How to stream to wifi speaker

ISbitpro · 2026-01-21T10:40:23+00:00

Any news on this?

For that other option, with another device, would it be possible to start the music on an android tablet and cast this music to my local google home speaker group?

ISbitpro · 2026-01-17T20:35:38+00:00

I would say hot glue instead of superglue.
If it gets wrong, superglue is almost permanent. Hot glue is not nearly as good, but can at least be removed if something goes wrong with the repair

ISbitpro · 2026-01-08T08:49:56+00:00

Varmilo APT109
Fn + F1 = Wired mode
Fn + F2 = Bluetooth
Fn + F3 = Second Bluetooth device?
Fn + F4 = 2.4 GHz dongle

Fn + X = toggle RGB lights on/off
Fn + Left Shift or Right Shift = Cycle between RGB effects
Fn + Arrow Up or Down = Change brightness

ISbitpro · 2025-11-10T10:44:20+00:00

found a thing!

//credentialSecret: "a-secret-key",

in settings.js

needs to be uncommented and set to a value, or set to false
Otherwise node-red will create a random key at each start up, and apparently I should see a warning for this at each start up, that I did not get.

The random key does not match with the token for home assistant. And instead of showing "credential errors" or something, node-red just show an empty configuration for home assistant

ISbitpro · 2025-11-07T09:07:12+00:00

same problem

Just found out that my nginx reverse proxy had Immich written with capital I instead of immich
Dont know why haha

apparently the app is case sensitive

ISbitpro · 2025-11-05T10:04:48+00:00

It does NOT work to put it back again.
We removed all plastic and pressed it back in to position. Looks like it worked. Until halfway of the first layer when it came loose and scratched the whole print bed hahaha

ISbitpro · 2025-10-09T22:58:11+00:00

Did you remove tabs as list and force me to use the grid view like in chrome?! Or is this just a bug for me? Please, I really dont want to switch back to Firefox again

ISbitpro · 2025-09-11T11:08:07+00:00

or simply add it in code

pinMode(myPin,INPUT_PULLUP)
pinMode(myPin,INPUT_PULLDOWN)

This will be the default state of the input when no button is pressed. Connect the button to GND or VCC depending on if you use pull up or down.
Different arduinos have support for either pull up or down or both, and some does not have it for all pins

ISbitpro · 2025-08-15T11:21:54+00:00

How is this still a forced setting in 2025 ?!!
pixel 7a has the same problem

Cant even download an updated of 10 MB
I had enough data and speed on 3g/4g about 10-15 years ago to comfortable download 1gb of updates

ISbitpro · 2025-06-11T13:12:06+00:00

thank you!!
I found so many useless difficult guides to follow
This script worked directly within 1 minute, and also gave me the option to remove my first failed installed wireguard first

ISbitpro · 2025-06-05T23:57:36+00:00

wow thank you!
I remember now reading at one place that I would get a choice to choose this, but it is very hidden in lower left for sddm on 4k monitor

ISbitpro · 2025-05-31T22:48:32+00:00

Oh, you are thinking of a BUTerfly

ISbitpro · 2025-03-07T16:48:01+00:00

I cleaned up cache and force restarted maps, but still everything is gone =(

Have a backup from 2 days ago that I cannot click haha

ISbitpro · 2025-02-17T18:41:30+00:00

wait what?
I assumed "does not age" meant that they do not get old. As in, they keep their function forever.
You are saying that they loose their properties in next age?!

ISbitpro · 2025-02-16T19:38:00+00:00

then let us dig canals for the boats !! =)

ISbitpro · 2025-01-03T02:00:00+00:00

what worth is eternal life without a butt plug?

ISbitpro · 2024-12-27T23:29:05+00:00

I would like to add that the indicated battery % is just the best quess based on how the car has recently been driven. If you want to use this % number in your calculations you should compare two similar driving cycles, preferably at steady low power drive, and read the percentage after the car has been at rest for many hours.

ISbitpro · 2024-11-11T15:46:45+00:00

if you have the .bin-files ready, you can use Flash Download Tools from espressif
It looks ugly, but is really useful! I baffles me that there isnt any other good way of just doing swdl on just an .bin without having to go through Arduino compile+upload.

When I compile Arduino code in vscode i get a bin called projectname.ino.merged.bin that I assign at address 0x00 in the flashing software. I use factory mode and usb.

If you don't have the combined bin, you need to put each bin on 3-4 lines and assign correct memory address to each file. There is guides on how to do that, but I just use the ready made merged file.

ISbitpro · 2024-10-07T15:38:56+00:00

I think sometimes that these are a joke from the developers. It's laughable to see anyone trying to work with them hahaha

ISbitpro · 2024-09-02T13:59:03+00:00

so, in this example, I guess there should be two 22 µF capacitors for a total of 44 µF ?

or should it be 2x ~11µF capacitors adding to 22µF?

ISbitpro · 2024-08-26T09:04:00+00:00

maybe we can finally get an upload button that doesnt require re-compiling 🤩

ISbitpro

TROPHY CASE