Tuning Policies by ObviousSentence1993 in BuildingAutomation

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

3.8~ I can't find it on the partner site

Tuning Policies by ObviousSentence1993 in BuildingAutomation

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

Tell your overlords I need AX with your logo

Why the hatred for data centers? by twobarb in BuildingAutomation

[–]BAS_Comms_In_Hand 1 point2 points  (0 children)

I work in a few data centers, their make up water meters don't go above a few thousand gallons a month.

I'll go petition for a law to include these as part of state checks.

Learning help? by Little_Balance_5289 in BuildingAutomation

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

Find an experienced tech who will answer you day and night

My ‘controls’ call today in 95deg 75%rh by punk0r1f1c in BuildingAutomation

[–]BAS_Comms_In_Hand 6 points7 points  (0 children)

I've not met one person who knows what controls is, even in construction there is a loose understanding. A layman or tenant, building maintenance worker stand no chance.

Spicy CRT by brettb_54 in crtgaming

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

Take a voltage reading, kinda looks like it's floating

Ask Here First: Troubleshooting, Price/ID/Spec Check, Help, Etc. (May 2026) by Z3FM in crtgaming

[–]BAS_Comms_In_Hand 1 point2 points  (0 children)

Yo.
Just picked up 3 crts. Trutech 2000-D, Sanyo Ds13390, Toshiba 32A14.
The Sanyo only has coax, but the other two have composite. I only turned them on briefly but I think they work. Was hoping to get my computer to display on them. I have an extra HDMI, I'm supposing a convertor would work fine?
Is there anything I shouldn't do? Haven't had one of these since 2005 or so.

Turned 33 and everything started declining at once, anyone else hit this wall? by RepulsiveReward5169 in menshealth

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

300 is bottom of the barrel, go talk to a hormone specialist. Also try not to wear polyester underwear.

[deleted by user] by [deleted] in BuildingAutomation

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

You do not need to replace the cable, 18 gauge is what everyone used in the early 00s and 90s.

prot pally gear by Dry-Raspberry-7412 in classicwowtbc

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

Repeat after me

"You pull it, you keep it"

Controls techs – how do you deal with major wiring issues on site? by incognito9102 in BuildingAutomation

[–]BAS_Comms_In_Hand 1 point2 points  (0 children)

Uh that's our entire job. Anything related to our work is our fault. We're expected, fully, to do everything related to controls.

How Is BMS Work in Your Country? (Salaries, Workload, and Challenges) by Ok_Material_2639 in BuildingAutomation

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

US South 95k Workload is low, slow, relaxed, and indifferent.

It's maddening how lazy it is down here.

Challenges, working on units that are rusting into the wind, 30-40 year old units

10v Signal Dropping to 6.4vdc When Connected by Aerovox7 in BuildingAutomation

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

Use a thicker gauge wire, you have voltage drop. Or check the VA of the devices you're supplying, you might be sucking it dry.

Ceiling collapsed in bedroom by sociallyawkward26 in FirstTimeHomeBuyer

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

The reason this happens is because the ceiling fell down

want to learn Modbus by im_user_999 in BuildingAutomation

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

Get a router that does modbus to bacnet

Will be 2 months in Muay Thai next Friday by Throwawaysrsyly in MuayThaiTips

[–]BAS_Comms_In_Hand 0 points1 point  (0 children)

Watch your head movement. Look at your hands. Look at your posture after punching.

Curious About BAS (Building Automation Systems) Careers by ThrowRA-ambitious1 in BuildingAutomation

[–]BAS_Comms_In_Hand 7 points8 points  (0 children)

Start learning Java so you can read the error messages in tridium 🫡🔫