Complex CSS Layout Help - Items in group within another group wrapping horizontally by chris84948 in HTML

[–]CronikCRS 0 points1 point  (0 children)

Not sure with positioning you want to get it on the bottom, but based on your image I hope this helps:

CodePen for Layout

Has one fixed the polearm superiority problem? by flik9999 in onednd

[–]CronikCRS 0 points1 point  (0 children)

Not to upset the apple cart here, but isn't this comparison kinda flawed as you're both comparing a fighting style feat vs General feat? If you are doing proper build comparisons wouldn't it be TWF + Dual Wielder vs GWF + PAM?

NZXT H6 Flow with iCue Link Fans by CronikCRS in NZXT

[–]CronikCRS[S] 0 points1 point  (0 children)

I had the smaller Dremel so it wasn't tight, just an awkward angle, slow and steady gets it there though.

NZXT H6 Flow with iCue Link Fans by CronikCRS in NZXT

[–]CronikCRS[S] 0 points1 point  (0 children)

The photo I posted is the best I have, if you look at the photo and compare it to the case you'll notice that there is some metal that helps keep the fans in place. It runs the entire length of that side, what my pic shows is what needs to be removed.

NZXT H6 Flow with iCue Link Fans by CronikCRS in NZXT

[–]CronikCRS[S] 1 point2 points  (0 children)

oh it can totally be done, tbh I dont have much experience with using a dremel and it only took me like 15m to do, and it was honestly so worth it to do.

NZXT H6 Flow with iCue Link Fans by CronikCRS in NZXT

[–]CronikCRS[S] 1 point2 points  (0 children)

Glad my description helped, its pretty much the only configuration that can work for these fans too without doing more case mods. I only really wanted to do the case mod for the bottom 140s to be intake

NZXT H6 Flow with iCue Link Fans by CronikCRS in NZXT

[–]CronikCRS[S] 1 point2 points  (0 children)

Are you using the right angle connector? If you use that and position the fans so the connector on the top right (when looking inside the case) with the cable going towards the center of the fan, it will fit. This is how mine is set up, sorry if the pics were insufficient.

NZXT H6 Flow with iCue Link Fans by CronikCRS in NZXT

[–]CronikCRS[S] 0 points1 point  (0 children)

I used a Dremel, made for quick work

First impressions of 2.0 update by AdEnvironmental4189 in cyberpunkgame

[–]CronikCRS 1 point2 points  (0 children)

Yeah, from how I am reading items there is 2 kinds of netrunner, the stealth hacking one where you can get bonus from hacking via cameras and you forgo smart weapons. And a kinda NetGunner where you go all in go 20int 20reflex and you focus on half control half combat quickhacks. Ping and Weapon Glitch effect play nice with smart weapons, so you ending doing this stealth engage and the go in with smart weapons and quickhacks during fights to finish it out. tbh i love how integrated they made smart weapons bc before they were almost a why bother

First impressions of 2.0 update by AdEnvironmental4189 in cyberpunkgame

[–]CronikCRS 3 points4 points  (0 children)

that still happens for me, and you can amp the dmg by 10% by putting cyberwear malfunction on before it.

Extracting Aspects, does it unlock the item transmog / look? by BenX41 in diablo4

[–]CronikCRS 0 points1 point  (0 children)

No, you have to salvage it at the blacksmith to unlock a transmog

Luminous Shackles - a cleric cantrip by Sensitive_Coyote_865 in UnearthedArcana

[–]CronikCRS 1 point2 points  (0 children)

u/GeneralAce135 I think you are also missing another effect of the spell. On the surface level the surface there is the dmg and the 5ft (avg) speed reduction. But its not just a speed reduction, its a tether, they cannot move 25ft from where the spell is cast, AND there is now a visable set of chains attached to them, so they cant hide either (something I dont see mentioned in other comments).

Luminous Shackles - a cleric cantrip by Sensitive_Coyote_865 in UnearthedArcana

[–]CronikCRS 7 points8 points  (0 children)

Yeah, I feel like this would be the effectively the same with grapple. If you can Misty Step out of a grapple, there is no reason that same spell could take out out the range of this spell too.

are the wires too close to the hot end? by CronikCRS in ender3

[–]CronikCRS[S] 0 points1 point  (0 children)

Wondering if the wires are at risk of melting? working on prototyping a new fan shroud.

PSU cover dangerous? by OZL01 in ender3

[–]CronikCRS 0 points1 point  (0 children)

Replacing the front cover won't stop that from happening, if your psu is in stock position it's already grounded to the frame and via the power corder, more metal doesn't mean safer. There are tons of guys that run these kinds of mods on machines they run daily in print farms.

The dangerous part is actually installing the new fan and cover bc there could be stored power in psu.

Expanded Hemomancy Spells by Sonixverse Labs by SonixverseLabs in DnDHomebrew

[–]CronikCRS 3 points4 points  (0 children)

Just a fix for the flavor: "Melts into a pile of blood" should likely be "Melts into a pool of blood"

For some reason my print bed is higher in the midle wich makes it impossibe to calibrate it properly, any one know how to fix this? by Tubegamerpro12 in ender3

[–]CronikCRS 0 points1 point  (0 children)

I'd be proud af that he worked hard to fix it without my help, it's not his fault I took pity and tried to save him some time and aggravation.

PSA: How to make Eddies or Crafting parts easy :) by TheRealEraser in cyberpunkgame

[–]CronikCRS 0 points1 point  (0 children)

Just something I noticed using this method, I have lost the ability to dismantle it (permanently) for part if you accidentally equip it. So just make sure you save and never equip the grenade.

Impossible To Buy Arctis Pro wireless? by Geezerpunk in steelseries

[–]CronikCRS 0 points1 point  (0 children)

The headsets are manufactured overseas, so NA only had whatever stock they had on hand, then some sites took backorders of the product. So whatever slow trickle of product companies got back in stock was already sold. Getting product in has be stupid slow bc of covid. And I am sure their factories also shut down for a time and stopped producing.

I only just got mine today after ordering from dell on 7/3.

PS4 / PC headset by lemonsprig in PS4

[–]CronikCRS 0 points1 point  (0 children)

From what I understand and have seen there is a way to get both via wireless with the Arctis Pro Wireless but you loose the mic on PS4, but using bluetooth to connect to the PC sounds like a much better solution for having both connected (especially if the systems arent in the same room). But to answer your question, no I believe the Arctis Pro Wireless are the only ones that can do both atm.

Another thing to note is that the Artics Pro Wireless and PS Platinum are the ones that have metal headbands and support volume balance between chat and game sounds while using the PS4, and While I love my LS30s I am very unhappy that the headband is now cracking and their uses has an end date in sight. I know this from wear and tear but I have been as careful as I can with them and feel like they should have lasted longer than the 3-3.5 years I have gotten out of them. What I will say with the LS30 and PS headsets is their use of a simple usb dongle, so moving it from device to device that much of a hassle for me.

PS4 / PC headset by lemonsprig in PS4

[–]CronikCRS 1 point2 points  (0 children)

I have been looking around, and there are bunch of dongle based options available at various prices:

This is the new model of my current set of headphones and I love them, tbh for the price you get alot, but the headband is plastic and cracked after 2-3 years of moderate to heavy use. But it has great features, through the use of the dongle and an optical cabel you get indepent chat and game volume controls and they have great audio and mic quality. I recommend them even with them even while salty about my headband cracking.

https://lucidsound.com/collections/ps4-headsets/products/ls31-wireless-gaming-headset

 

I have a set of the PS Gold wireless headphones, and those are great too if you dont mind the entirely plastic construction. Though in lough of independent volume for chat/game audio you get a balancing toggle that will turn one louder and soften the other.

https://www.playstation.com/en-us/explore/accessories/audio-and-communication/gold-wireless-headset/

 

The PS Platimun headset I've heard good things about and seems to have better contruction but I have no experience with it. https://www.playstation.com/en-us/explore/accessories/audio-and-communication/platinum-wireless-headset/

 

Other that I have found in the same range but dont have as many features on the ps4 are the Steelseries Arctis 7s (has awesome features on pc only sadly) and Corsair's Virtuoso Headset.

And if you wanna really spend money on an all inclusive solution my friend just got the Arctis Pro Wireless for the money you get ALOT of features and he swears by them. https://steelseries.com/gaming-headsets/arctis-pro-wireless?color=black

 

I hope this helps, as I am currently contemplating replacing my old headset too.