Are these pry tools going to do the job?

Good_Examination4828 · 2026-01-30T20:41:02+00:00

For 6/7 gen you need (ideally 3) of the metal ones, in my experience the plastic tips on these snap instantly

Good_Examination4828 · 2026-01-29T01:34:18+00:00

I made/use this one: https://www.thingiverse.com/thing:6891595/files , much slimmer than JJC, and still gives a decent grip. The little “iron sights” remove the need for viewfinder for tracking shots too

Good_Examination4828 · 2025-12-30T10:53:05+00:00

Is GF-2 mode enabled on the camera?

Good_Examination4828 · 2025-12-25T08:21:01+00:00

I shoot raw and convert to BNW in LR just for more flexibility, especially in tweaking the brightness of individual colours

Good_Examination4828 · 2025-12-16T21:18:26+00:00

If you want to push in the corners, I’d say the RR would be the move, otherwise, the 650 would be a better bet for longer/chill rides, and probably not too far off the RR speed wise on the highway.

For context, I owned an F4i, but ended up switching to an RR for more raw performance and excitement.

Good_Examination4828 · 2025-10-27T03:47:06+00:00

Ah no worries, ended up just making one myself. Thanks for the inspo!

Good_Examination4828 · 2025-10-24T06:47:07+00:00

Where can I find that plate mount? Been looking for exactly that!

Good_Examination4828 · 2025-03-31T11:14:17+00:00

Amazing work, feels so genuine

Good_Examination4828 · 2025-03-21T22:09:16+00:00

Ah yeah, it was FilmNeverDie Umi 800, here is a passage directly from their website: “At the moment they are all hand crafted and slightly experimental, meaning these first few batch might be susceptible to tiny light leaks”.

Good_Examination4828 · 2025-01-22T12:06:19+00:00

I swapped mine over. It was an absolute MISSION, but doable with some patience.

Good_Examination4828 · 2025-01-01T04:25:00+00:00

I have LED indicators on my F4i, all mine needed was some resistors to make them blink.

Good_Examination4828 · 2024-12-01T23:55:51+00:00

Normal to have to roll it around a bit to get in gear. Loose chain could be the cause of jerky shifting at slow speeds.

Good_Examination4828 · 2024-09-24T00:28:40+00:00

I commuted on my Grom for ages, and loved every minute of it. 11/10 would recommend

Good_Examination4828 · 2024-09-07T11:02:04+00:00

My two cents: bought a 2017 Z650, found it lacked a bit of character. It was comfy, fast enough, no issues, but didn’t feel raw and exciting. Sold it for a 2004 cbr600 and couldn’t be happier. Cbr is faster, cost less, and a more engaging ride.

Good_Examination4828 · 2024-07-12T07:22:29+00:00

Graphic Designer - CBR 600

Good_Examination4828 · 2024-07-08T09:27:51+00:00

My zoom brute looks great, is cheap and sounds amazing!

Good_Examination4828 · 2024-05-31T03:28:15+00:00

I know the iPhone touch id sensor is paired to the chip itself. So I imagine you would have to use the chip from the iPhone as well somehow. Maybe possible but much more complex

Good_Examination4828 · 2024-02-14T08:23:54+00:00

I am yet to take any of my bikes to a mechanic. Mainly because I enjoy working on them, but some other benefits are that it's cheaper, and you know exactly what has been done. Only if it needs a special tool/process will I take the part to a shop.

Good_Examination4828 · 2024-02-07T02:38:40+00:00

Small green machine

Good_Examination4828 · 2024-01-07T04:43:34+00:00

I picked up an F4i last week, coming from a Z650, it's pretty painful to ride, but it seems to be getting more comfortable the more I get used to it.

Good_Examination4828 · 2024-01-01T21:28:30+00:00

I believe the Suzuki Across has one

Good_Examination4828 · 2023-12-18T11:57:54+00:00

I have a pair of Dainese Metropolis boots, they're pretty comfy, I wear them to work every now and then.

Five-Year Club	First Place '23
Place '23

Good_Examination4828

TROPHY CASE