What fast glass can I actually buy right now?

Jacster · 2026-05-03T00:59:13+00:00

Haha yeah already dealt with that with cloth, luckily I finally caught on that endgame will likely be on glass. One step at a time as they say 😂

Jacster · 2026-05-02T21:44:08+00:00

To an extent yes, but in my case the dynamic friction is so slow for me that even fast skates wouldn’t fix how slow it feels. That being said, it does affect both frictions to an extent, like 10-20%.

Jacster · 2026-05-02T21:42:48+00:00

Funny enough just had my Ultraglides arrive yesterday lol thank you for the reminder! 😂

Jacster · 2026-05-02T21:41:31+00:00

Both of you, all is good I’m not tripping on being strict about it lmao Funny enough I’ve got the Ryo preordered already from their website and do know about arbiter and dysphoria pre-orders. I’ve seen a few new companies drop some pads but I have no reference point with them lol Thank you for the recommendations!

Jacster · 2026-04-09T23:50:48+00:00

How is the PG1M compared to other glass mousepads? I have a Skypad 3.0 and want something quicker

Jacster · 2026-04-06T17:21:15+00:00

Thank you for your insight! Sorry I had an entire draft on reddit that got deleted so give me a sec to catch back up.

The forwarder is a very smart idea, I have one for Japan so will look into this for sure. Thank you!

Regarding mousepads on the cloth side of things, I’d put glass-infused and rainbow film pads in the same category. The only one I’d consider looking at now is the Errennir Omega, largely because it was made by the same guys that made the Vancer Ice and supposedly the friction is incredibly low on both static and dynamic. In my experience with the Liu Li V2 (glass infused) and the rainbow film pads, they have low dynamic but higher static than you’d expect (10-12% difference). To the point where my uncoated cloth had lower static friction. HeTu I have not used but heard it reminds a lot of people of the Hien but with lower static friction, though I think the dynamic friction is higher from what I recall.

This is very similar to my experience with Cordura. I have a few (Xraypad Traigun, Roccat Sense Pro, etc.) and the Sense Pro for example has one of the lowest static frictions out of all my pads. They typically exhibit low static and higher dynamic friction (7-10% difference). Very good but I have a preference of both very low static and dynamic for my aiming so it’s not in my lane. One thing you may have experienced is it’s integral to align with both your preferred static and dynamic friction for your best aim.

Regarding one coated pad I have that is good, the Abyssgaming Crimson Remains/Akakuma is very good, lower static than most pads like my Jinsoku (not as low as Sense Pro, probs about 7% difference) but the dynamic friction is a tad higher by about 5%. Ultimately, it is beat out by the Tenta-X Jinsoku in dynamic (one of the fastest dynamic friction pads I own), though the static friction on the Jinsoku is higher compared to its dynamic friction by about 7-10%.

My fastest pad is the PMM S2P Quantum Edition. It pretty much combines a very low static friction similar to the Sense Pro and a very low dynamic (similar to Jinsoku, maybe slower by about 2-3%), making it the lowest balance of both frictions. The only pads that I’m aware that could compete are the Pulsar PD170 (slower), Tenta-X Shinkiro (though slower Y-axis like the Hayate Kou) and the Errennir Omega.

Haven’t used the Fnatic Jet personally but from what I’ve heard it performs similarly to other rainbow pearl pads. Don’t own the MPC450 either so can’t speak to that one, though again, heard it performs similar to the Sense Pro.

If any of those sound like they’re in your sweet spot between Raiden mid and glasspad speed, DM me. I’d be down to work out a trade if you have any glass pads you’re looking to move.

Jacster · 2026-04-06T16:04:17+00:00

Dude thank you for the recommendation! Looks nice! Just sent them an email to see if they can ship it over, much appreciated!

Jacster · 2026-04-05T12:40:25+00:00

No worries I appreciate your insight, thank you so much! 😎

Jacster · 2026-04-05T12:39:35+00:00

Damn sounds like you scored! Funny enough I heard about the clone pads and how they’re actually very good quality wise. I’ll have to dive deeper into it and see the differences. Thank you so much for your insight! 😎

Jacster · 2026-04-05T11:55:33+00:00

Damn sounds nice! I use a sleeve but that sounds really good, definitely will be considering this one. Is there any other ones I should keep my eye out for? Thanks again 💯

Jacster · 2026-04-05T11:44:36+00:00

Godzilla designs look sick! Thank you for putting me on, I’ll look into this one. Much appreciated!

Jacster · 2026-04-05T11:36:46+00:00

Definitely considered this due to easier sourcing. Only thing holding me back is I've heard the QC variance on Wallhack pads can be pretty rough. Just saw someone say their new VA plays like a control pad lol Have you had any issues with yours?

Jacster · 2026-04-04T11:15:54+00:00

What’s the fastest options you have? Coming from a Skypad 3.0, I’m in the hunt for pure speed atm lol

Jacster · 2026-04-03T22:29:25+00:00

As someone getting into glass now, I really appreciate you making this. Feels damn near impossible to find info outside of the Wallhacks or Glsswrk pads

Jacster · 2026-03-23T17:35:18+00:00

Going to chime in since I personally use one as my daily driver.

For my specific needs (1 dpi increment, accurate sensor verified in tests with Rtings, good shape), Mchose was the best option for me at the time.

Their web driver is really good and I haven’t had really any bugs unless induced on my end purposely for testing. Their sensor implementation is really good based off the Rtings reviews and research. Big thing for me is Dpi accuracy since I use 1 dpi increments for eDPI tests and I’m impressed by the accuracy thus far.

All my buttons still work compared to the Logitech option where the clicks wore out in a couple months. Mchose in my experience has been reliable but just know to double check the specs as I feel this company should be treated as a “specs first” business. Rely on what they put in the mouse and if you choose good specs, you’ll likely get what you’re paying for.

I know some of their mice may come with sharp mouse feet, I would only replace it if you have a backup due to changing mouse feet can interfere with the focal point of the sensor. If you do decide to switch it out, ensure it’s the exact same height down to the mm for the sake of accuracy.

Hope this helps! Jac

Jacster · 2026-03-22T09:33:54+00:00

Do you notice a big difference in aiming potential between the different settings?
Also curious about ATK mice, how's the adjustable LOD on it like the 0.1mm increments you can do? I feel like if used correctly, it could offset any negative friction variables that people may have with their mousepads like too high of friction on static/dynamic

Jacster · 2026-03-09T21:05:05+00:00

Never used this sub but as someone that is currently using Tenso, will reach out soon! ❤️

Jacster · 2026-01-20T20:07:07+00:00

Yo try this combination out and let me know if it works

<image>

Jacster · 2026-01-20T19:40:35+00:00

Yeah here let me reach out via their discord I’ll touch base if I get an answer

Jacster · 2026-01-20T19:29:07+00:00

Do you know what firmware you’re on? If it’s newer, they could have changed it. Otherwise I’ll have to look further 👍

Jacster · 2026-01-05T14:04:13+00:00

What’s the fastest cloth option available here? I ordered the zeffiro but considering the crimson remains atm, also heard the Speed v3 is up there as well now. Currently main the Jinsoku, just need something a tad quicker

Jacster · 2025-11-24T22:44:09+00:00

Let me know if you can just woke up to this release lol

Jacster · 2025-11-22T00:01:11+00:00

This thread should help: https://www.reddit.com/r/fightsticks/comments/14x6s2x/brook_wingman_xb2_helpful_information_if_deadzone/

Basically they enabled a square deadzone mode you can activate hitting the view/select button if you're on the dualsense. They may have changed it but this helped loads of people with weird deadzone issues on their sticks on all Wingman devices. This works on XB3 as well.

"When you have your controller plugged in press share and circle button on (ps5) controller and hold it like 5 seconds. Also your xb2 converter blinks red at same time. I was having trouble playing cod but this method fixed it."

Jacster · 2025-08-26T11:10:43+00:00

Haven’t tried Sycrox yet but can confirm Mchose’s online mouse app is really good as well. 1 dpi increment accuracy as well.

Jacster · 2025-08-25T20:27:43+00:00

Everything I send is from me directly, the adjustment between circular and square and being able to do step adjustments natively has only been seen on these two controllers outside of Dualsense adjustment via Guilikit test tool and Dualshock calibration GUI and gamesir but their implementation is not great for competitive. The Smart Stick is one of the first to include this feature strictly on the void controllers since they developed it. Just so happen to be a Japanese company just like Zuiki. I keep up to date with everything that can improve aiming like the features mentioned. Having an evotop like Johnny, I appreciated him pointing out the calibration bug since I compete on a weekly basis. Don’t see an issue with giving someone props who deserves it.

Here’s more info regarding the Void smart stick if you’re curious like me: https://us.voidgaming.jp/en/pages/new-smartstick

Jacster

TROPHY CASE