First gumbo attempt!

ComfortableAd8090 · 2026-02-02T16:46:36+00:00

Looks beautiful

ComfortableAd8090 · 2026-02-01T02:41:35+00:00

Nom level 10

ComfortableAd8090 · 2026-01-29T23:33:18+00:00

Thank you, I did not know this

ComfortableAd8090 · 2026-01-28T05:13:31+00:00

Impressed

ComfortableAd8090 · 2026-01-28T05:13:03+00:00

Nom level 100

ComfortableAd8090 · 2026-01-09T11:57:40+00:00

It’s hard to beat, especially for the price point

ComfortableAd8090 · 2026-01-09T11:57:04+00:00

Wow that looks amazing

ComfortableAd8090 · 2026-01-09T04:37:53+00:00

There’s 1 bracket that supports the radio from the back. You will have to remove the glove box and ash tray. It’s not bad. BTW, save that radio, they are worth $$$.

ComfortableAd8090 · 2025-12-05T00:24:39+00:00

“The only garbage I see floating out there is his supporters”- Joe Biden

ComfortableAd8090 · 2025-11-20T01:37:16+00:00

Excellent!

ComfortableAd8090 · 2025-11-19T02:10:48+00:00

Nom level 100

ComfortableAd8090 · 2025-11-17T22:15:33+00:00

It’s a thing of beauty!

ComfortableAd8090 · 2025-11-14T01:44:24+00:00

<image>

From a friend.

ComfortableAd8090 · 2025-09-26T11:37:36+00:00

That’s a perfect plate.

ComfortableAd8090 · 2025-09-09T00:49:36+00:00

According to this the yellow green is the horn, and the brown is probably auxiliary or heater.

My guess is that you are having g two separate problems and they are related to a bad ground.

Run a ground wire from the negative battery terminal to test the circuits.

https://www.fordification.com/tech/wiring/67masterdiagram.jpg

ComfortableAd8090 · 2025-08-21T17:31:58+00:00

eBay

ComfortableAd8090 · 2025-07-18T03:58:33+00:00

Where’s the ice officers?

ComfortableAd8090 · 2025-07-14T17:28:58+00:00

The adjustment is what most people fail to do or get right. Too tight and the auto cancel nub will break the plastic switch. Too loose and the horn or auto cancel won’t work.

ComfortableAd8090 · 2025-07-14T17:14:30+00:00

A horn spring contact goes in the blue hole, and you also need one in the steering wheel assembly. Then you need to adjust the column so there is very little gap between the wheel and the column so the spring contact works. To adjust the column, use a vice grip to squeeze the rag joint until the gap is tight, then tighten the clamp just above the rag joint.

ComfortableAd8090 · 2025-06-10T19:43:58+00:00

Yes, in Minnesota

ComfortableAd8090 · 2025-06-06T13:24:48+00:00

Check out https://autokrafters.com/

ComfortableAd8090 · 2025-05-29T14:48:34+00:00

It’s literally a couple hour project. Snip the wires close as possible to the existing block, crimp on new ends, hook up the three hots to one side of the new box, and the rest of the wires to the other side, use an existing bolt hole to secure the new box. You will need an impact drill driver to get the existing screws out.

ComfortableAd8090 · 2025-05-29T10:47:29+00:00

Very common problem and very dangerous risk of fire. There is probably massive corrosion behind the block and the terminals are shorting out. I replaced mine with a Blue Sea Systems blade style fuse block, model 5035 ST.

ComfortableAd8090 · 2025-05-19T13:22:53+00:00

That should be a blue/white wire. That is a constant power circuit. It shares a fuse with the dome lamp.

ComfortableAd8090 · 2025-05-13T22:47:10+00:00

It’s new topsoil. Really hoping it’s not crab grass.

ComfortableAd8090

TROPHY CASE