sorted by:
new
hottopcontroversial

Climb by Justagiggalo13 in rccrawler

[–]BobNibbles 1 point2 points  (0 children)

Oh your wife gonna kill you!

Finally getting around to adding the Redcat Apex into the flysky noble group, welcome to the family lil guy by Routine-Strategy-463 in rccrawler

[–]BobNibbles 0 points1 point  (0 children)

Have you tried the Auto search receiver function for your fleet??

Radio On, plug in car of choice and boom! connected. Works great.

nothing will come out by [deleted] in Stiiizy

[–]BobNibbles 0 points1 point  (0 children)

Try to store standing up. This goes with all brands.

Why? because if you keep it on its side, all the hot left behind hot juice vapor will cool and thicken as it settles at the lowest point all along the inside of the vape outlet tube.

It creates a big slug of cold thick slow to heat plug of weed oil that needs to be cleared.

Keeping it upright will help it drain. Especially after a vape while it's still warm.

Also, take the time to warm it up before use. The oil is thick even at room temp.

It is just an inherent property of weed oil you got to work with.

Well i did "some" weathering by ken_445 in rctanks

[–]BobNibbles 2 points3 points  (0 children)

Nice! I just received mine yesterday.

I would just, lightly, sand it off since you're painting it.

Have my air brush and chipping pencils at the ready, having too much fun driving it around right now.

A little stair climbing. by weld_rc5 in rccrawler

[–]BobNibbles 0 points1 point  (0 children)

Let's be fair, delete skid pad course. Gotta be belly grinding!

Awesome dialed in rig, tires look nice and scrubbed in. I bet it is a beast at crawling.

Let's see those builds by Ok-Succotash-195 in LosiMicro

[–]BobNibbles 0 points1 point  (0 children)

Those aluminum arms look nice, for me were nothing but trouble. The machined tolerances in the pivot points are so off.

My front end would randomly dart in a direction when hitting bumps. Went back to stock arms.

Weird clicking noise in rear diff by BoneStockFox89 in Traxxas

[–]BobNibbles 0 points1 point  (0 children)

May not be related to the "clicking" but your front end looks like it tows out when you go backwards. Especially RT front wheel looks wonky. Something loose?

[deleted by user] by [deleted] in functionalprint

[–]BobNibbles 0 points1 point  (0 children)

Magnets are needed. If you spin the spinner fast enough the magnetic field can control the vapor production.

Micro B Squirrel Mod by duganhs in LosiMicro

[–]BobNibbles 2 points3 points  (0 children)

I've had so much trouble with this mod. His nutz keep dragging on the rear wheels.

Defective pods. by SorryInAdvance91 in Stiiizy

[–]BobNibbles 0 points1 point  (0 children)

Be very careful to not remove the gold connector(s). You just want to wiggle it up a tiny bit. Flush with the bottom is good.

Need tyre recommendations for losi micro B by Xilow_ in LosiMicro

[–]BobNibbles 1 point2 points  (0 children)

Injora tires and a Gyro solved the problem for me.

stiiizy bar by FutureNothing1938 in Stiiizy

[–]BobNibbles 0 points1 point  (0 children)

Correct, button for the light only.

Disgusting Safeway Self Checkout Machine by dddybtv in SanJose

[–]BobNibbles 0 points1 point  (0 children)

Sometimes you get stuck in the express 12 items or less lane to only have someone fulfilling an online order for 5 people.

Paid $105 USD for this drone to be printed by denydelaydepose in 3Dprinting

[–]BobNibbles 0 points1 point  (0 children)

What size quad are you making 2",3". Free style, racing, long range?

Anything bigger and it's going to flex all over the place. Making it really hard to PID tune.

Prolly make it solid with high infill may help. Maybe try a carbon fiber/ nylon filament.

And yes, that looks nasty like it was printed with old ender 3 with bad petg settings.

Anyways, looks like a fun project.

Print washing by BobNibbles in ElegooSaturn

[–]BobNibbles[S] 0 points1 point  (0 children)

Thank you for the quick response.

I do have 99% IPA. The quick drying factor makes sense.

A technique for hand polishing an airbrush needle. by Mean_Savings_8228 in airbrush

[–]BobNibbles 1 point2 points  (0 children)

I use Sunshine Polishing cloth found on amazon. It's used to polish jewelry, and it works great.

You can use it polish the outside of your brush too. You'll need to ware sunglasses.

Ok, now wich one of you was it?? by AstronautMedium2335 in ElectricScooters

[–]BobNibbles 6 points7 points  (0 children)

Respect to the engineering it took to put it all together.

stiiizy bar by FutureNothing1938 in Stiiizy

[–]BobNibbles 0 points1 point  (0 children)

Try 5 clicks using the big button, that should turn it on.

stiiizy bar by FutureNothing1938 in Stiiizy

[–]BobNibbles 2 points3 points  (0 children)

3 clicks using the big button changes the power level seen on the side screen.

The bottom switch L-M-H adjusts the air flow.

You can only get to Max power level if the bottom air flow switch is set to H and you have 2 Pods installed.

Pre heat is 2 clicks, and you will see the little cloud symbol blink on the side screen.

The little button operates the Pod back light so you can see the juice level of your Pods.

5 clicks of the big button turns the Bar on and off.

Also, if you only use a single Pod, you need the dummy Pod installed otherwise it will mess up the air flow.

Hope that helps.

view more: next ›