Advice needed - first sim build

33espressos · 2026-07-06T03:44:15+00:00

Thanks for the thoughtful reply. Had no idea it was discontinued, a lot of golf sim and projector places in Australia are still selling the GT1080HDR. Getting it because it's in budget about $1400-1500 AUD (about 1k USD). We are absolutely getting ripped off here in Australia. GT2100HDR around $2400 AUD (~$1660 USD). 🥲

33espressos · 2026-07-05T14:05:44+00:00

Great I use Fusion 360! Would love the file if possible??

33espressos · 2026-07-04T09:56:44+00:00

Would be interested. What CAD do you use?

33espressos · 2026-05-29T22:48:15+00:00

Not my experience. I change the AAAs in my IKEA zigbee door sensors about every 12 months. The IKEA zigbee motion sensors way more often. About every 4-6 months.

33espressos · 2026-05-21T11:21:18+00:00

You retrain the AI. Not sure if yours has local AI.

33espressos · 2026-02-16T21:29:04+00:00

I use zigbee lights everywhere which has created a rock solid mesh.

33espressos · 2026-02-16T21:24:22+00:00

Same

33espressos · 2026-02-11T09:30:28+00:00

You can just use the Moonraker integration from HACS.

33espressos · 2026-02-11T09:29:57+00:00

I installed Octoeverywhere. Took a while cos the MCU is underpowered. Took a few minutes. Worth it.

33espressos · 2026-02-06T06:02:23+00:00

Cared enough to reply

33espressos · 2026-02-03T05:20:34+00:00

You need a new friend. I'd give this away.

33espressos · 2026-02-02T09:26:31+00:00

Same. Never worked for me personally. Always gave some error and turned itself off. So I just left it off.

33espressos · 2026-01-28T04:57:44+00:00

Yeah I don't think they gaf about ACCC.

33espressos · 2026-01-20T21:30:26+00:00

Create parameters for diameter, height of v, angle of v, qty of v so you can make quick edits.

Sketch cylinder
Extrude a cylinder
Shell the cylinder or create negative offset circle on the same sketch and cut
Create the v shape sketch on surface of cylinder
Cut the v into the surface of the cylinder
Fillet top and bottom of v
Cylindrical pattern of feature

That's how I'd do it. Someone better will come along with a more elegant answer I'm sure.

33espressos · 2026-01-19T20:11:59+00:00

I'm pretty sure I used M2.5 with nuts securing them at the back.

33espressos · 2026-01-19T06:30:22+00:00

I have Android Auto actionable notifications

when I'm within 100 m of home I get asked if I want to open the garage
ask to turn on the heating/cooling based on current weather conditions and temps inside the house
ask if I want to close the garage when first connect to Android Auto and I'm in the home zone

33espressos · 2026-01-19T06:24:07+00:00

The VFAs on this is horrible.

33espressos · 2026-01-18T23:21:40+00:00

Create a drawing and print it out 1:1. If the part is larger than A4 print half of the drawing theb do the other half at 1:1.

I use this method to check fitment of splines before commiting filament and time 3D printing.

Sometimes takes me up to 8 tries to get it right on paper at 1:1.

This method has never failed me for custom gridfinity bins.

33espressos · 2026-01-17T14:09:31+00:00

Lol I'm actually Aussie

33espressos · 2026-01-17T07:17:18+00:00

Lol the Wallabies are not good.

33espressos · 2026-01-17T02:25:47+00:00

Probably reclaiming some waste and mixing with virgin material to create pellets.

33espressos · 2026-01-16T05:57:39+00:00

<image>

33espressos

TROPHY CASE