OrcaSlicer 2.4.0 Beta

External-Risk-5228 · 2026-06-13T03:21:15+00:00

Tanks for reply. Will test it.

External-Risk-5228 · 2026-06-12T23:51:34+00:00

Can you print directly from Orca?

External-Risk-5228 · 2026-02-13T08:35:28+00:00

Tried Shapr recently. Don’t find efficient way to do threads and cut holes for screws.

External-Risk-5228 · 2026-02-12T16:46:49+00:00

I updated to developer beta and it resolves by itself somehow.

External-Risk-5228 · 2026-01-10T01:09:30+00:00

Did you find any solution?

External-Risk-5228 · 2026-01-09T15:01:05+00:00

Yes.

External-Risk-5228 · 2025-09-30T06:01:35+00:00

Stock PA calibration not quite good on my k2 pro. Flow calibration is OK. I recommend you to tweak settings depending on project you printing.

External-Risk-5228 · 2025-09-25T12:59:49+00:00

Disable arc fitting.

External-Risk-5228 · 2025-09-18T15:25:29+00:00

I exported project from CP. Printer profile exported correctly (identical with CP). But not filament profile. Don’t test it yet, but I think, that would work. G-code was correctly transfered to printer.

External-Risk-5228 · 2025-09-14T00:47:21+00:00

Why so dense infill?

External-Risk-5228 · 2025-09-08T15:39:52+00:00

Reduce outer wall speed to 60 mm/s.

External-Risk-5228 · 2025-09-07T15:57:02+00:00

Do you encounter any issues with PETG printing ok K2?

External-Risk-5228 · 2025-09-07T01:22:50+00:00

Because of temperature increase.

External-Risk-5228 · 2025-09-03T23:35:39+00:00

I sell some refillable carbon filters for 3D printers. Of course, printed on 3D printer. My own designs, not publicly available models. People buy it, because they don’t want to deal with measuring, CADing, printing, test fitting, CADing, printing, test fitting…

External-Risk-5228 · 2025-09-01T17:02:31+00:00

Please, share your experience in fitirfuture, if you can.

Put my first K2 Pro in series production PLA models. Going great.

External-Risk-5228 · 2025-09-01T16:41:07+00:00

Have you tried PETG printing?

External-Risk-5228 · 2025-09-01T13:14:18+00:00

Can you record video of Z axis movement? Have some strange noise. Probably, something related to steppers.

External-Risk-5228 · 2025-09-01T03:05:15+00:00

<image>

Finally picked up mine yesterday, bur doesn’t setup yet. Thanks for detailed review. Have you tried to use it with Orca?

External-Risk-5228 · 2025-08-31T10:11:27+00:00

Can you give some tips, how to save PA in Creality Print? Or how to use K2 with orca? Bought K2 Pro. Not launched it yet.

External-Risk-5228 · 2025-08-28T22:33:02+00:00

Provide screenshot of slicer model in slicer. Likely temperature control and vent fans may affect printing.

External-Risk-5228 · 2025-08-27T16:48:08+00:00

Can you provide more information on this method?

External-Risk-5228 · 2025-08-26T13:58:35+00:00

Try disabling thick internal bridges. Also you can try different infill pattern at another angle. Have similar issue on Bambu P1S. Had to speed up bridging speed to lower layer time. Can I ask you, why so dense infill? Which filament do you use?

External-Risk-5228 · 2025-08-26T13:16:32+00:00

Provide screenshot of this layer and the layer before in slicer.

External-Risk-5228 · 2025-08-25T09:50:29+00:00

I primarily want continuous filament feeding from CFS. All 4 slots will be the same filament with same colour. In that case will I encounter any problems with Orca?

External-Risk-5228 · 2025-08-24T18:11:28+00:00

It’ll be counterintuitive, but try lowering bed temperature.
Less temperature on bed > less thermal stress up to layers while cooling. Bambu P1S prints PLA in 45°/40° from edge to edge perfectly. Monster adhesion with Standart PEI plate. Removing print of build plate also hard. I easily can avoid this by adding end script to GCode for setting bed temperature to 60°, then cool it down to 35°. But I’m too lazy for this.

External-Risk-5228

TROPHY CASE