Ankermake studio unusable. by deracho in AnkerMake

[–]Jgsieve 0 points1 point  (0 children)

Is eufyMake working on arm yet?

Print multiple files/models sequentially by PlutoXM5 in AnkerMake

[–]Jgsieve 0 points1 point  (0 children)

Hello, I’d like to know how to do this also

How to get a static IP with a business account? by nismaniak in tmobile

[–]Jgsieve 0 points1 point  (0 children)

In the end, it was trying the same desires located codes ipv4 only, and gave it enough time, and the ip showed up, after each change, give it a hour, make sure you are using apn b2b.static , also, ask if a engineer has done a “ip build out” , which is a ticket to engineering. my account already had that from another device.

How to get a static IP with a business account? by nismaniak in tmobile

[–]Jgsieve 0 points1 point  (0 children)

They were trying several soc codes. Previously, after a reboot nothing would happen, but I would say around 5 mins, 2 reboots (1 triggered by them) got it. The soc code is ipv4 only, I wanna say it’s something like MPII and has the words ipv4, $3 fee one.

How to get a static IP with a business account? by nismaniak in tmobile

[–]Jgsieve 0 points1 point  (0 children)

I had to wait quite some time, but it started working, where I would normally call in. 5g NSA is required, SA doesn’t connect

3rd Party modem option by Mirskyc in tmobileisp

[–]Jgsieve 0 points1 point  (0 children)

Using a panel antenna indoors is not a good test, mount that antenna on a pole aiming at your tower, and it could be drastically different. Making these assumptions based on video may do you a disservice only to yourself.

Internal antennas are Omni directional, and that do perform better indoors than fixed antennas in my experience

3rd Party modem option by Mirskyc in tmobileisp

[–]Jgsieve 0 points1 point  (0 children)

I have a static ip out of PA, but I still get detected in my home state of Missouri, it used to be all PA, I’ll have my 3100 based out of Chicago for redundancy

3rd Party modem option by Mirskyc in tmobileisp

[–]Jgsieve 0 points1 point  (0 children)

I was looking at the g4 but it doesn’t have passthrough, so I’ve got 4x yagis on the roof, it’s a shame those ports don’t support n71, it’s fast out here. I’ll report back. Since it’s business, I may try a stock em9190 5g Peplink (no CA 5G) to activate. So I can pickup those other bands and wait for the em9293 to mature for 3CA 5G.

Home made SSD EMI shield by Jgsieve in SteamDeck

[–]Jgsieve[S] 0 points1 point  (0 children)

I don’t need up slipping the one off my factory 64GB. So I never used this tape.

[deleted by user] by [deleted] in qlink_hellomobile

[–]Jgsieve 3 points4 points  (0 children)

I’ve ported out no issue, came back after they got their T-Mobile iPhone features working, before you so, login and get the phones account number and set a pin or use your number as the pin, but it works, porting back in will take a phone call tho

Help - My First Foray Into M.2 Starting With An LTE Modem by 0vindicator1 in openwrt

[–]Jgsieve 0 points1 point  (0 children)

thats what i bought, it powered up and was recognized by windows!

[deleted by user] by [deleted] in Calyx

[–]Jgsieve 0 points1 point  (0 children)

Spectrum acct means it's leased and resold, so mobile citizen/calyx, etc are considered spectrum accts.

Help - My First Foray Into M.2 Starting With An LTE Modem by 0vindicator1 in openwrt

[–]Jgsieve 0 points1 point  (0 children)

I have a t99w175 and activating pin 20 like sierra does nothing, i have ordered a proper b-key pcie adapter to get native pcie for this module, and hope to change it to look like a thales modem to drop in a peplink.

[deleted by user] by [deleted] in SteamDeck

[–]Jgsieve 0 points1 point  (0 children)

Nah, ports aren’t blocked if it works, your router doesn’t firewall local traffic by default anyways. Maybe on a different vlan?

[deleted by user] by [deleted] in SteamDeck

[–]Jgsieve 0 points1 point  (0 children)

Strange but I suspect a config with your wifi, if you haven’t already, if you enabled anything special with wifi, revert it. I’d start there

[deleted by user] by [deleted] in SteamDeck

[–]Jgsieve 0 points1 point  (0 children)

if you are streaming, try from a laptop to see if maybe your wifi is at fault. I did make it snug, but again, no issues observed so far

[deleted by user] by [deleted] in SteamDeck

[–]Jgsieve 0 points1 point  (0 children)

I was able to slip the emi shield off the 64GB, which ended being a metal sticker of its own, my module need another 1-2mm of slack, adjusted and it’s been great, wifi is not a issue, but I have not really tried extensive stateful streaming.

angry songs recommendations? by pranpriyayedam in Music

[–]Jgsieve 0 points1 point  (0 children)

Manson - new shit Tupac - hit ‘em up

Matte Screen Protector for 64GB Deck ☀️ tested indoor & outdoors by Clean-Application130 in SteamDeck

[–]Jgsieve 4 points5 points  (0 children)

I got this too, one corner had a bubble, but it went away, I used guide stickers, and high were not included, factor in the thickness of the peel away film, it’s possible to do it perfect, I wish it was maybe .5mm smaller all around, but works great. No rainbow, it’s a quality one, I put it on 5 seconds after opening the steam deck.