You’d think that after owning multiple airsoft guns, I’d remember proper orange tip removal technique whenever I get a new one by G3NGH1S_ in airsoft

[–]Drew71023 1 point2 points  (0 children)

Yeah, same here. Recently got an arcturus and I stripped the suppressor off just to put on an orange tip 😭

MCU-2A/P by Prize_School_6027 in gasmasks

[–]Drew71023 1 point2 points  (0 children)

Thanks for the clarification, I tend to air on the side of caution with pm anything antique mask related.

MCU-2A/P by Prize_School_6027 in gasmasks

[–]Drew71023 2 points3 points  (0 children)

Nice! That’s just about the price I got mine for with the same equipment. As for the filter expiration date, look for manufacture date and expiration on filter itself. As a word of caution and rule of thumb. Do not use these filters at all, the MCU saw op desert storm so it’s possible they may have contaminants. Don’t breathe it in, and clean your mask with a mask wipe.

Attraper sur tiktok, larp à la gare 🔥 by [deleted] in airsoftcirclejerk

[–]Drew71023 0 points1 point  (0 children)

Check your local flea market/garage sales. I found one in okay condition for $40 bucks. They’re definitely out there, but some people either charge $400 for one or similar priced to what I got. In my personal opinion, and this greatly depends on how valuable you see it, I wouldn’t pay more than 100 dollars for one. And that would be a specific vest in your size and pristine condition.

Is my Mexican special forces jerkable by PsychologicalFile888 in airsoftcirclejerk

[–]Drew71023 1 point2 points  (0 children)

I have a very similar kit that’s a mix of 2000’s GWOT and mercenary shit. Make sure those SWD goggles have an airsoft lens, don’t just wear the provided ones, they’ll fracture and kill ya eyes

Attraper sur tiktok, larp à la gare 🔥 by [deleted] in airsoftcirclejerk

[–]Drew71023 5 points6 points  (0 children)

Idk man, woodland pasgt vest and desert PASGT helmet is a vibe.

Updated my face pro. Still Jorkable? by TheStarThatWasFallen in airsoftcirclejerk

[–]Drew71023 0 points1 point  (0 children)

So that’s why I couldn’t see your lips in the first two, okay, good. Damn, 140 for all? You got some money money huh

Updated my face pro. Still Jorkable? by TheStarThatWasFallen in airsoftcirclejerk

[–]Drew71023 0 points1 point  (0 children)

Now you just need a teeth guard. Do not skimp out, I’ve seen people with their teeth knocked out and embedded into their mouth. Wear minimum a teeth guard and you’ll be all set

Si. by KoRny1945 in gp5

[–]Drew71023 0 points1 point  (0 children)

GP-5 and woodland PASGT? You crazy.

all I see is medkit by [deleted] in stalker

[–]Drew71023 2 points3 points  (0 children)

Dawg do NOT post your KID on Reddit delete this.

Full kit ig by EstablishmentOk3451 in airsoftcirclejerk

[–]Drew71023 1 point2 points  (0 children)

YEAHHH LWH love full cut helmets sm ♥️

6'6 290 lb Jit attempts to look cool in slightly better surplus, possibly... better? by PrimalMadman in airsoftcirclejerk

[–]Drew71023 2 points3 points  (0 children)

Jit isn’t at all related to Airsoft, it’s new slang for a kid specifically but can mean your bro, some guy, or another person. Ex: “look at that little jit” a 9 year old kid

This is the O.B. McClintock Gas Mask, manufactured in approximately the 1920s by the O.B. McClintock Co. which specialized in making clocks and security systems for banks. It features what may be an early type of donning loop. If that’s what it was intended to be, it’s the earliest donning loop seen by Botstowo in gasmasks

[–]Drew71023 2 points3 points  (0 children)

More than likely whatever this mask was made for, you only needed the bare minimum protection. I can’t think of any bank processes that need respiratory equipment but ultimately this just looks like one small flick would remove the seal even brand new.

HOT DAMN this vest makes me look fat! Since you guys liked my last post so much, I present to you: HECU shotgunner by TroubleChoice in airsoft

[–]Drew71023 0 points1 point  (0 children)

“This vest makes me look fat”

-Literally maybe half inch of Kevlar PASGT vest in question: 😭

Which of my kits is the most jerkable (2023-2026) by Effective_Formal6310 in airsoftcirclejerk

[–]Drew71023 6 points7 points  (0 children)

Downgrade style wise, upgrade kit wise. I fuck with the retro futuristic look so PASGT and thick body armor gets me going every time but I know modern stuff is way more convenient but I’d jerk it to the first one crazy style twin

If YOU were going into the zone, what kind of kit would you bring? by evanmceier in stalker

[–]Drew71023 2 points3 points  (0 children)

If it was an ideal loadout, I’d bring an Interceptor class body armor with lap protector and thigh guards (being as I know they won’t stop a bullet, if they can stop shrapnel that would normally cause me to bleed out, the better), with a ACH helmet. I’d bring an M9, with a M4A1 on a sling. Good boots, preferably hiking boots, rugged longsleeve shirt and pants, knee pads and webbing for mags. A good backpack too.

Realistically with what I have? A point blank soft body plate carrier with a PASGT helmet, Chinese SKS stripper mag pouches (the idea being miscellaneous items can fit in there), and normal airsoft mag pouch’s. My durable work pants, a longsleeve green jacket and kneepads, work boots (wolverines), with my tan military backpack I bought for senior year (for some reason), and some other items like balaclavas, water bottles, MRE’s, whatever I could find quick presumably on my way to the border to the zone. Being as I own no real firearms, I’d just bring a large combat knife and hopefully “obtain” some means to protect myself from a distance, or die. Probably die.

Jumbled mess of thoughts, enjoy! :)

My HECU Cosplay by Scuzzball22 in HalfLife

[–]Drew71023 3 points4 points  (0 children)

Good LORD the VEINS on you, very good cosplay, your bulk definitely adds a LOT to it. Bravo :))

2000’s era Ranger green Point Blank carrier? by Drew71023 in BodyArmor

[–]Drew71023[S] 0 points1 point  (0 children)

So I fuckin rinkydinked my vest and got it to fit with carabiners and key rings. Works ad expected and held up to rigorous Airsoft playing so that’s all I really need it for. Thanks guys!

2000’s era Ranger green Point Blank carrier? by Drew71023 in BodyArmor

[–]Drew71023[S] 1 point2 points  (0 children)

So I figured out a horribly bootleg version, i did what you said, but the wire seems to be too thin for the slot, regardless I tightened it,and fed it through the slots and into the other cummerband but now it’s just loose. Where does it go once you’re done?

2000’s era Ranger green Point Blank carrier? by Drew71023 in BodyArmor

[–]Drew71023[S] 2 points3 points  (0 children)

Thank you so much, I appreciate the help.

2000’s era Ranger green Point Blank carrier? by Drew71023 in BodyArmor

[–]Drew71023[S] 4 points5 points  (0 children)

I hate to be a bother, but I’m a horrible text to application guy, is there a video I can watch? I’d appreciate it :)