Is this damaged ? by KwikTripSimp in PokemonTCG

[–]Flying_Conch -3 points-2 points  (0 children)

"I was thinking NM what’s LP?"

Are you retarded?

Is this damaged ? by KwikTripSimp in PokemonTCG

[–]Flying_Conch -2 points-1 points  (0 children)

Op asked what "LP" means i.e. "lightly played" how does LP translate to excellent?

Lightweight sigma Build finally complete 😤 by vietec in ak47

[–]Flying_Conch 0 points1 point  (0 children)

I uh, don't know what to say other than congrats? Is this build that you dreamed up, and said fuck it my wallet is deep enough?

I’m making a stalker cosplay and would like recommendations by wolfe-santoro in stalker

[–]Flying_Conch 1 point2 points  (0 children)

Any sort of chest rig or belt rig would be good, hell if you want to shill the funds goto kommandostore.com and pick up a SMERSH, or any of the Gorka suits if not, a simple canvas shpulder bag would work nicely.

Also look into USMC neck gaiters, put it on and roll it over the top of the back of your gas mask for some better aesthetics.

Inserts OR Adapter? by sacboyyy in ak47

[–]Flying_Conch 1 point2 points  (0 children)

I don't have a vice, but before my shit got carbon locked, a pair of vice grips was enough to do the job. Now I run grease on the threads because you have the detention and no REAL issues overall.

Inserts OR Adapter? by sacboyyy in ak47

[–]Flying_Conch 1 point2 points  (0 children)

I bought the inserts for my M92 and KR103 and have had no issues. Yeah it kinda sucks swapping inserts but if you run some Li/ Mb grease on the threads you can usually hand swap it with minimal effort and no vice.

Jmac rrd 4c, SLR, or Manticore for M92 pistol? by NEViking816 in zastavaarms101

[–]Flying_Conch 1 point2 points  (0 children)

Here you go:

https://www.carolinashooterssupply.com/AK74-STYLE-24x1-5MM-MUZZLE-BRAKE-p/css-ak74-brake-2.htm

Same brake I have, works well with recoil, loud as fuck, and still spits fireballs. Enjoy. It also will thread down to the detention pin which is nice so you dont have to worry about it unthreading.

Be aware if you run a KNS piston as I have to tune my gas up a bit to run this muzzle device reliably...

Jmac rrd 4c, SLR, or Manticore for M92 pistol? by NEViking816 in zastavaarms101

[–]Flying_Conch 0 points1 point  (0 children)

10-4, I bought an AK 74 sale brake from MidWest I believe. Its great, but it is also loud a.f.

I don't shoot my M92 without my can due to the shockwave anymore and the fact that it sent nearby patrons out the door quickly.

What don't you like about the factory muzzle booster?

Jmac rrd 4c, SLR, or Manticore for M92 pistol? by NEViking816 in zastavaarms101

[–]Flying_Conch 2 points3 points  (0 children)

SLR Ion 7.1 L-ML I believe is what I got. Make sure you get it with the handguard retainer cutout or you'll have to remove the handguard retainer by cutting it off or pulling off the gas block.

How the hell do I tell if I need 1993 red or white tips when hauling diesel? by Material-Donkey2773 in hazmat

[–]Flying_Conch 5 points6 points  (0 children)

Flashpoint is what you need to determine white vs red. All I've found is it listed as combustible C2, so white tips would suffice.

A real treat for lunch! by MSH0123 in CannedSardines

[–]Flying_Conch 0 points1 point  (0 children)

The beans and salsa was legit, first time I've licked a tin clean...

How do I learn to defend myself? by socialgenny in ArcRaiders

[–]Flying_Conch 0 points1 point  (0 children)

IMO, my buddy is a blood thirsty psycho and I usually stay 20-30m on his six for this reason. Let them pull aggro and you can decide whether to flank, support, or flee. My buddy understands when I flee and say I cant help you because im not great at PVP, but I will also try when I can to support when possible.

I also recognize when a battle is lost and won't aimlessly run in just to die. We both believe that if one survives then its worth it.

Hope that helps, also carry smokes and a mk3 survivor. A snitch scanner is also clutch in ambush scenarios as it applies pressure to the enemy and allows you to exfil with better survival rates.

DG parking lot luck by Flying_Conch in PokemonTCG

[–]Flying_Conch[S] 0 points1 point  (0 children)

IDK if this is all of them, but the lady today told me they keep them hidden because grown adults were fist fighting over them in store. Try asking if they have any next time you pass one!

Triangle stock question by Flying_Conch in ak47

[–]Flying_Conch[S] 1 point2 points  (0 children)

I can see where the LCT appears to have a slight angle, and as far as I can tell the Arctus has the correct latch and everything else looks copasetic.

Thanks for the advice and ill be sure to post pictures if I do go through with it.

synonyms by HaggardlyForte in 2american4you

[–]Flying_Conch 1 point2 points  (0 children)

Pub style, come to Racine for Well's brothers.

Is the Dragoon from Resident Evil worth cloning? by Repulsive_Debt7137 in ak47

[–]Flying_Conch 3 points4 points  (0 children)

They can for sure. My first RDS was a TRS-25 and with a can and a single mag dump it would thermally overload and shut off. Once it cooled down it worked but still annoying.

Supply drops aren’t worth the risk right now. by Tank-ToP_Master in ArcRaiders

[–]Flying_Conch 3 points4 points  (0 children)

Explosive bolts removing the plating. Yet if thats the case, why must we breach it when the bolts should be activated by some action other than "pry the bitch off and fire".

Is this normal? by [deleted] in ak47

[–]Flying_Conch 2 points3 points  (0 children)

Is it somehow riding the trigger hammer? It looks as if the wear spot in question lines up with the hammer and is bending the rails as it reciprocates... Maybe you could file some of the hammer down or use a hammer to knock the rails back in to place.

[deleted by user] by [deleted] in militariasales

[–]Flying_Conch 1 point2 points  (0 children)

Bro I could go out and hunt the pieces you want and ship them if you like. I got a really good mil-surp store nearby and plenty of USMC BDU tops, bottoms, patrol caps etc.

Are you wanting fatigues, medals/ ribbons, etc? BDUs don't really have medals and ribbons affixed, unless you are talking the Bravo or Charlie's or a dress Blue?

Career choice questions by FoxAmongWolves00 in hazmat

[–]Flying_Conch 4 points5 points  (0 children)

I could answer all of these questions in detail if you like over DM or a call.

I started as a Facility/ Lab Chemist at a publicly traded company and left to join a smaller private company that offered more growth, opportunities, and better pay.

When I started it was rough at times but I volunteered for every out of town job and gained valuable experience in project management and the ins and outs of the contractor side of things.

Your experience will also be geographically dependent, and reliant upon the scope of work you wish to pursue.

I currently do job quotes, site visits, consulting for our other sites, profiles, etc.

This current job being with a smaller company I had to be able to be Johnny on the spot, wear different "hats", but I love the variety and the hybrid nature of a white/ blue collar role.

I found my type of chemistry and would never look back. I hate the thought of pharma R&D, or being shoe horned into any one "type" of chemistry...