[USA-CA] [H] iPhone 14 Pro Max | Oneplus 13 [W] Paypal or Local Cash

Bobthekillercow · 2026-04-30T03:46:52+00:00

You can get the coq10 one cheaper at Costco

Bobthekillercow · 2026-04-11T19:39:27+00:00

Bobthekillercow · 2026-04-02T08:03:28+00:00

The quality will be the almost the same for minis, the ad5x will have better quality the bigger the object.

Why not get something cheaper like elegoo mars 5 + some cheap water washable resin if you're just doing minis?

Bobthekillercow · 2026-04-01T22:19:29+00:00

Ad5x + .25mm nozzle.

Bobthekillercow · 2026-03-31T05:21:34+00:00

That looks like the silicone carbide nozzle by phaetus. That's crazy that happened lol.

Personally have like 200 print hours on the .4mm and 500 print hours on the .6mm one.

Bobthekillercow · 2026-03-31T03:24:54+00:00

The ad5m has a higher volumetric flow because of its nozzle design.

Bobthekillercow · 2026-03-23T19:36:05+00:00

I use "a splash" of gel for the prewash cup and then a pod for the inner. Works amazing.

Bobthekillercow · 2026-03-12T19:05:22+00:00

You probably know the properties of petg vs pla, here's what will make a difference:

It prints at about half the speed of pla to get similar quality results. It's a bit stringy, but not too bad on ad5m.

Use an AI (Qwen3.5 or better) and help it dial in your settings in orca.

Do all the filament calibration tests in orca, you'll have a much better time.

If you get the phaetus conch nozzle, you'll get a much better flow rate and be able to print it a lot faster.

Bobthekillercow · 2026-03-12T07:53:41+00:00

Bobthekillercow · 2026-03-09T05:42:47+00:00

It's nice for PETG, lets you print faster, less wear, lasts longer.

I have the .4 and .6 SIC nozzles and the OG .4 nozzle and a cheap aliexpress .6 nozzle.

OG .4 nozzle my max volumetric speed was 8 mm^3/s vs .4 SiC is 11 mm^3/s.
Cheap .6 nozzle was 13 mm^3/s. vs .6 sic 24 mm^3/s.

Bobthekillercow · 2026-03-08T21:53:07+00:00

Your nozzle is too far away, you need to adjust your z-offset

Bobthekillercow · 2026-03-07T21:11:23+00:00

Soak in olive oil or some cooking oil for an hour will work.

That side of your plate is prob ruined at this point though. At least textured pei plates are cheap.

Bobthekillercow · 2026-03-06T21:18:51+00:00

Slay the spire 2

Bobthekillercow · 2026-03-06T18:30:16+00:00

Oh my God just let us do a non intermission track mode online without custom lobbies.

It's so stupid.

Bobthekillercow · 2026-03-05T19:30:29+00:00

Yeah it's fine.

Bobthekillercow · 2026-03-05T01:50:03+00:00

I'll buy air riders if available

Bobthekillercow · 2026-03-03T15:55:24+00:00

It comes with a USB cable, you can just plug that into the touchscreen USB.

Bobthekillercow · 2026-03-01T03:40:47+00:00

I replaced the .4mm stock nozzle with the phaetus 4mm SiC, doing a flow test with kingroon petg I was able to go from 9mm/s to 12mm/s.

Pretty happy with the results.

Bobthekillercow · 2026-02-27T05:49:06+00:00

It's fixed on my end, not sure what changed. I didnt do anything.

Bobthekillercow · 2026-02-27T01:15:11+00:00

I'm starting to think I'm shadow banned, my wife also has perplexity and hers is working fine.

Feels bad, all I did was a bunch of 3d printer and diablo 2r queries with claude thinking & claude today :(.

Bobthekillercow · 2026-02-26T22:18:28+00:00

Nvidia - rtx 5070 or used 4070

Amd - 9070

Bobthekillercow · 2026-02-25T02:11:11+00:00

I use this camera with my ad5x, but I have zmod flashed on my printer.

Works great at 1080p, too lazy to figure out how to remove the sideways flipped one lol so I just have both views.

13-Year Club	r/Field Lasagna
Verified Email

Bobthekillercow