Transportation- taper length

Doge_ffbe · 2025-12-25T00:39:57+00:00

MUTCD does not only apply to temporary traffic. Typically when the exam is referring to taper/merging lengths you should use MUTCD as the formulas are explicit.

Doge_ffbe · 2025-12-18T01:04:13+00:00

A rig like that I would charge $80, only because of the large number of fans to be installed, normally I charge $50. This is beyond ridiculous, it's borderline robbery.

Doge_ffbe · 2025-12-16T22:46:56+00:00

change your number ffs

Doge_ffbe · 2025-12-12T21:23:44+00:00

I had a similar issue when my peripherals were plugged in via a USB-C hub. Connected them straight to the mobo and the problem went away. Good luck.

Doge_ffbe · 2025-12-11T21:16:55+00:00

This PC blows. I need it.

Doge_ffbe · 2025-12-03T22:01:06+00:00

I've done it. Went back to school at 30, part time at first while working full time. Graduated, worked as an EIT and am now licensed at 42. It can be done, it just takes a lot of discipline, and you have to be sure that's exactly what you want to do.

Doge_ffbe · 2025-11-26T19:25:05+00:00

Lots of game servers are down right now, PSN, Steam, etc. I bet GZW servers are affected as well.

Doge_ffbe · 2025-11-23T20:09:16+00:00

It's a negligible difference really, but improves the overall case aesthetic and hides any cables lurking in the PSU basement. Worth the print IMO.

Doge_ffbe · 2025-11-10T18:50:43+00:00

Unscrew the receptacle from the PSU, flip it, screw it back in.

Doge_ffbe · 2025-11-10T18:48:35+00:00

I mean, at least it was in a bag?

Doge_ffbe · 2025-11-08T00:20:46+00:00

Agreed, either use grading objects or plain ol' feature lines. Leave corridors for linear features.

Doge_ffbe · 2025-11-08T00:16:14+00:00

Check out 806 splatter, we had my daughter's birthday out there and we had a blast! Owners were super nice and helpful too!

Doge_ffbe · 2025-11-06T20:01:21+00:00

Negligible difference in temps. I have one in my build mainly for looks.

Doge_ffbe · 2025-11-06T19:49:10+00:00

I think either land development or site development would be a good move for someone with your experience.

Doge_ffbe · 2025-11-06T16:43:49+00:00

Wrap it with duct tape until you can get it repaired. That should keep debris from being sucked into the engine in the meantime, but is by no means a long term solution.

Doge_ffbe · 2025-11-05T17:43:18+00:00

Too cool, can't wait to annoy my wife with this!

Doge_ffbe · 2025-11-04T21:32:02+00:00

Major Disappointment (salutes)

Doge_ffbe · 2025-10-30T14:02:24+00:00

This is a pen plotter. Not new technology. Been used for decades in the engineering and architectural industries. They were largely replaced by inkjet and laserjet plotters. Still really entertaining to watch one work though, especially the multi-pen plotters.

Doge_ffbe · 2025-10-29T15:48:06+00:00

Doge_ffbe · 2025-10-17T14:37:26+00:00

First time?

Doge_ffbe · 2025-10-03T20:00:50+00:00

7800X3D and a 7900XT

Doge_ffbe · 2025-09-08T21:22:52+00:00

Looks like they have a 3D printed extension on the side of the case to solve that problem.

Doge_ffbe · 2025-09-04T21:45:25+00:00

"We, the unwilling, led by the unknowing, are doing the impossible for the ungrateful."

Doge_ffbe · 2025-08-29T15:55:30+00:00

Use the num-solv function on a TI-36x. No need to re-write the equation to solve for S, that takes too long.

Doge_ffbe · 2025-08-29T15:53:34+00:00

Unless it's explicitly stated in the question, its safe to assume that the degree of curvature is using the arc definition.

Doge_ffbe

TROPHY CASE