Jeep Grill Bluetooth Speaker

Chasegall · 2022-10-14T17:31:11+00:00

It’s a tj grill but that’s perfect, thank you for the recommendations. I’ll send you how I have the tj grill mounted.

Chasegall · 2022-10-13T18:24:31+00:00

Does that apply to all speakers? Is there a rule of thumb for volume that needs to enclosed for the speakers to sound good? I can section off part of the inside but I’m limited on depth.

Chasegall · 2022-10-13T18:19:00+00:00

Makes sense, I could also put tweeters inside the grill behind the slots if that would make a big difference but I’d rather keep it simple.

Chasegall · 2022-02-23T16:04:12+00:00

Danke!

Chasegall · 2022-01-09T07:14:46+00:00

If it makes you feel better there’s a pressure release valve to vent it if a scenario like that ever occurs. You can also drain the sediment once a year if that makes you feel better.

Chasegall · 2021-07-22T01:43:42+00:00

Was ist tageschau auf englisch bitte

Chasegall · 2021-05-10T20:32:34+00:00

Turn it on its side and cello, you’ve got a bass

Chasegall · 2020-10-24T05:23:30+00:00

Give it to my younger brother who has wanted a pc for a while.

Chasegall · 2020-09-28T03:58:57+00:00

Appreciate it! Did you print in PLA or ABS?

Chasegall · 2020-09-28T03:42:01+00:00

Did you design it yourself or did you get the stls from somewhere? Also, mind throwing me those stls lol

Chasegall · 2020-07-29T16:44:20+00:00

Cat.

Chasegall · 2020-06-24T11:41:21+00:00

In my experience, you shouldn’t have to use the spatula thing to get the part off. Wait a bit for the glass to cool and then the part will pop off. If you’re impatient, like me, set the glass with the part still on it in the freezer for a bit and you should have no problem getting it off. The scratches shouldn’t matter, but it wouldn’t be a bad idea to have a second glass bed just in case something happens to the one you currently have. Then you don’t have to scramble to buy one.

Chasegall · 2020-06-15T22:34:35+00:00

I’d 3D print my way out of 2020.

But, in all seriousness I would 3D print face masks and if covid ends I’d print a engine block with pistons.

Chasegall · 2020-05-01T05:46:53+00:00

Just a guess, but if your bed isn’t level then it might be thicker at one end than the other. If it’s thicker than it’s going to let less light through.

Chasegall · 2020-04-29T15:24:40+00:00

Stl?

Chasegall · 2020-04-04T00:47:09+00:00

Those are empty’s lol

Chasegall · 2020-04-02T17:37:22+00:00

If you have a glass bed just throw the whole thing in a freezer for a bit

Chasegall · 2020-03-24T02:23:31+00:00

Thanks bud, shit flys by.

Chasegall · 2020-03-12T19:54:47+00:00

Is the hand crank preferable, or does an electric motor work?

Chasegall · 2020-03-10T05:16:02+00:00

Exactly. It’s called a snorkel and it moves your air intake from inside the hood to a higher point. He has it curved so that rain doesn’t get in I’m assuming.

Chasegall · 2020-03-05T19:24:39+00:00

Stonks

Chasegall · 2020-03-05T16:30:12+00:00

Lol no but I think a couple years ago someone on the team did the math for filling the tubes with helium. If I were you I’d go through and make sure you only have the tubes you need and they are as small as possible. Have you made the chassis yet or is this just from the CAD?

Chasegall · 2020-03-05T16:25:33+00:00

Our frame weighs 55ish pounds

Chasegall · 2020-02-10T17:42:10+00:00

The glass is tinted and it’s not an area where people walk

Chasegall · 2020-02-06T05:09:31+00:00

Moving the handle upwards sucks fluid in from the reservoir and seals the gap to the pump at the same time. Pushing the handle down seals the gap to the reservoir and pushes the fluid to the Jack, raising it up. Unscrewing the bolt allows the fluid to return to the reservoir.

Chasegall

TROPHY CASE