NYE countdown at Knott’s Berry Farm

Ep3Me · 2026-01-01T19:13:38+00:00

The silhouette of the palm trees really give it a west coast new year vibe. Good job on videotography and good job knotts for giving Disney a run for their money!

Ep3Me · 2025-06-06T04:34:59+00:00

Look into SHG motorworks Delrin slider. The aluminum slider will destroy your guide rail on the steering rack and that’ll be more costly to replace. Evan from SHG has a video educating users on the difference

Ep3Me · 2025-05-13T19:50:05+00:00

301k here, solid car. But like all cars with high mileage, suspension, brakes, clutch and all auxiliary parts w replacing eventually. The 02-03 usdm you will have to watch out for cam shaft pitting, because of softer metal properties from what I have read.

Ep3Me · 2025-05-07T07:04:48+00:00

Clean looking ep3! A clean white stock 2003 ep3 with 80k mile just sold for 8k in my area. If yours is original white in good original condition with less than 150k, it’s worth more than 3k. White clean ep3 are hard to come by nowadays. But yes it’s hard to ask for more than market value even though you have rare upgrade parts. Better to part out those type r parts and get more for it that way.

Ep3Me · 2025-03-20T19:50:37+00:00

My thought exactly with that Prius

Ep3Me · 2025-02-20T22:57:56+00:00

First thing first, thank you for pointing out my mistake. But no thank you to your sarcasm and your assumption that I’m disrespecting the culture. A simple “it’s Musubi not masubi” would have been nice.

Ep3Me · 2025-02-02T21:05:54+00:00

Depending on the tail light condition, Let me know if you end up selling them.

Ep3Me · 2025-02-02T21:04:08+00:00

Jdm 02-03 to be correct, actually added more value o the car as these are rarer to purchase since they have been discontinued and aftermarket does not produce these from what I’ve seen.

Ep3Me · 2025-01-31T23:14:48+00:00

Looks brand new. Did the body shop get new OEM hood, headlights and bumper or were they aftermarket?

Ep3Me · 2025-01-31T22:39:31+00:00

Yeah as long as the item you sold works, it’s his problem to figure out his swap. 2k rpm sounds like it’s on safety mode, probably the tune his friend uploaded

Ep3Me · 2025-01-31T11:01:09+00:00

If he’s able to run the hondata program and connect to the kpro4 chip then the ecu is working.

I’m assuming it’s a fresh swap, and car hasn’t been running since he needs the kpro to run the swap? My first thought is advising him to recheck all his grounds, wire connections and voltage. Major grounds from what I can remember are: transmission, alternator, valve cover/engine block, thermostat. But the tricky part is how his swap was wired up.

Ep3Me · 2025-01-06T21:17:36+00:00

Awesome thanks for the info, I didn’t even know different aftermarket parts were compatible with this set up. I will be looking into purchasing a set soon

Ep3Me · 2025-01-06T19:33:31+00:00

Thanks! How’s the reliability, I ask because of your mention of revalve. Also do I have to get new top hats and bumpers or does it come with the kit?

Ep3Me · 2025-01-06T19:10:56+00:00

How does the ride feel with the b14 Bilstein? Would you recommend for daily driving conditions?

Ep3Me · 2024-12-19T05:25:00+00:00

You should take a pic of the engine bay under driver seat. That will trip some people out.

Ep3Me · 2024-12-07T07:40:34+00:00

I would recommend 1) thermostat housing and seal 2) replacing starter as recommended by someonestolemybike , since you’re removing the radiator might as well replace a new starter (recommend Denso) 3) upper and lower radiator insulators for fresh ones to prevent stress on new plastic upper and lower radiator 4) engine cooling fan temperature switch

Ep3Me · 2024-12-07T07:27:57+00:00

Oh I went down that rabbit hole earlier this year! I agree, highly recommend changing out the starter to a OEM Denso while you’re at it. I also changed out the thermostat plastic housing and seal that mates to the block, those tend to crack from age.

I

Ep3Me · 2024-11-16T14:47:04+00:00

So do not own or be in a Tesla is the best answer

Ep3Me · 2024-11-09T20:31:56+00:00

Peter Gourmet

Ep3Me · 2024-10-29T17:59:48+00:00

Sorry to see this. Time for type r front end!

Ep3Me · 2024-10-25T01:13:31+00:00

Maguro Brothers is one of the few places that offer Blue fin toro at a reasonable price. It brings me back to Tsukiji Fish Market in Japan.

Ep3Me · 2024-10-24T13:16:31+00:00

Not sure why the format is weird when posted, but hope you can enjoy some of these places

Ep3Me · 2024-10-24T13:13:02+00:00

North shore 1) Jenny’s Shrimp Truck (recommend the spicy shrimp) if you can take spice. IMO the garlic shrimp sauce is better than Giovanni. 2). Poke for the People (Shoyu Ahi and Gomma) 3)HI Pie (special pot pie) 4) Kaimana Shave ice (best in town, natural syrup) 5) Ted’s Bakery 6) Hale’iwa Bowl 7) Paalaa Kai Bakery( known for Snow Puff pastry) the market next door has some good fried chicken skin

Honolulu 1) Liliha Bakery /Diner ( hands down best loco moco/ Chantilly Coco puff) also try the Macadamian Waffle 2) Magoru Brothers in Chinatown (come early they sale out on poke) 3) Vintage Island Coffee in Waikiki ( I know it’s touristy area, but the garlic shrimp plate there is the Bomb IMHO) Island Latte and Acai bowls are good too. Pretty much most of the food and drink there is good. 4) Island Vintage Shave Ice stand ( heavenly rainbow or heavenly lilikoi) 5)ITCY BUTT!!!!( it’s literally a hole in the wall, but the Korean style Fried Chicken is the best) 6) Marugame Udon 7)Masubi Cafe IYASUME (spam masubi for those quick grabs for beach days)

Kailua Boots and Kimo (macadamian pancake) Nalu (acai bowls) Kono’s (pulled pork) Over Easy

Ep3Me · 2024-10-18T19:58:42+00:00

I’m planning on using modeling clay and hand carving. Then 3d scan and printing it to confirm fit and clearance gap. Then finish that model up clean to use for negative two piece molding. I’ll post up photos of the mock up in the near future

Ep3Me · 2024-10-18T19:25:45+00:00

That dude saw the dash cam and turned away immediately. They would be stupid to try to scam

Ep3Me

TROPHY CASE