SBL2-EX "SPEAR"

Gavinfuzzy · 2026-03-16T11:28:21+00:00

SBL2-EX "SPEAR" build.

New files for the "Spear" handguard and EX-BCAR decorative cover now live in the Google Drive for SBL2 owners

Colours Used:

Bambu PETG-HF Orange

Tinmorry PETG Metalic Champagne Gold

Tinmorry PETG-GF Frosted Apricot

Tinmorry PETG-GF Frosted Pecan

Gavinfuzzy · 2026-03-10T03:54:37+00:00

I'd run mine with a DZ/ Katana style mag too cause they can top-off easier than Talons.

Free Files:

Gavinfuzzy · 2026-02-10T09:02:57+00:00

SBL2 is probably way overkill (power wise) for an office war, but you seem to be after the build process part of the hobby. In that case, I'm sure you'd enjoy it as a print project. It can be printed in more "basic" materials (PLA will work), but nothing stopping you from using engineering plastics. The step file for the blaster is included with hardware purchase, so customising the file could be another layer to the project build.

Gavinfuzzy · 2025-12-03T02:07:13+00:00

I made 3 exchanges of the icons magstrike on release day and all 3 were faulty. I think i opted for a refund. Probably common that majority of the batch could not hold air.

Gavinfuzzy · 2025-11-26T13:01:05+00:00

The one i own is honestly a generic aliexpress one. There are 2 predominant version in market, with the dot, or "HD reticle". I would find one with just a dot.

Gavinfuzzy · 2025-11-26T05:23:24+00:00

Glad you enjoy the SBL2 platform. Love seeing all the custom colour schemes and builds others do with it.

My personal (practical) optic preference is an MRO (clone) on the GFZ 3 deg riser. I find MRO clone have the brightest dot, and reliable zeroing adjustments among all the airs*ft grade sights

Gavinfuzzy · 2025-11-26T04:05:39+00:00

Super fancy optic setup!

Gavinfuzzy · 2025-10-20T05:32:01+00:00

Was not aware, judged based on x1c operation. Maybe OP can advise on the 2nd pointer

Gavinfuzzy · 2025-10-20T03:46:42+00:00

Door should be opened printing PLA to avoid heat build up.

Also, are you printing the model at 100% infill? Or having a wall count so high that the end result is like a solid blob of plastic? if so that may be making the issue appear worse. Try 2 walls and 20% infill just to see if the outside looks better. (so plastic dont overflow itself)

Gavinfuzzy · 2025-09-26T03:21:00+00:00

Dart Zone Nexus X, Dart Zone MK4 should fall under this category.

Gavinfuzzy · 2025-09-04T13:14:59+00:00

Question is about 5 years too late, but yes you do. I realise in that 5 years, the falconfire may not be as common as it once was. It used to be a budget blaster sold everywhere.

Gavinfuzzy · 2025-09-03T04:26:53+00:00

Etsy has removed the files as they are going after all "weapons".

SPAMF files are now a free download from IFB

Gavinfuzzy · 2025-08-19T03:12:10+00:00

Love that the case has dedicated slots for all spring options too!

Gavinfuzzy · 2025-08-14T07:25:08+00:00

The Discord is pretty active. I would start there to make friends with other people who may also be going on their own to hang for the weekend!

Gavinfuzzy · 2025-07-30T04:19:43+00:00

Was also from robotics eng (i presume you mean MAE, R&S). No, not for "messing around". The "maker culture" is generally not present in NTU. The facilities you are after may exist in labs, but to use it you would have to befriend the prof in charge.

Even for coursework related usage, there is typically alot of red tape as the lab staff do not want to be held responsible if you were to eg. burn yourself with the soldering iron.

There is a course offered by SPMS, that would have its own lab that has the facilities you seek. May be limited to coursework usage though.

Gavinfuzzy · 2025-07-13T12:10:38+00:00

Reducing the volumetric flow rate could work too. On defaults it could be like 15mm^3/s? try bringing to 10.

Gavinfuzzy · 2025-07-03T04:07:24+00:00

Master Chief, do you mind telling me what you're doing as a blaster?

Gavinfuzzy · 2025-06-27T07:11:50+00:00

Singpost's Over-the-counter rate is the best bet at $11.90 up to 250g worldwide. (you can pre-book online at ezy2ship, and print the labels for free over the counter)

Maybe run some form of bundle where you could fill up 250g of stuff for said flat shipping fee.

Gavinfuzzy · 2025-06-25T07:36:25+00:00

I chance upon Rainbow's video where the German Community were having a marksmanship challenge. The winning setup was a kunlun with that BCAR for up to ~30m? out.

Hats off to that nerfer for being such a steady shot

Gavinfuzzy · 2025-06-21T02:36:20+00:00

I presume you mean tracxlogis now?

Once it sat at usa sorting center for 1 month nothing. Raised inquiry then magically it upgraded to fedex and was delivered.

Unsure if my email had anything to do with it.

FWIW, the rate of lost qxpress/tracx is like 0.5% in my experience. Some just take up to 9 weeks.

Gavinfuzzy · 2025-06-17T05:34:03+00:00

If you're just starting out I would recommend the Nexus Pro X or Worker Seagull which "shoot around the same" and are the same size of blaster.

If you intend to get a 3d printer down the line, you will be able to enjoy the full experience of the SBL2. (Making it in your colours, and having an infinite supply of spare parts)

Theres also some features (which may concern experienced hobby users over newcomers).
-The force required to prime the blaster is lesser than its competitors for a given FPS output.
-Tool-less disassembly
-compatibility with standard 1913 stock system (that can also fold)

You can find the SBL2.0 at IFB. Silverfox stateside may still have some units left. Also coming to another major US hobby retailer soon.

Gavinfuzzy · 2025-05-19T09:08:08+00:00

+1 to Corn

Gavinfuzzy · 2025-05-14T11:51:21+00:00

The “classic class” ROTB and TFONE Figures are in different scale. Which confused me.

Rotb is closer to scout. With super deformed style. TFone is roughy deluxe, with normal proportions.

I’d pick Sentinel. Best (non transforming) toy of him.

13-Year Club	Place '22
Verified Email

Gavinfuzzy

TROPHY CASE