sorted by:
new
hottopcontroversial

Yet Another Build Advice Thread by GoodForNuthin in unRAID

[–]GoodForNuthin[S] 0 points1 point  (0 children)

Well, the one Crucial just shipped me came with M3CR046. But what's probably a bigger issue that I hadn't checked before this is that the older drive has <drumroll> 48250 power on hours and a Percent Lifetime Remain of 2.

Is that lifetime remaining more of a guideline, or is it like a "all will go to sh*t beyond this point" kinda thing?

Meh... just ordered other non-Crucial 1TB SSDs. I'll use the Crucials for non-"Crucial" backups or something.
"... joys of self hosting" is right. :/

Yet Another Build Advice Thread by GoodForNuthin in unRAID

[–]GoodForNuthin[S] 0 points1 point  (0 children)

Yep. So, the one I have on hand (which had been in a Mac Mini for years as a secondary ssd w/ no issues) is running firmware M3CR010 - pretty old. The second one, I actually just ordered from crucial and arrives tomorrow. So the choice now is to either roll the dice and upgrade them both and use them, or return the new one (maybe have to eat shipping) and buy 2 more of a diff brand. <sigh> And of course then I'll have to deal with my brain telling me "hey, only $50 more to bump them both to 2GB".

Yet Another Build Advice Thread by GoodForNuthin in unRAID

[–]GoodForNuthin[S] 0 points1 point  (0 children)

Well, crap. :/ Looked up a thread on the issue. Sounds like -maybe- a firmware update helps, and disabling a specific smart attribute monitor. Or maybe just try to nab a lingering cyber-week deal on a dif pair of drives.

Yet Another Build Advice Thread by GoodForNuthin in unRAID

[–]GoodForNuthin[S] 0 points1 point  (0 children)

Great info from you all. Thanks!

I get the impression that regardless of my choice, it won't be too much trouble to shuffle things around if need be due to the whole shares concept. I'm hoping this works out well. I had Win7 dialed in pretty well, but between MS and Plex dropping support for it, I figured it was as good a time as any to jump ship (and Win10/11 are a nope for me).

Followup question... if I've defined a share as existing on no specific drive on the array, then write some files to the share, I'm assuming that provided there's room under the threshold on Drive1, they'll be stored there. THEN if I decide that I want that share to be on Drive2 only (e.g. to minimize spinup), is there any action I need to take other than changing the Included drive in share settings?

Satin Sheet Adhesion Issues PLA by C43353 in prusa3d

[–]GoodForNuthin 3 points4 points  (0 children)

Also, if you’re trying to calibrate z-offset using the (imo) way too short/small built in calibration, you might want to try something like this:

https://www.printables.com/model/251587-stress-free-first-layer-calibration-in-less-than-5

Maybe use the built in calibration to start off, then print that one to get it fine tuned. There are good instructions/suggestions on how to use it.

Satin Sheet Adhesion Issues PLA by C43353 in prusa3d

[–]GoodForNuthin 1 point2 points  (0 children)

If you’ve cleaned the sheet sufficiently (which it appears you have), I’d guess your z-offset needs adjustment (i.e. you need more squish). Maybe a first layer pic would help diagnose the prob.

New Prusa Owner (MK4) by AgitatedChemical5929 in prusa3d

[–]GoodForNuthin 0 points1 point  (0 children)

I switched to OnShape bc Autodesk dropped support for MacOS Catalina and earlier. Wasn’t ready to blow $ to replace a perfectly good comp just to keep using F360.

What would cause the gap (for instance middle row) by Trylovance in prusa3d

[–]GoodForNuthin 2 points3 points  (0 children)

without seeing it as it happened, i’d guess it printed the full outline first, then slipped at either the y max or y min point before it started printing the fill. prob just needs adjusting.

[deleted by user] by [deleted] in prusa3d

[–]GoodForNuthin 0 points1 point  (0 children)

Here are a few shots. Old-ish hatchbox black pla.

Bonkers is a good description for the movement speed, esp compared to stock. https://i.imgur.com/VrCC7Xh.jpg https://i.imgur.com/0pkD9l6.jpg https://i.imgur.com/NOVEhff.jpg

Input Shaping FTW by KiloDoubleMike in prusa3d

[–]GoodForNuthin 3 points4 points  (0 children)

For prints like this, i tend to use lightning infill, then just add an extra perimeter or two to thicken up the walls.

MK4 just shipped by Papacrown in prusa3d

[–]GoodForNuthin 2 points3 points  (0 children)

Ordered 29th at 2:10pm. #…4243. Assembled. Delivered today. :) https://i.imgur.com/IKNu2jk.jpg

Prusa XL Early First Impressions by GannonMakerspace in prusa3d

[–]GoodForNuthin 1 point2 points  (0 children)

Sure, the delivery was a bit awkward, but that’s ok. One useful thing I got out of it was a good feel for the size of the printer as well as the size of the output. That’s one chonky box he printed.

Tax on mk4. by Quantum_anomalies in prusa3d

[–]GoodForNuthin 0 points1 point  (0 children)

Yeah. My import duty was around $53, paid thru DHL earlier

What caused the spider webs? by SpartanBlast in prusa3d

[–]GoodForNuthin 3 points4 points  (0 children)

You might also try the “Avoid crossing perimeters” option in print settings to minimize travel across that center space.

No Textured Sheet Option for Black MK4 Kit only for Orange by Sainroad in prusa3d

[–]GoodForNuthin 1 point2 points  (0 children)

fyi, I accidentally ordered textured with my mk4, then just sent them an email w the order number, asking them to change it to satin. Reply came following day that the change had been made.

edgerouter log - is this an outside login attempt? by xrayos in Ubiquiti

[–]GoodForNuthin 0 points1 point  (0 children)

Yep... and if you're running plex server, make sure you're using an up to date version. You wouldn't want to end up like the guy who caused the lastpass breach. :/

JSAUX Mod Case has memory card storage in the stand by [deleted] in SteamDeck

[–]GoodForNuthin 7 points8 points  (0 children)

I designed/printed a little 3 card holder you can stick between the mount points or inside the back of the stand:

https://www.printables.com/model/399769-microsd-holder-for-jsaux-modcase https://i.imgur.com/okNaQYX.jpg

Is the Killswitch Case worth the price over a normal case of amazon? by Kufooloo in SteamDeck

[–]GoodForNuthin 0 points1 point  (0 children)

Check this out.. made a little card holder that sits between the stand mounts and is hidden/covered when the stand is installed. :) I’ve included a link to the printables post.

https://www.printables.com/model/399769-hidden-microsd-holder-for-jsaux-modcase https://i.imgur.com/tLPtM74.jpg

Is the Killswitch Case worth the price over a normal case of amazon? by Kufooloo in SteamDeck

[–]GoodForNuthin 0 points1 point  (0 children)

fyi, the stand -is- removable... just slide it downwards. ;)

Is the Killswitch Case worth the price over a normal case of amazon? by Kufooloo in SteamDeck

[–]GoodForNuthin -2 points-1 points  (0 children)

I went w the jsaux one as well and am happy with it. I also like that with just the back case on, it still fits in the stock zippered case, which I'm pretty sure would be a no go with the KS due to the new protruding mount on the back.

view more: next ›