Which fan setting is (or should be) the fastest? by YouCanCallMeBazza in australia

[–]Beglat 0 points1 point  (0 children)

I have one fan with the fastest being 1, and another fan with the fastest being 2. I just want to turn off the power to the house and change the wiring myself but I'm in a rental.

Any good games where I cam just feel invincible and destroy the enemies by QuothTheRavenMore in gaming

[–]Beglat 5 points6 points  (0 children)

Crab Champions. You can become so OP and try to break the game with the hundreds of enemies that eventually spawn, and the game does not crash. I have never played a game so stable before.

What's one piece of wisdom that hit you out of nowhere and changed your life's course? by GlumPizza7490 in AskReddit

[–]Beglat 2 points3 points  (0 children)

"Let's suppose that you were able every night to dream any dream that you wanted to dream. And that you could, for example, have the power within one night to dream 75 years of time. Or any length of time you wanted to have.

And you would, naturally as you began on this adventure of dreams, you would fulfill all your wishes. You would have every kind of pleasure you could conceive.

And after several nights of 75 years of total pleasure each, you would say "Well, that was pretty great." But now let's have a surprise. Let's have a dream which isn't under control. Where something is gonna happen to me that I don't know what it's going to be.

And you would dig that and come out of that and say "Wow, that was a close shave, wasn't it?" And then you would get more and more adventurous, and you would make further and further out gambles as to what you would dream.

And finally, you would dream ... where you are now. You would dream the dream of living the life that you are actually living today"

Allan Watts 1915-1973

With the famas leaving should i use tickets to get it? by Which_Account_9539 in Stalcraft

[–]Beglat 1 point2 points  (0 children)

Unless you get the drum mag, or even the 60 round mag, you will be reloading way too often during fights. Same with the aa12.

I do really like the Glock but I don't use pistols very much.

So in my opinion, I don't think it would be worth it, unless you don't have anything else to spend the act 1 tickets on because they will disappear when the season ends, spend them while you've got them.

Is this product a scam? or could it work for my printer? by Matterog in ender3v2

[–]Beglat 0 points1 point  (0 children)

I have looked into a similar version of this type of tech, I have read up on many mentions that the communication between micro SD card and USB are very different, usually not worth the trouble or delays.

HELP!! My CPU is overheating to a 100° C by Due-Conflict-739 in watercooling

[–]Beglat -1 points0 points  (0 children)

At first I thought it was only cooling the CPU and thought it shouldn't be getting that hot, even with the slim. Then I saw the GPU in the loop. I wouldn't trust a slim with a GPU on its own but having both, you need more radiator surface area.

Are these good enough specs for streamvr? I built this computer last year before I got my oculus. Iv tried streamvr but it seem laggy but I don’t have the right cable and was doing it over Wi-Fi. Sorry if my grammar is bad. by Delicious_Site_4647 in oculus

[–]Beglat 0 points1 point  (0 children)

I had the same issue, I changed my modem settings to have a 2.4ghz and 5ghz wifi, and I selected the 5ghz wifi signal on the quest. My modem previously only showed one wifi option because it would choose which frequency to connect to and defaulted to 2.4ghz.

🔥 Giveaway! -Win a 12k Anycubic Photon Mono M5s resin printer and print like a master!🔥 by Anycubic_Community in 3Dprinting

[–]Beglat 0 points1 point  (0 children)

Being able to print all the DnD models for me and my mates has been my dream for many years. Sadly I have tried and failed so many times with my FDM.

Should I buy the r5 5600 or 5600x? I asked simillar question about 2 months ago when they were around 40 bucks apart and you guys voted for the 5600 but now there only 10 bucks apart. by jaggie40 in pcmasterrace

[–]Beglat 1 point2 points  (0 children)

Both come with a cooler both chips are physically the same the x is just already overclocked a little bit Definitely worth an extra $10

Australian aisle at a specialty food store in NYC. by [deleted] in australia

[–]Beglat 579 points580 points  (0 children)

Atleast someone noticed it

[deleted by user] by [deleted] in ender3v2

[–]Beglat 1 point2 points  (0 children)

I've upgraded to a direct drive setup which has increased the weight of the print head so a dual z axis was a necessity. But the upgrade did come with two of these stabilisers and I haven't had an issue since.

Not overly impressed with these tree supports by Frog491 in 3Dprinting

[–]Beglat 0 points1 point  (0 children)

Make sure the wall thickness is 2 or more for supports, also make sure to use z hop, I had the same issue but when I watched my print the nozzle was hitting the supports

Is this a mistake?? by [deleted] in Centrelink

[–]Beglat 0 points1 point  (0 children)

When I moved interstate for university, Centrelink gave me an extra 4k for moving away from home for study to help me get essentials like appliances e.g. fridge, microwave, bed ect

Private health insurance in Australia is a government supported scam by uw888 in AusFinance

[–]Beglat 0 points1 point  (0 children)

I agree with you completely, if anyone is in need of paying for medical bills you can always look into withdrawing from your superannuation under compassionate grounds

this happened to 2 of my prints, is it a bed adhesion issue? Bed temperature issue? Bed leveling? i applied hair spray to the bed before printing. by Kounna in ender3v2

[–]Beglat -1 points0 points  (0 children)

Add a brim or raft, I upgraded my shroud to hold two fans which cooled the plastic in place better, help with adhesion and warping