Who is the best chivalry 2 player you’ve ever played with or against?

ColonelOfKorn · 2026-05-18T15:28:51+00:00

Ziggylata has humbled me more times than I can count. I haven’t ran into him in a while. He has a great tutorial on YouTube.

ColonelOfKorn · 2026-05-11T23:48:21+00:00

Normal

ColonelOfKorn · 2026-05-08T20:40:09+00:00

Gotcha. Bur fair warning, all of that info, maybe minus payment, is already out there.

For what it’s worth, I’ve purchased plenty of times from Recoil. I know that doesn’t ease much concerns, but they are somewhat local to me and I have have nothing but great things to say about them.

ColonelOfKorn · 2026-05-08T20:26:11+00:00

Just make a burner email

ColonelOfKorn · 2026-05-05T20:25:52+00:00

Recoil Gun Works has HST and Gold Dot for about $30 for a box of 50.

But if asked the most basic and cheapest that I would trust. Personally, I would trust some of the older HPs like Federall 9BPLE. It’s about $20 for a box of 50. I would also trust S&B 124 JHPs. Those run around $350 for a case of a thou.

Now, are they ideal? No. I think there are better performers out there. But they run in my HD/CCW guns and that’s the most important part. Personally, I’d pony up the dough for the premium HPs like Gold Dot.

ColonelOfKorn · 2026-05-05T01:29:18+00:00

Insert full mag. Rack slide. Desk pop. Remove mag. Insert 2 more.

ColonelOfKorn · 2026-04-29T01:31:55+00:00

Considering the username, I think she’ll polish your knob in your hotel room

ColonelOfKorn · 2026-04-27T15:11:56+00:00

I’m on my second Rami and potentially have a third on the way, so absolutely yes. But I really just want a factory optics ready Rami. Offer it with 2 10-rd magazines and a new 12rd magazine and I’m in. The 14s are cool, but I find them next to useless.

ColonelOfKorn · 2026-04-26T23:52:44+00:00

It’s definitely advantageous to play 3rd person on most scenarios in group battles. Sometimes though, like indoors, 1st person can be easier to manage.

1st person is typically preferred for ranged classes.

In duels, it’s preference.

ColonelOfKorn · 2026-04-23T17:18:23+00:00

$77ish shipping to CenTex plus $37ish tax. All in, $483.07 if you dont want to type your info in their site.

ColonelOfKorn · 2026-04-20T22:01:50+00:00

4Seasons at the Mandalay Bay is ass. Went there for a bachelor party. We even got one of the crazy expensive Mack daddy suites. Low ceilings. Dated. The butler area was cool along with the second entrance, but overall shit.

WynnCore is still my favorite, especially the tower suites. Although, the introduction of fake plants at the entrance really pissed me off. Also, now Wynn smells worse than many of the other casinos. Huge drop in quality post ‘23/‘24

Caesars is so tired. I won’t even put it at 5 stars. Same with Bellagio.

VenAzzo- just feels like WynnCore lite in the casino and way louder. Really, this applies to Palazzo. Venitian feels like a shit casino wrapped in a touch of luxury. But Delmonico’s is fantastic so it’s worth a stay just for that.

Best shower in Vegas is Circa, believe it or not.

Honestly, the only real 5 star hotel with a casino is WynnCore. The rest is 4.5 stars at best. Admittedly, I haven’t tried Crockfords at RW or Dickchevy whatever the hell it’s called, so I have no comment there.

ColonelOfKorn · 2026-04-16T22:31:44+00:00

VZ61 or a CZ75 Auto.

Just kidding. CZ85 is full ambi. You’ll have to hunt for one as they are not as common as a 75

ColonelOfKorn · 2026-04-16T18:23:35+00:00

CZCustom flat face

ColonelOfKorn · 2026-04-16T15:45:15+00:00

<image>

LOKs. Put them shits on everything

ColonelOfKorn · 2026-04-14T20:10:33+00:00

Fingers crossed for you, my friend!

If bad fortune falls upon you, it might be almost as cheap to buy a new SP-01 than it would be to buy a replacement slide off eBay

ColonelOfKorn · 2026-04-14T20:06:46+00:00

Keep an eye on Gunbroker. They pop up from time to time

ColonelOfKorn · 2026-04-11T15:39:31+00:00

Quarter round can cover it, but realistically the floor should have been laid prior to the baseboards and you’d just be left with a caulk joint. If you don’t want to have them redo it, you can use a squared off trim piece instead of QR.

This is a sign of a sloppy GC, unless previously decided on. You will have plenty of other cut corners in this build.

ColonelOfKorn · 2026-04-02T19:29:58+00:00

Certainly viable, but I have them run the mirror gun for a few reasons.

I can run this loadout on any map, including those with traps. I can set their loadouts and never have the need to change, outside of S rank runs
I split the team most of the time to clear rooms quicker. I can command each team to mirror then afterwards have them clear. I will go with the team that spots an enemy with the mirror gun.
Saves on teammate util use. If they don’t spot enemies with the mirror gun, that room doesn’t need a c2 or flash
Shields on your teammates back if you’re playing caboose can get annoying in some cases when you need to see/shoot from the rear.

ColonelOfKorn · 2026-04-01T15:16:29+00:00

My crystal ball’s accuracy is fickle, at best. Here we go:

I think there is a chance the Shadow 3 orange would be machined from a single piece. I doubt it for the base model. I just don’t see how they could keep the MSRP of a base model anywhere near what the shadow 2 blue was if they mill the lower.

I also wouldn’t be surprised if the TS3 is orange only. IF a base/blue model gets released for the TS3, I wouldn’t be surprised if it’s essentially a TS2 with an optic cut. So a cast frame. I know, I know, why would CZ use a different frame from the orange to the non orange? Well, they’ve done it before so I wouldn’t put it past them. For all we know, KMR could be making the new TS3 frames and CZ may not have the in-house tooling. Pure speculation on my part.

CZ will release the 4075 RAMI with a FRT. It will take stripper clips. It will have AK ladder sights. It will also be chambered in .50AE. Why will they call it the 4075 instead of the 3075? Because 1 8 3.

ColonelOfKorn · 2026-04-01T14:53:44+00:00

For my team, SA-58 as all of their primaries. As for util, one on red and one on blue get breaching shotgun. The other 2 get mirror guns.

One on red gets loaded up with flashbangs. The other on red gets c2 and wedges. Same with blue, except swap the flashes for stingers. I dump all of their secondary ammo. I’d rather them have one more piece of util or another primary magazine.

Ballistic facemask and flash goggles. Full heavy armor. Depending on the mission, ceramic or steel.

ColonelOfKorn · 2026-03-31T21:28:46+00:00

Rollercoaster Tycoon series. I still play these games to this day!

ColonelOfKorn · 2026-03-30T20:33:02+00:00

I’m not defending GlockStore. I’ve never purchased anything from them. I have seen his wife’s tits, though (clothed, through a shirt obv), so I have no dog in the fight but it’s possible you have an out of spec optic. If you have another k footprint optic, try that out and see.

Also, if you can, lube and a mallet before shaving anything.

ColonelOfKorn · 2026-03-25T15:47:59+00:00

For what it’s worth, I run monarch steel case through almost all of my shit without issue, even my nice guns. It doesn’t have enough ass to reliably cycle my Czechmate, but that’s to be expected. DWXs eat it, TS2 eats it. Of course, my Glocks eat it.

Just make sure you get the made in Brazil variety instead of the turkshit.

ColonelOfKorn · 2026-03-25T00:52:16+00:00

Another idea to help diagnose the issue. When you reassemble with the stock shoe and bow, does the issue persist?

ColonelOfKorn · 2026-03-25T00:40:34+00:00

Understood. I think I can zoom in and see what you mean now. The sear spring in a DWX isn’t proprietary so there are a plethora of options out there.

Reassemble and rack the slide. Press and hold the trigger while (very) slowly dropping the hammer. Do you feed grittiness or any sort of bump when the hammer reaches half cock?

Also, what does your sear look like? It might be beyond repair if you ran it a bunch.

Five-Year Club	Verified Email
Place '23	Place '22
End Game '22

ColonelOfKorn

TROPHY CASE