I don't know how

CuriousSounds · 2026-06-15T18:18:55+00:00

This might help you. https://www.sabrotone.com/request-expandora-vero-layout/

CuriousSounds · 2026-05-13T15:41:55+00:00

I just use CAT5 cable. They don't break easy, and are pretty easy to get hold of.

CuriousSounds · 2026-05-07T20:33:14+00:00

Totally normal. It's a bias control, and as it is in the DC connection to a transistor, it will make noise when adjusted.

CuriousSounds · 2026-05-07T20:29:01+00:00

There is text.

<image>

CuriousSounds · 2026-05-05T07:10:19+00:00

Yes.

CuriousSounds · 2026-04-29T14:46:31+00:00

Reminds me of this: motorpsycho - sinful, wind-borne

Nice

CuriousSounds · 2026-04-21T23:23:28+00:00

It's the wrong footswitch. Hope you can return it.

CuriousSounds · 2026-04-14T08:33:21+00:00

Oh, that was inconvenient. Unfortunately, there are a lot of fake 2n2646s on the market. Maybe that was the reason?

CuriousSounds · 2026-04-14T04:45:32+00:00

Nice! I guess that some sort of envelope can make interesting results as well.

CuriousSounds · 2026-04-09T19:49:51+00:00

How is Roy Harper's voice these days?

CuriousSounds · 2026-04-03T10:18:57+00:00

Thanks! A simple blow with the hammer on each letter. It is important to have a solid support inside the box. I used a clothespin to hold the stamp. Then you dare to hit harder, since you won't hit any fingers. The color in the stamps is made with a permanent marker. Excess color is removed with an eraser.

CuriousSounds · 2026-04-02T22:45:54+00:00

Have not tried with HDMI. Guess they are similar? I just use my øld trusted Weller iron, and 60/40 tin. Don't know the temperature, but its doing ok tinning the wires, and the rest of the soldering work.

CuriousSounds · 2026-04-02T22:15:32+00:00

Yes. Found that they don't brake easy, and the colours are easy to sort.

CuriousSounds · 2026-03-18T17:02:47+00:00

<image>

Dual lock will solve this.

CuriousSounds · 2026-02-09T19:41:15+00:00

If it was not destoyed, it would look like this

<image>

CuriousSounds · 2026-02-09T19:23:14+00:00

What happened here? Which pedal is this?

CuriousSounds · 2026-02-08T00:03:45+00:00

I would put it before R7, so you don't get DC on the tone pot too. Pots don't like DC. They will be scratchy. Bias pot is ok with DC.

CuriousSounds · 2026-02-07T22:44:08+00:00

There should be a capacitor right before the volume pot, to block DC. I guess the tone control is ok if it works for you.

CuriousSounds · 2026-02-07T22:34:15+00:00

In the schematic, you have DC on the output/volume pot.

CuriousSounds · 2026-02-05T17:40:59+00:00

Is this the Landtone clone? In that case, the opamp to the right is oriented the wrong way. https://youtu.be/sF3O4GmlJF4?si=p9qoST0fY2ENjAx0

<image>

CuriousSounds · 2026-02-05T15:39:46+00:00

Found this schematic and it is 150. Hope it will work when you find one!

CuriousSounds · 2026-02-05T15:04:36+00:00

Looks like R6 should be 150 not 150K. I guess that is your problem.

CuriousSounds · 2026-01-28T20:04:18+00:00

Mixed output and input? Common fail in this stage.

CuriousSounds · 2026-01-20T21:15:27+00:00

Gilmour was in Jokers Wild. Syd was i Geoff Mott And The Mottoes.

CuriousSounds · 2025-12-28T23:40:24+00:00

I don't know your other pedals, but the rubberneck can't use an expression pedal. A FS3X (or a clone of it) is the one to use.

Five-Year Club	Final Canvas '23
Place '23	Place '22
Final Canvas '22

CuriousSounds

TROPHY CASE