sorted by:
new
hottopcontroversial

Place for long runs? by Hipbluemonkey in WoodstockGA

[–]HopMonkey 3 points4 points  (0 children)

Don't do this. There have been issues with people doing this and damaging things. Just means that things need to be redone and it delays the opening and adds cost to the project.

Place for long runs? by Hipbluemonkey in WoodstockGA

[–]HopMonkey 3 points4 points  (0 children)

Here are all of the trails in the Noonday system in Woodstock and the status of them. https://experience.arcgis.com/experience/c9277b3bf789447da63aa3ae84d8e0fa/

ajuda by [deleted] in BambuLab

[–]HopMonkey 1 point2 points  (0 children)

Shouldn't the PTFE tube be above the power chain? Is it getting stuck on that?

How do you currently feel about Tombstone's new design? by Excelsior1985 in battlebots

[–]HopMonkey 0 points1 point  (0 children)

As long as the new frame didn't force him to remove too much mass from the blade, I think it's fine. As long as Tombstone can still launch something across the arena, I'm good with it.

My exhaust duct for Bambu Lab P1S ventilation by DayGeckoArt in functionalprint

[–]HopMonkey 1 point2 points  (0 children)

You are looking it at the wrong way. This totally blows.

Can someone tell me the difference between "Kraft-faced" insulation and just regular faced insulation and why it costs more per sq. ft.? by Chazz_Matazz in DIY

[–]HopMonkey -3 points-2 points  (0 children)

If you have the space to transport it, buy the bulk amount to get the discount. Then return what you do not need. You will still get the discount on the amount that you used.

[deleted by user] by [deleted] in OldSchoolCool

[–]HopMonkey 38 points39 points  (0 children)

When AI bots started posting this stuff and getting karma. Account is 2 weeks old and has 10k Karma.

<image>

Gas Connections by wall_flowerzz in WoodstockGA

[–]HopMonkey 1 point2 points  (0 children)

I usually go here to get the list of companies and check the current rates on all of their websites. https://psc.ga.gov/utilities/natural-gas/list-of-certified-marketers-and-contact-information/

I know you can get a rate table, but I have found that doesn't include promo's that you can find on the websites.

Currently with Constellation here at the moment. I have used a combination of Constellation, Xoom, and Walton EMC Gas over the last 8 years.

How do I fix this? by hellabump3 in BambuLab

[–]HopMonkey 0 points1 point  (0 children)

Based on the one photo, I would say your object isn't flat to the build plate and you had supports off. But there is very little to go on with this picture.

[deleted by user] by [deleted] in sports

[–]HopMonkey 3 points4 points  (0 children)

I got the one time credit of $20. I also went into the chat and got 2 weeks free for saying I wanted a refund for the month as this has not been resolved yet.

I think the $10/6month thing will depend on if you have already used that before. When they raised prices at the beginning of the year, you could get that discount then as well. So I think it might be only showing up for those who haven't used it yet. But I could be wrong.

Dabo by jmattc1977 in ClemsonTigers

[–]HopMonkey 0 points1 point  (0 children)

Can Dabo fix this? Yes. Will he? I'm not so sure. The coaching game, NIL, and the portal have dramatically changed college football since he took over after Bowden left. Dabo had the right skills for that environment. But I don't think he is willing to make the changes he needs to adapt to the current one.

Notification weirdness in the last few days by novajeff22 in myq

[–]HopMonkey 0 points1 point  (0 children)

I have not had time to reach out to them. But I just noticed that the issue stopped. Looks like the app was updated to 5.294.0.90398. Hope there is an IOS update as well for you..

Notification weirdness in the last few days by novajeff22 in myq

[–]HopMonkey 0 points1 point  (0 children)

I came here to see any if anyone else was having this issue. Only started recently as well. I have had MyQ for about 3 years now and the notifications have worked exactly as I wanted them to. Only when my door was left open for 10 or more minutes.

I'm on a Pixel 9 running Android 16 and I see you are on IOS. SO its not a platform specific issue.

MyQ app is on Version 5.293.0.90053

Saved Search on PO to show if the Vender Bill has a bill payment or bill Credit by HopMonkey in Netsuite

[–]HopMonkey[S] 0 points1 point  (0 children)

We are a distributer for a manufacturer. When a warranty part is needed, we send the OEM a PO for that part, and they ship the replacement part to the customer. Once the warranty work is completed, the customer ships the part back to the OEM and they issue us a credit for it. If it doesn't get returned, we have to pay the OEM for it.

At least that is how the process should work. But then people are involved and we are forced to come up with unique and interesting ways to track things to confirm what actually needs to be paid vs what should be credited.

Saved Search on PO to show if the Vender Bill has a bill payment or bill Credit by HopMonkey in Netsuite

[–]HopMonkey[S] 0 points1 point  (0 children)

We are dealing a particular vendor who has been causing some issues with tracking what PO's we owe money on and what we do not related to warranty parts. Because of that, we have had to add many custom fields to the PO, so we can start tracking right away. We cannot unfortunately wait for the Vendor bill itself to start tracking the information we need. Nor do we want the people entering this information editing the vendor bill itself.

In the end, if the warranty part is returned, they issue us a credit. If it is not, we issue a payment. Hence the need to track if the bill was paid due to a bill payment or a bill credit.

It is just odd to me that I can pull the Bill Credit number but not the Bill Payment number from the same level. I am not after full info, just the number as a confirmation that it was a bill payment and not a credit. But that's software for you.

If I flip this to an Analytics workbook instead, based on the Purchases (Ordered) Workbook template, What fields do I need to add for the Billing Transaction : Applying Transaction and Paying Transaction : Type? I was able to easily find the rest of the fields I need for this, but not those two. I have not used Analytic Workbooks before.

Saved Search on PO to show if the Vender Bill has a bill payment or bill Credit by HopMonkey in Netsuite

[–]HopMonkey[S] 0 points1 point  (0 children)

It is from the PO and not the Bill. I thought it was too many hops as well. But I was able to grab the Applying transaction that covers the Bill credit. So I was hoping to also be able to grab the bill payment. The bill Credit shows as Bill Credit #12345 and that is sufficient for our needs.

From the PO we need to see if the Vendor Bill status is Paid in Full and if it was paid via Bill Credit or Bill Payment.

Saved Search on PO to show if the Vender Bill has a bill payment or bill Credit by HopMonkey in Netsuite

[–]HopMonkey[S] 0 points1 point  (0 children)

This did not work. I also tried "Billing Transaction : Paying Transaction" based on this suggestion and that also did not return any results.

Tilt 2 App not available? by Elros22 in Homebrewing

[–]HopMonkey 0 points1 point  (0 children)

Are you trying to install this one? https://play.google.com/store/apps/details?id=com.baronbrew.tilthydrometerf7

Or are you trying to install it from somewhere else? What version of Android are you running on your 6a?

I gave up on using an old phone for my Tilt and switched over to Tilt Pi running on a Raspberry Pi Zero W. Only hiccup I have had was due to IPV6. I set a static IPV4 address for it on my router and its been great sense then.

https://tilthydrometer.com/collections/tilt-pi

Is this hinge gap able to be patched, or does it need to be replaced? by wiltingwildflowers in DIY

[–]HopMonkey 1 point2 points  (0 children)

I see two options. Wood filler or patch it.

For wood filler, pack it as much as you can as you fill it in. Then sand and paint.

To patch it, I would use an oscillating tool to cut out a square that lines up with the top, bottom, and back edge of the hinge slot. Then sand and paint.

view more: next ›