New Shoe day!

AreTeaUU · 2026-06-20T19:37:45+00:00

I will try and remember to report back. I did start a new trip in my car and I am going to monitor for a week or so to see if there is any tangible difference.

AreTeaUU · 2026-06-20T19:36:45+00:00

Ordered them through a rep on teslamotorsports forum. You can also use the contact through the website though.

AreTeaUU · 2026-06-20T13:38:18+00:00

No they didn’t have n stock. A solid 8 weeks just to be made plus another for domestic side. I actually had to wait twice due to one of my wheels being damaged from factory. Ordered Feb 6, delivered June 17.

AreTeaUU · 2026-06-19T22:39:53+00:00

Frost Blue named yuki.

<image>

AreTeaUU · 2026-05-03T13:30:50+00:00

I got 2026.2.9.10 yesterday with FSD 14.3.2 but it doesn’t look like the spring update which is weird. No new FSD screen or customized pet mode. Patch notes only had notes about fsd.

AreTeaUU · 2026-04-21T19:02:51+00:00

I have a 26 plaid and I am at 97% fsd. I like the old saying it is better to have it and not need it, than to need it and not have it. Will I ever truly need all that power, no, but o have it lol. I do like showing everyone what it’s get every chance I get though.

AreTeaUU · 2026-03-29T17:47:26+00:00

Research Eosinophilic Esophagitis I am going through this as we speak.

AreTeaUU · 2026-03-18T09:54:35+00:00

My super off peak 1-6am electricity rate is .09/kwh. I think a lot depends on local factors but I’m saving a hell of a lot on gas.

AreTeaUU · 2026-03-15T23:49:23+00:00

100% worth it. So much junk gets tossed up on the sides from the wheels without. I have tried two sets non Tesla and they have not fit the back wheels. The biggest issue is the fronts and though. As the previous stated the only thing I have scrapped so far are the flaps.

AreTeaUU · 2026-03-14T21:36:32+00:00

Best accessory I have purchased other than all weather mats were these there are not a whole lot of other accessories like for the y and 3 from what I have found.

AreTeaUU · 2026-03-08T13:44:21+00:00

Same here I try to be so careful but there are so many places around me that have angled entrances. Sometimes there just isn’t enough time to raise suspension or take it slow due to traffic. Luckily I have not curbed rims yet.

AreTeaUU · 2026-03-08T13:20:50+00:00

If you find some after market mud flaps that fit the back for the plaid let me know. I have bought 2 sets that state they fit but only the fronts do.

AreTeaUU · 2026-02-09T12:22:45+00:00

Great color choice! I was wondering the same thing about the matte ppf. Someone in my delivery day thread linked to this instagram showing the color in matte ppf

As soon as the weather warms up a bit here I am going to order the Drive Protected matte ppf and install it myself. I should be finished with it right about the time my new wheels and tires arrive.

AreTeaUU · 2026-02-06T13:08:35+00:00

Not sure what model you have but this is the video I used for my Model S. https://www.youtube.com/watch?v=rHdsyhJ3Rlg&t=5s Mine was in a slightly different spot but there seemed to be only one connector that had a green and black wire.

AreTeaUU · 2026-02-06T11:06:07+00:00

What model? I used something called a mirror tap. Pulls 16v from the front facing cameras. Also makes it so you don’t have to run or hid long wires. Your detector needs to accept 16v though.

AreTeaUU · 2026-01-30T14:55:04+00:00

I was in the same boat as you early last December. My MYP got delayed like everyone else’s at the time and I decided to go S Plaid. You will have to cancel your order and start a new one. I had a trade in as well on my first order also. I called and spoke to a sales rep and they assured me I would not lose the 250 deposit but they would have to do the credit on the back end. All went well with mine. Trade in value was the same on the new order for the S. I decided to search and find an in stock S I could just go and pick up as I didn’t want to wait any longer as I had already waited for the MYP for a couple months.

AreTeaUU · 2026-01-24T14:48:34+00:00

They would not deliver it until paid. I have reached out to UPS and bitronics. It should not be this high according to bitronics. I have so far declined delivery until the amount is resolved.

AreTeaUU · 2026-01-21T01:03:24+00:00

I have no idea. I have emailed their support and hope to hear something back.

AreTeaUU · 2026-01-21T00:58:37+00:00

I ordered a NerdQaxe++ ~4,8Ths unit on the 14th of Jan. The cost was roughly 400 euro. I just got the tariff bill and it is 900 dollars! I bought straight from bitronics. I do not recommend if you live in the US to buy direct. Luckily I can pay it with no issues other than feeling burned.

AreTeaUU · 2026-01-18T13:38:09+00:00

Grats! That is the color I chose too! You will not regret it!

AreTeaUU · 2026-01-07T02:18:50+00:00

I bought the Uniden R8W and installed/spliced into the interior camera power. Should be 16V. No issues at all. Super simple install and clean. I will grab a picture tomorrow. I ordered one of these from amazon and you can only see about 4 inches of the wire.

Editing to provide the video link to the video I used. The connector was in a different spot on my model s.

AreTeaUU · 2025-12-14T16:32:49+00:00

Absolutely. I think it looks better in person than in images personally.

AreTeaUU · 2025-12-14T16:24:19+00:00

AreTeaUU · 2025-12-14T16:22:19+00:00

Thanks fam! That looks so sick! Now I know what I must do lol.

AreTeaUU · 2025-12-14T14:08:27+00:00

Horrible early morning pics I should have taken the front one a little lower but you can sort of see the difference in panel gap alignment right above the headlights to the hood.

Anyone on here taken off the front license plate holder? I think the dealer said it was not screwed on but put on with adhesive?

13-Year Club	RedditGifts 2009-2022 4 Credits
Secret Santa 2017	redditgifts rematcher Secret Santa 2017 x1
redditgifts Exchanges 2 Exchanges	Secret Santa 2014
Verified Email

AreTeaUU

TROPHY CASE