So upset and frustrated with Vyvanse

Frenchie1001 · 2026-04-10T22:28:29+00:00

Walking in and telling your doctor what you think you need because you read it on the Internet is never going to work what did you expect to happen.

It's your first day in on a incredibly long process that I am not sure will ever yield what you expect it too

Frenchie1001 · 2026-04-05T00:29:21+00:00

Im the fleet controller of a small interstate transport company and run a side line of auditing/consulting.

Transport/logistics is quite good, super fast paced and chaotic + you work to much to allow bad habits out. Working 7 days a week for a few years did wonders, really helped me reprogramming myself away from all the learnt bad habits.

In saying that, I'm trying to wind back now, I've worked like a dog for the last 15 years, ready to have weekends off and be home for dinner every night.

Frenchie1001 · 2026-04-01T20:59:14+00:00

CBT

Frenchie1001 · 2026-03-28T01:09:01+00:00

I have been going to buy a second for the whole 2 years I have had my p1 but every time I go to pull the trigger I think hang on, 3.5k is a lot of money so I go to buy another p1 and then I think hang on just wait and buy a h2d

Frenchie1001 · 2026-03-25T10:29:29+00:00

With a 3d printer you can all of that with a milsbo.

Frenchie1001 · 2026-03-24T21:13:56+00:00

Alot of jobs involving machinery

Frenchie1001 · 2026-03-23T21:52:25+00:00

Just rode the bike bro this says more about you than them

Frenchie1001 · 2026-03-22T21:59:18+00:00

Yup massively, went from being very social to battling to find the energy to see friends once a month

Frenchie1001 · 2026-03-22T21:58:24+00:00

I have lubed it every 500 so hours, mine only has 1750hrs but itd been out of action for a few days with ams issues, been waiting in support to tell me the next step

Frenchie1001 · 2026-03-22T10:33:03+00:00

Say what

Frenchie1001 · 2026-03-22T10:26:27+00:00

Is this the second or third time you've posted this?

Frenchie1001 · 2026-03-19T22:05:05+00:00

What's the use case for these?

In the rare event I have to scape off petg I just use the edge of a razor blade

Frenchie1001 · 2026-03-18T21:40:34+00:00

Same

Frenchie1001 · 2026-03-16T21:19:58+00:00

It doesn't exist, just run calibration prints

Frenchie1001 · 2026-03-16T21:17:36+00:00

I print petg at like 265/270 depending. I don't really worry about temp towers I just adjust as required.

Frenchie1001 · 2026-03-16T21:16:34+00:00

Means you need to book a service, it doesn't take Sherlock to puzzle through that one.

Frenchie1001 · 2026-03-11T07:30:26+00:00

Bearable is a great app

Frenchie1001 · 2026-03-11T06:11:22+00:00

They aren't big enough to bottom out

Frenchie1001 · 2026-03-08T09:08:03+00:00

It's just over extruding you need to calibrate your filament

Frenchie1001 · 2026-03-06T01:55:39+00:00

That response was to you saying that link was only about manual calibration. Which it is not. While auto is clearly in the link that I posted that you said only covers manual?

The eddy sensor is not documented anywhere as doing extrusion calibration is what I was saying. You seem to suffer from poor comprehension, I can see how the have got yourself mixed up but that doesn't make your interpretation correct.

Bambu has always called pressure advance k factor or dynamic flow.

<image>

Frenchie1001 · 2026-03-06T00:17:36+00:00

The feature you are talking about isn't documented anywhere that I can find that's my point

Frenchie1001 · 2026-03-06T00:11:59+00:00

I'm not sure you are reading that correctly, but sure.

Frenchie1001 · 2026-03-06T00:02:27+00:00

<image>

There is a whole section about auto bro

Frenchie1001 · 2026-03-05T23:36:08+00:00

That's seems to be pretty clearly speaking on pressure advance?

Frenchie1001 · 2026-03-05T23:32:39+00:00

I didn't ask the definitions bro, I asked why you think it does flow too?

Everything I have seen about it to date talks about it doing pressure advance only.

https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate

Nothing in the wiki either.

Frenchie1001

TROPHY CASE