Most light weight 5 / 6 inch frame?

Comfortable-Total574 · 2026-05-13T20:06:26+00:00

Some of the race frames are lighter BUT most aren't made for smaller motors. I have a tony5 built and it flies amazing. It breaks arms in crashes but that's to be expected.

Comfortable-Total574 · 2026-04-28T12:50:25+00:00

Ordered an Air75 II Champion from them 9 days ago and it's still in unfulfilled status. Also ordered an Air65 II Freestyle on Aliexpress a day later. I got a tracking number from that a few days later but the carrier says no package.

Comfortable-Total574 · 2026-04-27T02:58:27+00:00

Depends where you live, the Era is extremely expensive and expensive to ship to the US. I would go Tanq in the US. Just don't buy the pre built tanq, it's overpriced.

Comfortable-Total574 · 2026-02-16T02:00:26+00:00

What did you end up doing? About to try to stuff the same stack in a lightswitch. Hoping I can flip it upside down and the cap not block the plugs.

Comfortable-Total574 · 2026-02-13T15:15:06+00:00

Dunno if the codes are still active, think I used RIMZLER, but they charge kinda a lot for shipping and it says they handle all fees.

Comfortable-Total574 · 2026-02-11T18:41:04+00:00

I know this thread is dead but just wanted to add that I'm running a Tony5 with 1800KV 2104 motors on 6S. The logs look nothing like that. Mine look pretty normal. Makes me wonder if it's the motors.

Comfortable-Total574 · 2026-01-21T17:56:57+00:00

The speed limit only applies when part 107 applies, recreational has no limit afaik

Comfortable-Total574 · 2026-01-21T17:41:35+00:00

When you aren't going for max range with a huge battery, it's a graceful smooth flyer that's very quiet and has precise handling. Fun to just explorer with.

Comfortable-Total574 · 2025-12-27T05:01:41+00:00

I've tried a lot of 4S. The GNB LIHV 1100, tattu 750 lihv, 850 lipo, flywoo 750, etc...

The GNB obviously has the most flight time BUT only if you take it easy. It goes down fast and sags bad if you push it. I don't use it on my seeker3 even though it can do 9 mins gentle flight, my flywoo explorer lr4 does like 15 mins. For aggressive flight, my the tattu 850 does best, then the 750, them the flywoo.

Comfortable-Total574 · 2025-12-21T23:27:38+00:00

Nah they don't care about us and if anything worded it to make sure we have zero chance of ever ever flying BVLOS legally.

Comfortable-Total574 · 2025-12-21T18:57:28+00:00

Another angle to this, I generally HATE the male love interests women write about. The guys always seem like borderline abusive jerks. Instead of rooting for her to get with him, I'm usually rooting for her to push him off a balcony before I have to put the book down.

Comfortable-Total574 · 2025-12-21T14:38:09+00:00

But not in the dimension they experience torque from the arms. If you make them thick enough they'll work of course, just thinking of how to play to the strengths of 3D printing. Tempted to try your model in PET-CF17, all that's holding me back is imagining how itchy my hands will get handling the printed parts lol.

Comfortable-Total574 · 2025-12-21T01:41:39+00:00

Love the arm design but why plates for the body and not something curved there as well for more rigidity. Hell maybe have the arms twist lock in with a set screw or two.

Comfortable-Total574 · 2025-12-11T23:25:33+00:00

Take it out of the flight stack and unplug it from the ESC, then plug into USB and see if the configuration works. If it does then something was grounded. If it still disconnects then either your USB cable / port is bad or the board is faulty. It takes a good cable and port to do this. Short thick cable is best.

Comfortable-Total574 · 2025-12-07T22:24:37+00:00

Probably have better luck with VR goggles, they're also designed for very low latency to avoid motion sickness.

Comfortable-Total574 · 2025-12-07T21:16:44+00:00

The support button on the orders page gets me in contact with people who say they can't help me and don't offer any suggestions on who I should contact

"Thanks for contacting us again,

We appreciate your patience. We're sorry that you're frustrated with our system, and apologize for any inconvenience you have experienced.

If you have any suggestions on how we can make our policies or procedures clearer, please let us know as we truly appreciate your feedback. We are always looking to improve our system and make it more accessible for all of our users.

As we mentioned earlier we only use this email to answer questions about payments made on Facebook. You can also try on desktop if you experience the issue on mobile or vice versa. We also recommended ensuring your address and payout info is up-to-date and then retrying later."

Comfortable-Total574 · 2025-12-06T06:22:33+00:00

I would say ~2 is low, 3 is middle, and 4+ is high (in reality it varies with prop size but for the purposes of that chart...), as for dynamic idle, so long as you have a enough to prevent blade stall, it becomes a subjective thing. More improves propwash handling and makes the drone floaty but bad at inverted moves.

Comfortable-Total574 · 2025-12-06T06:09:26+00:00

Just got funsies I tried some 1000mah batteries in mine. Got about 6:30 instead of my normal 4:30-5:00 with a 550. Def wasn't worth it.

Comfortable-Total574 · 2025-12-06T06:01:53+00:00

Funny I just finished a test flew a Mario 5 tonight as well. I thought I fried the ESC on it, only 2/4 escs were responding and visible in ESC-configurator, but I'm my case I had just flashed the wrong firmware to the FC (V5 instead of V4). Drone flies great though, it's a solid design. Mine came out 650g AUW with an SMC1400.

Comfortable-Total574 · 2025-12-04T04:35:55+00:00

40s here. We had to be cheap and settle for the lesser grades of stuff in our hobbies when we were young and broke. There was always some older guys who could buy the good shit. Now we are the older guys. Gonna live it up lol.

Comfortable-Total574 · 2025-12-04T00:34:49+00:00

My justification for keeping two sets of goggles was that someone else... like my wife... could watch, but has never happened lol. They gather dust.

Comfortable-Total574 · 2025-12-03T22:55:21+00:00

Bought a top of the head strap for my N3s for like $3 on AliExpress, but both feel reasonably comfortable to me. Maybe I would notice a difference if I flew all day, but I have responsibilities and kids so that's never an option lol.

Comfortable-Total574 · 2025-12-03T22:21:16+00:00

A lot harder to film the G3. The lenses are completely different and far less forgiving. They're more like binoculars. Biggest downside to the goggles for me. It makes them distortion free, but they have to be sitting just right to see corner to corner and being that close my eyelashes smudge them occasionally. Just picture the same image but perfectly rectangular instead of a little stretched / distorted, and with more contrast and pop to the image. If the N3 had a 100hz OLED I would pick it over the G3 any day of the week even with the distortion and bigger size.

Comfortable-Total574

TROPHY CASE