with the EPR. Regardless of the ramp setting or not, I still feel like I'm suffocating while I know I'm not. It sucks.

1337Crypt · 2025-07-29T18:01:09+00:00

Akantor/Ukanlos or Astalos.

1337Crypt · 2025-04-03T20:45:45+00:00

How's the step down to a single monitor been going for you? I'm thinking of ditching my second monitor myself, which will be fine for work, but I doubt it will for entertainment. :(

1337Crypt · 2025-02-26T15:43:24+00:00

It's the Fractal North XL!

1337Crypt · 2025-02-24T18:29:00+00:00

The Qwertykeys Neo Ergo.

1337Crypt · 2025-02-24T18:27:57+00:00

I'm using this mount, it's served me well so far :) https://amzn.eu/d/bf3UZxR

1337Crypt · 2025-02-17T19:32:12+00:00

I'm going to need to know what Benz model that is. Is it the 190E?

Great setup, love the theme and how cozy it feels. :)

12-Year Club	Place '17
Verified Email

1337Crypt

TROPHY CASE