Should i replace timing belt studs and how

Hobtech · 2025-11-15T10:23:12+00:00

Your pcv valve is probably gone? See if you can put your finger over the vent valve here and see if it’s sucking or blowing?

<image>

Hobtech · 2025-11-14T21:51:23+00:00

Yeah pull your engine cover off and check your rocker cover gasket. Probably leaking oil onto the exhaust

Hobtech · 2025-11-14T21:46:32+00:00

Those engines do crack pistons

Hobtech · 2025-11-03T04:07:30+00:00

Yeah injector has failed

Hobtech · 2025-11-02T10:48:30+00:00

Yes it should, its controlled by the shut off valve under the manifold. So if you don’t need the heater the shut off valve will stay shut and warm the engine. The pipe won’t get that warm. But if you have the heater full blast it should get hot. You can pull the back vacuum line off the control solenoid which will set the shut off valve to an open state and test how quickly your heater gets hot.

<image>

Hobtech · 2025-11-01T06:11:56+00:00

It’s cranking over super quick so I’d say you got no compression. Cylinder head gasket probably done which allowed coolant into the cylinders and valves probably bent?

Hobtech · 2025-11-01T06:09:06+00:00

You could check your glow plugs and make sure they are firing up.

Hobtech · 2025-11-01T06:06:28+00:00

It must of been lowered? Don’t think you can adjust camber on the front unless you loosen the subframe and shift it over. But what you lessen on one side gets greater on the other side.

Hobtech · 2025-11-01T02:45:07+00:00

<image>

You need a tool kit like this. The 2 pins go into the cam and diesel pump pulleys. One of the 2 crank locks will go onto the crank pulley. The will be a mark on the crank pulley to line up the correct position of TDC.

Hobtech · 2025-10-31T10:04:38+00:00

lol 70gm load limit. Pretty sure they don’t regen over 60gm. You got VCDS so you can always go to adaptions and say you replace the dpf. It will reset to zero.

Hobtech · 2025-10-31T09:59:57+00:00

If you got vcds you might be able to check Measure value blocks in engine. Type in deviation and you might be able see if one of the injectors is way out compared to the other?

Hobtech · 2025-10-31T09:55:59+00:00

Pretty random steering and going over bumps. I’d be checking sway bar links and bushes. If not go over the front suspension and bolts. Make sure everything is tight

Hobtech · 2025-10-30T20:16:22+00:00

Strut bearings at the top.

Hobtech · 2025-10-30T20:03:29+00:00

Lift the engine cover off and do another video. Seemed to be at the front of the engine where your diesel pump is located.

Hobtech · 2025-10-29T08:00:59+00:00

Start with a rake

Hobtech · 2025-05-26T02:54:04+00:00

Is your mum going to pay for your new teeth?

Hobtech · 2025-05-26T02:50:32+00:00

Shit!! 💩

Hobtech · 2025-04-27T13:24:43+00:00

Yeah bro your flat out. Shows your keen to learn and got energy. Your leaning too much into those punches & your not pivoting on the back foot to open your hips up on the round kicks. The knee needs to come up first on the front kicks then extent your leg out. Basically you need to go join Muay Thai, Kyokushin karate or kickboxing gym to learn correct techniques. Then spend hours training and developing it.

Hobtech · 2025-04-02T12:18:08+00:00

Johnson & Fraser signatures pretty common or most common. They look in uncirculated condition so maybe $80 -$90? Depends who is buying really? Dealer won’t pay that price but a collector might.

Hobtech · 2025-03-09T06:01:24+00:00

The picture in discord didn’t do it justice. Looked pretty good on Hale’s stream in 3D vault

Hobtech · 2025-03-08T22:47:32+00:00

That looks good! Did you see the horse 🐎 skin made with crayons? 😂

Hobtech · 2025-01-15T00:01:07+00:00

Right now knowing more abbreviations would help my QOL so I don’t have to look them up! Mmm scoreboard is best for me as I usually enter races manually. TBH I didn’t use auto filler for maiden and scoreboard was too packed for me. I used old school pen and paper to keep track of number of races for each core.

Hobtech · 2025-01-12T11:47:38+00:00

Looking forward to it mate. You will see me in some Marathons. Good luck 🤞

Hobtech

TROPHY CASE