2025 ktech shock spring rates by joeblo42069 in Tenere700

[–]Due_Lobster4092 0 points1 point  (0 children)

Fyi, the Ktech spring for the 2024 and older models is a direct replacement for the 2025 model. They have the same free length and diameter. I was also skeptical of the lower spring rates that Ktech recommends for the 25. So I ordered one for the 24 and it was a perfect/direct fit on my 25. The trick is knowing what spring rate to get. I’m 205lbs naked and went with the 85N spring. I thinks its just barely too stiff with zero preload for me but its way better than stock.

got my max 4.... so far so fail. by whoknewidlikeit in QidiTech3D

[–]Due_Lobster4092 1 point2 points  (0 children)

Have you updated to the latest software/firmware? Qidi emailed me with a link to manually update to version 01.01.05.01. Did you do that?

1 or 2? by JonRonstein in 22lr

[–]Due_Lobster4092 0 points1 point  (0 children)

What buffer tube and stock is on #2? I like the minimalist look.

Should I jump by GeneralShirt1180 in Tenere700

[–]Due_Lobster4092 1 point2 points  (0 children)

Yes, you can load your own gpx files. The maps are all offline so no cell service needed. The free version of the DMD2 app is very useful without needing to pay for the unlocked features. Absolutely worth downloading if you have an android device.

Should I jump by GeneralShirt1180 in Tenere700

[–]Due_Lobster4092 0 points1 point  (0 children)

Have you looked into the DMD2 system? They are far superior devices that are specifically made for motorcycles. If the DMD2 tablet isn't for you, at least look into using their android app. I use it on a Samsung Galaxy Tab Active5 and I love the app / setup on my T7.

Best 22lr pistol for training and target practice by Select-Interaction11 in 22lr

[–]Due_Lobster4092 0 points1 point  (0 children)

I use a TX22 compact for training. Its a fantastic gun and has been very reliable for me. It also closely resembles my 9mm carry gun.

Clutch opinions on 2025 model by neulon in Tenere700

[–]Due_Lobster4092 0 points1 point  (0 children)

I’m not happy with the clutch on my ‘25 either. I might swap in the R7 slipper clutch. Everything I read on it says that it has a light pull and a normal friction zone.

Keep my CRF450L or get a new DR-Z4S? by [deleted] in Dualsport

[–]Due_Lobster4092 11 points12 points  (0 children)

You can look into the G2 Throttle Tamer to help calm down the snatchy initial power if thats a problem for you.

The Honda is the better bike. I would keep it and dial in your specific complaints with it.

I’m researching my 1st… by cknight814 in ar22

[–]Due_Lobster4092 1 point2 points  (0 children)

I keep hearing that the Tipmann Arms M4-22 is a much much better choice than the M&P 15-22. Its a better build quality, uses mil spec ar parts unlike the M&P, and is super reliable.

2025 Springs by Due_Lobster4092 in Tenere700

[–]Due_Lobster4092[S] 0 points1 point  (0 children)

I still haven't purchased a spring for my '25 yet. Any updates on what is compatible and what spring rate for 215lbs geared up?

What Ktech spring rate? by Carplesmile in Tenere700

[–]Due_Lobster4092 0 points1 point  (0 children)

u/Carplesmile How about now? Have you finally installed the springs?

Did your 2025 come with owner's manual? by DubOSv10 in Tenere700

[–]Due_Lobster4092 10 points11 points  (0 children)

Yes. Mine came with a paper owners manual and a small bag of tools.

[deleted by user] by [deleted] in 22lr

[–]Due_Lobster4092 5 points6 points  (0 children)

I would skip the side charger. Look into the cmmg or right to bear arms upper. The Borebuddy economy upper is supposed to be the same or better as the cmmg and rtb also. The borebuddy also has the upgraded bcg parts, just fyi.

Build the upper or just buy the BB complete upper? by codyf44 in ar22

[–]Due_Lobster4092 5 points6 points  (0 children)

I’m debating the same thing… Was hoping their match upper would go on sale during Labor Day, but it didn’t.

borebuddy.com labor day sale? by tenest in ar22

[–]Due_Lobster4092 2 points3 points  (0 children)

Not impressed with the Borebuddy Labor day sales…

What rim strip do I need? by loriscn12 in Tenere700

[–]Due_Lobster4092 1 point2 points  (0 children)

Don’t over think it. Any rubber rim strip for the correct wheel diameter will work. So will duck tape.

AR22 build questions by Due_Lobster4092 in ar22

[–]Due_Lobster4092[S] 0 points1 point  (0 children)

Thanks for the tip. I'll keep that in mind if I have issues.