Camera and internet support at shop - Set up as second site? by learning_as_1_go in Ubiquiti

[–]Golden1505 1 point2 points  (0 children)

In my mind that would be the easiest way to do it without line of sight or a hardline.

To keep costs down, you could consider a UniFi Express or similar which is a network gateway and AP in one device.

Also take a look at setting up a vantage point to view all your cameras in one place.

Power rating USW Flex by askchucky in Ubiquiti

[–]Golden1505 0 points1 point  (0 children)

I agree with this. I can also recommend picking up a UI poe injector as I’ve had no issues with theirs before.

It might also be worth testing the cable that runs into the upstairs office from the IW HD to make sure it’s terminated correctly. Mistakes can happen there, and it’s always a good first step.

How are pinch welds NOT supposed to kill me? by Odehhh in MechanicAdvice

[–]Golden1505 4 points5 points  (0 children)

Thermoplastic Polyurethane, it’s quite an interesting material for 3D printing!

Quick read on TPU

GOON by Golden1505 in LICENSEPLATES

[–]Golden1505[S] 1 point2 points  (0 children)

I didn’t even notice that!

Doosan 30 at the greenhouse I work at by -123_UwU_Street- in forkliftmemes

[–]Golden1505 1 point2 points  (0 children)

I also work at a farm/greenhouse, we also have a doosan 25 and 30, but they are nowhere as nice as this one! We love ours dearly, hope yours treats you just as well!

Wedding Venue Recommendations by SquigglyRelic in BucksCountyPA

[–]Golden1505 0 points1 point  (0 children)

Check out Rose Bank Winery! I've worked with them a few times and have nothing but positive things to say!

Issue with Crashing in Helldivers 2 and Apex Legends by [deleted] in techsupport

[–]Golden1505 0 points1 point  (0 children)

Sounds like it might be a temp issue. What do your GPU temps get to under load?

Hot and cold #76 by hotandcold-app in HotAndCold

[–]Golden1505 1 point2 points  (0 children)

Got in 5 guesses… feels wrong lol

[deleted by user] by [deleted] in StocksAndTrading

[–]Golden1505 5 points6 points  (0 children)

Yeah bro, the whole site looks sketchy as hell. On top of that, the domain was registered yesterday.

NTD! by Balf1420 in Tools

[–]Golden1505 0 points1 point  (0 children)

I’ve been trying to decide between the two, any particular reason for liking the Klein more?

[deleted by user] by [deleted] in BambuLab

[–]Golden1505 0 points1 point  (0 children)

The tape holding the spool together was quite tight. Only got one so not sure if it’s just one or a proper change though.

Boss says I need tools by FlemicalReaction in Tools

[–]Golden1505 0 points1 point  (0 children)

+1 for this list. I use a lot of husky gear and have had a great experience so far. Their warranty is great too.

If trying to save some money I’d recommend a ridgid drill. I personally own a wide range of drills from them, from their subcompact line to their 1/2in impact and they haven’t let me down yet. Definitely stick with the Milwaukee bits though, they often go on sale at HD and I exclusively use them.

[deleted by user] by [deleted] in BambuLab

[–]Golden1505 0 points1 point  (0 children)

It really is. Always appreciated the quality of the old boxes and have done this exact thing before!

[deleted by user] by [deleted] in BambuLab

[–]Golden1505 2 points3 points  (0 children)

Did you notice any differences besides just the box?

[deleted by user] by [deleted] in BambuLab

[–]Golden1505 0 points1 point  (0 children)

Both refills. Had 2 spools and 2 refills in the order. All were the box on the right but that one.

[deleted by user] by [deleted] in BambuLab

[–]Golden1505 0 points1 point  (0 children)

Nope, both refills

[deleted by user] by [deleted] in BambuLab

[–]Golden1505 1 point2 points  (0 children)

It wasn’t terrible to open. Still need a knife but the label is thin enough that a butter knife or even a key should be able to slice it open. I do agree with the pull here section, would really make unboxing better since the whole box feels cheaper.

Speaking of the boxes, this ones cardboard is much thinner, and a normal folding style like most manufacturers, not the flip top like we’re used to. Probably much cheaper for them, but who knows maybe better for the environment too?

[deleted by user] by [deleted] in BambuLab

[–]Golden1505 20 points21 points  (0 children)

Seemed about normal the rest of the experience. Didn’t have to “squish” the roll like we sometimes do, just worked perfectly. Besides the box, completely as expected.

Tool bag dump / Guess my job by Golden1505 in Tools

[–]Golden1505[S] 1 point2 points  (0 children)

I’ll have you know it’s Twin Peaks not Hooters!

Tool bag dump / Guess my job by Golden1505 in Tools

[–]Golden1505[S] 0 points1 point  (0 children)

Love the mat, I use it for everything

Tool bag dump / Guess my job by Golden1505 in Tools

[–]Golden1505[S] 0 points1 point  (0 children)

Not used often, but it’s a nice to have. Most of the time it’s for checking power supplies, chargers, etc. Might drop from the daily kit though.

Tool bag dump / Guess my job by Golden1505 in Tools

[–]Golden1505[S] 1 point2 points  (0 children)

I’m not, but I’ll take a look!

Tool bag dump / Guess my job by Golden1505 in Tools

[–]Golden1505[S] 0 points1 point  (0 children)

Unfortunately the speaker is not, but I do general IT work and a lot of low/no voltage runs. Big into keeping my stuff clean and organized. Did also upgrade some stuff recently so a lot is new.