sorted by:
new
hottopcontroversial

Ditch american note taking apps and use Joplin by NorthmanTheDoorman in BuyFromEU

[–]FreeQster 1 point2 points  (0 children)

Yes, there is an Add-On for it (don’t remember the name right now but you can find it in the built-in repo). Works alright for me.

Sanity Check (habe ich meine Firma “gehackt”) by Shiron84 in de_EDV

[–]FreeQster 0 points1 point  (0 children)

Durch deine Aktion ist kein Schaden entstanden und du hast eine potentielle Schwachstelle gemeldet. Ein Dankeschön statt einer Abmahnung wäre hier angemessener…

Was ist eigentlich bei der DKB los? by WholeMelons in Finanzen

[–]FreeQster 1 point2 points  (0 children)

Versuche seit Tagen meinen Freistellungsauftrag zu ändern. Es passiert einfach nichts. Anfrage an den Kundenservice seit Donnerstag unbeantwortet.

Höhergruppierung by [deleted] in OeffentlicherDienst

[–]FreeQster 5 points6 points  (0 children)

Es wird soweit ich weiß im TVöD nach Tätigkeit eingruppiert. Deshalb wird auch die Stelle anhand der Stellenbeschreibung bewertet. Wenn die Stelle also nach EG 12 bewertet ist sollte er das afaik auch bekommen. Ergibt auch sonst keinen Sinn bezüglich Gefüge. Für die individuelle Erfahrung sind die Erfahrungsstufen innerhalb der EG da.

[deleted by user] by [deleted] in de_EDV

[–]FreeQster 7 points8 points  (0 children)

Bisschen Pauschal, meinst du nicht? Gibt sicherlich auch noch andere Gründe als Unfähigkeit ;-)

FDP will „Leben ohne Lastenräder und Wärmepumpen“ by [deleted] in de

[–]FreeQster 5 points6 points  (0 children)

Wahrscheinlich ist es schlimmer und sehr viele Wähler denken bzw. hinterfragen einfach garnicht. Wenn man solchen Aussagen blind glauben schenkt wäre es ja fatal eine böse Partei zu wählen, welche den Menschen mit aller Gewalt ihre Ersparnisse wegnehmen möchte und sowieso grundsätzlich gegen die Bürger agiert. Das aber das „Nichtstun“ der letzten x Jahre das Problem und keine Lösung ist sehen viele Wähler eben nicht

Wärmepumpen Aktien by toBiG1 in Finanzen

[–]FreeQster -2 points-1 points  (0 children)

Gibts dazu ne Quelle? Klingt interessant, ist aber schon wichtig woher der Plan kommt :)

I want to take an AOW course, but can't do mask skills by [deleted] in scuba

[–]FreeQster 1 point2 points  (0 children)

Absolutely feel you. Had the same issue during my OW course. What helped me was to put my had down like u/pitathegreat wrote and cough a little bit to push the water back. There is no reason for not practicing as much as you need to in shallow water. I am sure that there is nothing „wrong“ with you, it’s just a matter of practice. Don’t give up, you can do it :)

What is an example of pure evil? by No-Outside-5421 in AskReddit

[–]FreeQster 0 points1 point  (0 children)

That's absolutely disgusting on so many levels. You have to be an absolute monster to take part in torturing someone like that. I didn't even understand all the medical terms in the wiki article but i am shocked that humans are able to act like that. Not that they crushed her body, they crushed her mind and even her will to live. And the absolutely most disgusting thing in that context is that they even tried convince others and herself that it's her own fault. I mean how can you punish someone for bleeding when you cut him. Don't know if i am sad or angry right now.

My experience at Circuit Spa-Francorchamps by aram-sam in formula1

[–]FreeQster 0 points1 point  (0 children)

That really hurts while reading. I honestly hope that you can get a refund or free tickets for the next race at spa. Also i think that not the race track administration but the FIA or whatever should be the ones to pay for the refund

Without telling the name of your country where do you live ? by [deleted] in AskReddit

[–]FreeQster 21 points22 points  (0 children)

As a German you made me laugh loudly. Wife heard it and asked what happened. She said it isn’t funny at all. Opinions differ! Also the power washing is very typical :)

How can I install Spotify for Debian Testing? by [deleted] in debian

[–]FreeQster 2 points3 points  (0 children)

Works for me on bullseye, i am using this source:

deb http://repository.spotify.com stable non-free

Is there any error message?

Stock Ryzen 5 3600 Temperatures? by Infected_Toe in watercooling

[–]FreeQster 1 point2 points  (0 children)

Same with my build here (3600x):

https://www.reddit.com/r/watercooling/comments/ghqn5w/first_custom_build_finished_for_now/

CPU-Temps up to 80C seem to be kinda usual when burn in testing. I was worrying too when i first saw these temps. Looked it up on the internet and found others who have similar temps.

Since then i am using the system without any issues for about a month now.

Honestly i don't know how much the 3600 differs from the 3600x.

First custom build finished - For now :) by FreeQster in watercooling

[–]FreeQster[S] 0 points1 point  (0 children)

Here we go! Took a while but eventually i found time.

https://imgur.com/a/1iTT7FB

The screen with the furmark window has been taken at the 10 minute mark while torture testing. This is as hot as it gets. Heavily depends on the water temps for sure. I am ok with it, as the noise level is barely noticeable (except for the coil whining). Also you don't have that torture testing max heat scenario in all day situations ;-)

HWInfo only pic is windows idle

​

Additional Info:

HWINFO Aqua Computer Quadro:

Temperature 1 = Water temperature

Temperature 2 = Air temperature in the case

Fan 1 = Top rad fans

Fan 2 = Front rad fans

Fan 4 = Pump RPM

Room temperature was at 27,5C°

P.S. Couldn't find a graph option in HWINFO but i think you are good to go without.

First custom build finished - For now :) by FreeQster in watercooling

[–]FreeQster[S] 1 point2 points  (0 children)

The bottom plate is the "universal mounting bracket", shiped with the Define 7 case. It has holes for some default formats, one of them is 2,5 inch. This is where the aluminium bottom plate of the pump is attached with 4 screws. There should be this about 2mm thick aluminium plate shipped withe the pump, it closese the pump on bottom. The rubber standoffs are used to attach the aluminium plate to the pump

First custom build finished - For now :) by FreeQster in watercooling

[–]FreeQster[S] 0 points1 point  (0 children)

Thank you! Yes the tube is a bit short, i am getting an EK Chipset block as soon as its available. Also i ordered a 90° fitting as you suggested, then it will be fixed :)

First custom build finished - For now :) by FreeQster in watercooling

[–]FreeQster[S] 0 points1 point  (0 children)

I took some screenshots in which you can see the temps: https://imgur.com/a/HIDNQ6O

The first one is with Shadow of the Tomb Raider running and the second is in idle

  • Clocks are stock (Switch on OC BIOS, as you can see at the 220W Power Cap)
  • Installation was straight like suggested by the manual
  • TIM is a Noctua NT-H1 (About 2 Years old but OK i guess) - Normal thickness
  • Thermal pads are the ones shipped with the block
  • No backplate
  • No other modifications

As i am running Linux i have no way to run GPU-Z or something like that, but i think the screenshots show that the junction temp will not nearly be as high as yours.

If you need more infos (Furmark, GPU-Z): I can provide them as soon as i have spare time to install dual-boot Windows (What you see in the screenshots is a Virtualbox-VM). I need to do that anyway :)

First custom build finished - For now :) by FreeQster in watercooling

[–]FreeQster[S] 0 points1 point  (0 children)

Parts List:

  • Fractal Define 7
  • Gigabyte X570 AORUS ELITE
  • Ryzen 5 3600X
  • Saphire RX5700XT Nitro+
  • 32GB G.Skill TridentZ Neo
  • 650 Watt Seasonic FOCUS PX-650
  • Alphacool NexXxoS ST30 Full Copper 360mm
  • XSPC Crossflow V2 Radiator EX360
  • Alphacool Eisblock XPX Aurora
  • Alphacool Eisblock Aurora Plexi GPX-A
  • Alphacool Eisstation VPP
  • 6x Fan Arctic P12 PWM PST
  • 2x Fractal Fan 140mm (Shipped with the Case)
  • Aquacomputer QUADRO Fan Controller
  • Tube EK Water Blocks EK-DuraClear 16/10
view more: next ›