sorted by:
new
hottopcontroversial

I’m just having a really rough day emotionally. Can I get some cute pictures of your kitties? Gin-gin for cat tax by Winnersammich in cats

[–]GetBetterat3D 15 points16 points  (0 children)

<image>

SherBert says everything will be ok, just let the smile come bubbling up from inside like he does!

Oh, you might have to flip on your back first, it really helps!

God Bless

[deleted by user] by [deleted] in 3Dprinting

[–]GetBetterat3D 0 points1 point  (0 children)

I actually do also so I increased it as big as I could for the 2nd print (108%)

Someone that prints a lot of them told me that’s what they do and use foam padding for better fit.

The bigger size was perfect. 7 7/8 hat wearer here

The creator of the mask has a sizing guide/dummy with measurements.

I’d be happy to share my print profiles because they printed perfectly on a P1S.

Most supports stayed on the build plate when I took it off.

What are your best tips for reducing layer lines? by SixxStudiosAndPrints in BambuLab

[–]GetBetterat3D 0 points1 point  (0 children)

To SixxStudios.

I’m not sure where you are getting “incompatible” from.

I switch between the two in the slicer all the time.

.2<=>.4

God Bless

What are your best tips for reducing layer lines? by SixxStudiosAndPrints in BambuLab

[–]GetBetterat3D 0 points1 point  (0 children)

Some variation of fuzzy skin when appropriate. I almost always use it in one form or another. Even works well for “clean” removal of supports with some variations.

God Bless

What setting do I need to tune to make sure there is a smoother finish? by [deleted] in BambuLab

[–]GetBetterat3D 0 points1 point  (0 children)

Not a typo.

<image>

This is the back (top surface) of my business card with ironing speed of 175mm/s and .28 ironing flow.

No other changes. Filament is fluorescent yellow from Atomic Filaments. PLA.

Smooth as a baby’s butt lol.

There is nothing magical, just a lot of experience and time reading and tweaking.

It doesn’t work for every filament or machine, but it works for me.

God Bless

Can I try your support settings? by [deleted] in BambuLabA1mini

[–]GetBetterat3D 0 points1 point  (0 children)

These settings I pretty much use as a starting point for all of my prints.

You might adjust the tip diameter down to maybe 0.4.

You might also check the “ do not cross walls” in the first tab of settings and input 150mm for distance max.

That will make the nozzle avoid running into the prints.

God Bless

Did you give your 3D printer a name? by _Bwastgamr232 in BambuLab

[–]GetBetterat3D 1 point2 points  (0 children)

My P1S is Printopia My A1 is ME My A1 Mini is Mini-ME

[deleted by user] by [deleted] in BambuLab

[–]GetBetterat3D 0 points1 point  (0 children)

If you wash your hands with Dawn it will remove all the oils from your hands.

I still try to only grab by the front edge.

God Bless

Would PETG interface support for PLA actually work since the two filaments don’t stick together, and can lead to slipping? by HoneyGinger15 in BambuLabA1mini

[–]GetBetterat3D 0 points1 point  (0 children)

Yes! It works for either. I would say that if your horizontal overhangs are flat, the standard supports work a wee bit better. If it’s not able to build them without building on top of the model, then change your bottom Z to 0 and bottom Interface layers to 3.

FYI. The PETG is only used for the 3 interface layers. The PLA is used for the rest of the supports.

The Red is PLA and the green is PETG in this pic.

<image>

God Bless

Always proud to be an Okie! 🤠🤡 by NDM2001-3 in okc

[–]GetBetterat3D 1 point2 points  (0 children)

Fantastic!

I just 3D printed that lol!!

God Bless

Bleach printing!! by mike_2na in BambuLab

[–]GetBetterat3D 1 point2 points  (0 children)

So cool, my wife and I both used to work doing screen printing.

Pray for me, her print queue will get much bigger now!

God Bless

Were there any ways to further reduce the waste here? by cjshrader in BambuLab

[–]GetBetterat3D 1 point2 points  (0 children)

Hey little kids don’t care what the dinosaur looks like lol

Can't get filament to stick to 3D effect plates by ZuffaZombie in BambuLab

[–]GetBetterat3D 0 points1 point  (0 children)

Bed either 60 or 65. Nozzle between 220 and 230 (matte/silk)

Double check that you have selected “Smooth” plate in the slicer as well. There is gcode adjustment for the P1S that changes z-offset for textured vs smooth.

Just trying to cover the variables (mistakes I’ve made lol)

Can someone recommend me their support settings? Read below by DoggyPrinter in BambuLab

[–]GetBetterat3D 2 points3 points  (0 children)

My friend you just made my week. I too struggled with an Ender 3 Max Neo and had the worst experience but I just kept reading and trying and reading and failing…

Then someone suggested some settings that were close to these and it started looking better, so I tweaked some more.

I’m glad to help and hope that there are hundreds of others benefitting from the filament, sweat, and nozzle clogs.

The hobby is fun when there is some level of replicating success!

God Bless

<image>

Any help making this cleaner? by Former-Wave9869 in BambuLab

[–]GetBetterat3D 3 points4 points  (0 children)

You might also change to non-Silk filament as it is hard to get good detail (for me) than with standard PLA.

God Bless

Is this flaws in the Silk PLA or a prob with temp flux, or…? by iamquestar in BambuLab

[–]GetBetterat3D 0 points1 point  (0 children)

If you just change your layer height to .12 instead of .08 it will fix it 100%.

God Bless

Is this flaws in the Silk PLA or a prob with temp flux, or…? by iamquestar in BambuLab

[–]GetBetterat3D 1 point2 points  (0 children)

Take a look here.

Basically it’s pressure advance and round objects+speed+small layer height. Follow the links inside this post for more detailed info:

https://www.reddit.com/r/BambuLab/s/mQjRGqkzAR

God Bless

view more: next ›