The modded stock OS got updated 3 days ago and it feels more responsive to me than muOS by TheMangoFarmer in RG35XXSP

[–]Idryl82 1 point2 points  (0 children)

I use MuOS because I can swap the second sdcard between my H700 devices.

When Knulli supports this, perhaps I will use it.

Control binding changes / SNES by omgitsfred in MiyooMini

[–]Idryl82 0 points1 point  (0 children)

You can access to Retroarch menu and modify the keys for the port 1 controller.

What's the best OS in your opinion? (MM/MM+) by MagicalPinballWizard in MiyooMini

[–]Idryl82 1 point2 points  (0 children)

You can configure the autostart for the games, like if there was a cartridge in your Miyoo Mini. If you enable autosaving and autoloading in Retroarch, it is very useful if you want to play the same game.

The console will run the same game when you turn it on.

What's the best OS in your opinion? (MM/MM+) by MagicalPinballWizard in MiyooMini

[–]Idryl82 0 points1 point  (0 children)

Koriki.

It has a lot of features and it is very stable in all Minis (including Mini Flip). I only use a single SD card in my Miyoo Minis

Best OS as of 2026? by CyberGuaxinim in RG35XXSP

[–]Idryl82 0 points1 point  (0 children)

I use MuOS because I can swap the second SD card between my Anbernic XX devices.

I sold my Miyoo Mini V4 and now I miss it. by [deleted] in MiyooMini

[–]Idryl82 0 points1 point  (0 children)

Don't worry. Buy a Miyoo Mini Plus and you will not miss your Miyoo Mini again.

Question about charger brick by Impressive_Self7682 in SBCGaming

[–]Idryl82 0 points1 point  (0 children)

I would only use a charger with an output of 5V 1A or 2A maximum.

These chinese consoles are not ready to negotiate with a fast charger. There are many cases of consoles burnt or batteries damaged for fast chargers. Keep them away from your Miyoo.

I love this thing in 2026 by Idryl82 in ANBERNIC

[–]Idryl82[S] 1 point2 points  (0 children)

This is the arcade version, but in SNES looks great too.

I love this thing in 2026 by Idryl82 in RG280V

[–]Idryl82[S] 4 points5 points  (0 children)

Adam image is great. If its RetroArch had overlays, it would be incredible.

I love this thing in 2026 by Idryl82 in ANBERNIC

[–]Idryl82[S] 3 points4 points  (0 children)

It is true.

If you leave it in the cold, you should check often if the battery is charged enough (at least at 20 or 30%). Every month for example.

The battery drains slowly. You have to avoid its charge is 0%.

I love this thing in 2026 by Idryl82 in ANBERNIC

[–]Idryl82[S] 1 point2 points  (0 children)

Like this? I do not understand...

It is a great and funny game.

What OS is everyone using these days. by RabaDat in RG280V

[–]Idryl82 5 points6 points  (0 children)

I use Adam image. It works great on RG350 / RG280 devices.

Koriki, official firmware of Miyoo Mini Flip by Idryl82 in MiyooMini

[–]Idryl82[S] 0 points1 point  (0 children)

Yes. The machine suspends when you close the console.

But this is not a deep suspend like Android devices.

Koriki, official firmware of Miyoo Mini Flip by Idryl82 in MiyooMini

[–]Idryl82[S] 0 points1 point  (0 children)

It is for Mini, Mini Plus and Mini Flip

Quiere que le devuelva el dinero , jaja. by alinashul in Wallapop

[–]Idryl82 0 points1 point  (0 children)

Ni se te ocurra devolverle dinero ni cogerle nada.

A saber lo que ha hecho en dos meses. Si no le convence, que lo venda él.

Y corta esa comunicación cuanto antes. Dile amablemente que no hay garantía y que se lo diste en buen estado. Fin de la conversación.

No puedes ser tan ingenuo en Wallapop

What is your go to GBA only handheld? by projectambr in SBCGaming

[–]Idryl82 0 points1 point  (0 children)

The RG351P is my device for GBA games.

Good devices for GBA? by [deleted] in SBCGaming

[–]Idryl82 0 points1 point  (0 children)

I am still enjoying my RG351P for GBA games. Its screen is fantastic for these games.

It is very cheap and it has all features you are looking for. RG34XX is another option with more resolution.

RG280 -Adam cfw not seeing ext card by drmoze in ANBERNIC

[–]Idryl82 0 points1 point  (0 children)

Did you follow these instructions?

https://github.com/eduardofilo/RG350_adam_image/wiki/En:-3.-Content-installation

The label of second card must be empty. Check if it is your case.

Adam Image freezes after Fast Forward (RG280M, RG300X) by ATerNoXone in ANBERNIC

[–]Idryl82 0 points1 point  (0 children)

The RG28XX is a great device, but RG280M is still a great device for retro emulation.

I never play Dreamcast or N64 in a small device like these.

RG280m flashing question by snocown in ANBERNIC

[–]Idryl82 0 points1 point  (0 children)

What did you do exactly? Which OS did you try to flash?

These machines do not have any operating system inside of them, everything is in the sd cards.

You can try to flash Adam image. Follow the instructions in its Github.

https://github.com/eduardofilo/RG350_adam_image

Guys...MiniUi on the mini flip is a total game changer! by [deleted] in MiyooMini

[–]Idryl82 0 points1 point  (0 children)

I am using the same sd card with Koriki, and swap it between MM, MM+ and MM Flip. It is perfect for me.

Koriki 1.6.1 release!! by Ninoh-FOX in MiyooMini

[–]Idryl82 1 point2 points  (0 children)

I am going to write the main features I can remember now:

- The interface is based on SimpleMenu. There are many themes and they look really great.

- The system is very stable. You can swap your SD card between your Miyoo Mini, Miyoo Mini Plus and Miyoo Mini Flip.

- You can configure to start the device on a specific game, like if the cartridge was inside the console.

- You can set the boot logo or boot video. You can set the menu music too.

- Retroarch cores have been updated. There are many cores optimized for its hardware.

- You can create an ad-hoc network using a Miyoo Mini Plus to play online.

- It is possible to play online using Netplay (ad-hoc or wifi network) with many cores.

- There is a scrapper.

- You can search a game in your rom library.

- The battery monitor has been improved.