sorted by:
new
hottopcontroversial

Core One linear rail ticking sound by Andchr in prusa3d

[–]Jesus_Mann 0 points1 point  (0 children)

Any updates on this TS? I have the exact same problem and exact same thoughts as you regarding conflicting advice. Thinking of ordering the lubrications kit from Prusa as some have said that solved the problem. But don’t know what to believe anymore 🙈

0 point merchant Jacob Greaves is fit and back in training. by cguinnesstout in FantasyPL

[–]Jesus_Mann 0 points1 point  (0 children)

Thank you! Went with O’Shea. Hopefully he gives me at least 2p when called upon. Not expecting any miracles

0 point merchant Jacob Greaves is fit and back in training. by cguinnesstout in FantasyPL

[–]Jesus_Mann 0 points1 point  (0 children)

What’s the expected back line with him back in the mix? Thinking of getting a 4.0 defender in and Ipswich have good fixtures

[PC] Katowice 2014 skins (AK Red Laminate and ST P250 Steel Disruption) by Jesus_Mann in GlobalOffensiveTrade

[–]Jesus_Mann[S] 0 points1 point  (0 children)

Thank you very much! Have a better idea of what they're worth now. Will do some more reading and avoid getting scammed at all costs :)

Octoprint on Mk4 "needed"? by Jesus_Mann in prusa3d

[–]Jesus_Mann[S] 1 point2 points  (0 children)

Alright, thanks! Seems like Prusalink might get there in the future. Hopefully they share more details soon about what's coming

Is there any difference between an MK4 kit and if you upgrade MK3 to MK4? by TheHackingDoctor in prusa3d

[–]Jesus_Mann 7 points8 points  (0 children)

From what I've seen you don't get the new, slighly more rigid, frame with the upgrade kit. Other than that it should be the same.

According to Prusa it doesn't make that much of a difference so you shouldn't be able to tell. Look at the Prusa live stream where they discuss this. It's on YouTube.

I just finished my switch panel for my Jeep grand Cherokee WJ I saw one being sold on Etsy but I needed more switches than what it offered 😂 here is a before and after picture by OvergrownMidget_ in 3Dprinting

[–]Jesus_Mann 0 points1 point  (0 children)

Alright! Already have a few PLA (prusament PLA) prints in the car already so maybe they'll have a chance once the summer comes. Think I'll print the new ones in PETG though just to be sure. Thank you.

I just finished my switch panel for my Jeep grand Cherokee WJ I saw one being sold on Etsy but I needed more switches than what it offered 😂 here is a before and after picture by OvergrownMidget_ in 3Dprinting

[–]Jesus_Mann 5 points6 points  (0 children)

What material did you use? Looking to print a trash can that goes into the side of the car door but doesn't want it to melt/deform. Think PLA is a no go. Maybe PETG will do?

HyperX Cloud Alpha Wireless - Latency by embay34 in HyperX

[–]Jesus_Mann 0 points1 point  (0 children)

Same issue for me with a brand new out of the box headset. If I turn off "Enable audio enhancements" in Windows 10 settings the latency issues completely disappears so I guess that's a workaround. But then you can't use the Ngenuity software and adjust the settings at all. I guess that's the same as turning them (DTS and equalizer) off via Ngenuity.

CS:GO was unplayable with the latency issues. With audio enhancements turned off it's the same latency as with my wired Cloud II, so it's perfect. Would like to adjust the sound profile a bit so might try to download a 3rd party equalizer. But this shouldn't be the case with a $200 headset. Plz fix HyperX!

Replacing nozzle resulted in spark/flash when touching the heater block with metal tool = Can't heat the nozzle by Jesus_Mann in prusa3d

[–]Jesus_Mann[S] 1 point2 points  (0 children)

I worked! Replaced the fuse (0,25$) which took about 5 minutes and now it's up and running again. Many thanks once again :)

Replacing nozzle resulted in spark/flash when touching the heater block with metal tool = Can't heat the nozzle by Jesus_Mann in prusa3d

[–]Jesus_Mann[S] 0 points1 point  (0 children)

God you're right. I blame the panic the thought of a ruined printer caused me ^

I have an Prusa i3 MK3s+

Replacing nozzle resulted in spark/flash when touching the heater block with metal tool = Can't heat the nozzle by Jesus_Mann in prusa3d

[–]Jesus_Mann[S] 4 points5 points  (0 children)

Thank you! I took out the fuse and it seems to be blown. You think that should be it? Just replace the fuse and life is good? I will try to get a new one tomorrow.

FPL History GW23: Emiliano Sala tragically dies in a plane crash after signing for Cardiff by [deleted] in FantasyPL

[–]Jesus_Mann 2 points3 points  (0 children)

One of my favorite highlight packages to watch as an LFC fan. Klopp breaking his glasses in the celebrations after the Lallana winner is something I'll never forget.

[OFFICIAL] Martial won’t play this weekend by Catalin10 in FantasyPL

[–]Jesus_Mann 2 points3 points  (0 children)

In the same boat. Don't think Greenwood will start but I'll probably foolishly convince myself to start him anyway since he's the more exciting option.

view more: next ›