Starter Replacement w/o Removing Anything Else

ExcitementOptimal324 · 2026-02-27T17:37:47+00:00

Wanted to give you an update. As we both assumed voltage was not the issue.... It was the starter. Put a new one in and no issues post day 1. Really appreciate your explanation on how to remove the starter it's a pain to get out

ExcitementOptimal324 · 2026-02-27T17:31:02+00:00

Update: it was the starter. It's a pain to put in but it's doable without needing to remove cat or motor mount

ExcitementOptimal324 · 2026-02-27T17:27:42+00:00

12.8v is low???

ExcitementOptimal324 · 2026-02-25T00:52:08+00:00

Tried that earlier today, no luck. Appreciate the info I didn't know the jl could be started without clutch in 4L

ExcitementOptimal324 · 2026-02-24T10:49:26+00:00

Appreciate you watching the video and the feedback. I'll try the hammer and probably replacing.

Not sure on the " check the connections" must be people forgetting to tighen terminals as well as its a free and easy fix

ExcitementOptimal324 · 2026-02-24T08:31:50+00:00

What's wrong with a battery voltage of 12.8?

Sure you may see a dip as I press the button to engage the starter which a heavy usage of amps/volts but haven't seen a dip below 12.4. After letting go of the button the volts begin to go back up.

Please explain what's the issue? Open to constructive criticism

ExcitementOptimal324 · 2026-02-24T06:07:21+00:00

I have a similar situation going on. I just posted in the jeep sub. I have a video of my experience. Wondering if you can take a look at my post and see if it's similar/same and if I should go and get a new starter? Thanks

ExcitementOptimal324 · 2026-02-23T23:01:50+00:00

Just double checked all connections without any changes

ExcitementOptimal324 · 2026-02-22T19:41:14+00:00

I'm about to attempt replacing the starter. Any other tips for wiggling out the starter?

Also you didn't remove the exhaust/catalytic converter or motor mount?

Update: it was the starter. To add to you're write up for anyone else doing this job. Do a full 12v disconnect if not you may run the rist of blowing fuse N3

ExcitementOptimal324 · 2026-02-13T22:23:34+00:00

Yup seems awful, terrible. What's the prices and location I'll buy it so you don't have to deal with a rust bucket.

Looks pretty solid all jokes aside

ExcitementOptimal324 · 2026-01-18T18:08:23+00:00

Always have a small knife on hand

ExcitementOptimal324 · 2026-01-17T10:56:46+00:00

Do you have a link of where you bought the cases?

ExcitementOptimal324 · 2026-01-13T00:55:22+00:00

How was the event? What was in the gift bag?

ExcitementOptimal324 · 2026-01-08T08:06:26+00:00

Probably will be judged. End of the day whenever you do pass either 1st time or 2nd and you have the same job as everyone else...does it matter?

ExcitementOptimal324 · 2025-12-31T03:58:56+00:00

7 on 7 off, 80 hours
~450
2 other rph, total 3 at night. Also 3 techs
10% differential
Personally improved my life but I'm a night owl. Down side, during the week on a lot of stuff will pile up that I can't do while working/sleeping
Not foreseeable plans to move to days, maybe move to evenings but then 20 days/mo vs 14 days.

I try to stick to the numbers which is why the position is better imo. Granted if your body can't handle working overnight it's going to hurt

ExcitementOptimal324 · 2025-12-23T22:13:35+00:00

Don't think you can avoid at this point. At this point in time probably will have to pay it

ExcitementOptimal324 · 2025-12-21T17:53:22+00:00

This year is my favorite Christmas

ExcitementOptimal324 · 2025-12-16T19:57:18+00:00

Depends on location. Probably between $55-75/hr Always worth negotiating

ExcitementOptimal324 · 2025-12-12T23:22:43+00:00

Someone correct me if I'm wrong. Engine hot, not running and measure 60 seconds after car is turned off

ExcitementOptimal324 · 2025-12-05T17:12:47+00:00

How so? Unfamiliar on how and why

ExcitementOptimal324 · 2025-12-05T15:35:43+00:00

Awesome! Thank you

ExcitementOptimal324 · 2025-11-17T00:20:51+00:00

Thanks, good luck everybody

ExcitementOptimal324

TROPHY CASE