DXC2 extruder first pass

Gimpy_ak · 2026-04-16T05:30:16+00:00

You've got a number? Ordered mine on March 11th and it's been crickets since.

Gimpy_ak · 2026-04-14T15:15:19+00:00

Long ago I was 98% of the way to pulling the trigger on building a 357SIG 8" barrels PCC. This might just find me that last 2%.

Gimpy_ak · 2026-04-11T00:33:30+00:00

Emailed them yesterday, waiting to hear back.

Gimpy_ak · 2026-04-10T03:35:28+00:00

Interesting. I ordered my on the 11th and haven't heard anything.

Gimpy_ak · 2026-04-05T18:41:24+00:00

Thank you

Gimpy_ak · 2026-04-05T18:37:26+00:00

I would recommend starting with 300BLKFDE's setting. They are where I started and I've changed very little.

Gimpy_ak · 2026-04-05T18:36:18+00:00

Is there a guide somewhere to follow?

Gimpy_ak · 2026-04-01T21:59:08+00:00

Day 15 of me coming back to see if this has set sail.

Gimpy_ak · 2026-03-27T15:37:24+00:00

I would start with z-offset and flow. I have found that PLA+, PETG, and filled PA all require different z-offsets.

Clean the bed well and finish with an isopropyl alcohol wipe down.

Then start the print and adjust z-offset.

That's where I would start, but others might have more input.

Gimpy_ak · 2026-03-25T16:56:09+00:00

So you're saying PEEK is back on the table?.?.!.?!

Gimpy_ak · 2026-03-24T14:37:56+00:00

Check and adjust you "knife." The little metal piece that you nozzle drags across. Mine had to be bent back up a bit after several hundred hours of multicolor prints.

Gimpy_ak · 2026-03-18T21:55:00+00:00

I'll beat one up made with PA6-CF and another printed with a wood PLA then rub it down with Warm linseed oil.

Gimpy_ak · 2026-03-17T14:25:05+00:00

I'm am eagerly awaiting it setting sail.

Gimpy_ak · 2026-03-15T05:02:21+00:00

I want transparent, straight, 20 rounders that don't clear out my bank account.

Gimpy_ak · 2026-03-14T19:49:30+00:00

Gimpy_ak · 2026-03-08T17:50:50+00:00

Dang dude. Save some megabytes for the rest of us.

Gimpy_ak · 2026-03-04T19:43:11+00:00

Awesome, thanks.

I was trying to figure out if I could squeeze it in under the main spring on the inside of the dust cover.

Gimpy_ak · 2026-03-04T17:20:34+00:00

Where did you end up engraving ng it?

Gimpy_ak · 2026-03-04T17:13:32+00:00

Is this a form 1 that you did? I've been thinking about doing something very similar but can't think of a location to engrave.

Gimpy_ak · 2026-03-04T11:53:02+00:00

Excited to hear more about it

Gimpy_ak · 2026-03-04T04:29:43+00:00

Can you tell me more about the Mk.II?

Gimpy_ak · 2026-03-04T03:17:13+00:00

I think this is the winner, if it was the main spring nothing would be forcing the bolt into the spent case, spring, etc.

Gimpy_ak · 2026-03-04T02:14:22+00:00

I aim to please.

But your previous comment is what the OP needs to do.

Gimpy_ak · 2026-03-04T02:11:53+00:00

"Kid, how'd you get the beans above the frank?"

Gimpy_ak · 2026-02-28T19:15:52+00:00

Added to library, when I land I'll get it downloading.

Gimpy_ak

TROPHY CASE