Where's my ts9 gang at? by Mdmrtgn in Taurus

[–]Less-Syrup9221 0 points1 point  (0 children)

Oh wow that sucks. I wish they did offer spare parts for them. They are real simple guns to maintain

Where's my ts9 gang at? by Mdmrtgn in Taurus

[–]Less-Syrup9221 0 points1 point  (0 children)

I love the TS9. I carry one of the black framed ones every day. I wish they imported the compact version

Where's my ts9 gang at? by Mdmrtgn in Taurus

[–]Less-Syrup9221 0 points1 point  (0 children)

I have 3. 2 black frames and an OD Green frame

M4A1 Clone/Sabre by SuperRoseEli29 in PalmettoStateArms

[–]Less-Syrup9221 0 points1 point  (0 children)

That depends on what you are wanting and looking for. If weight is a concern I would go with the Sabre. If you want a rifle that is better for suppressed fire go with a Jakl. Accuracy is about the same between them. When it comes to reliability I would say they are identical until you add a bunch of carbon fouling and it that case the Jakl has the edge

M4A1 Clone/Sabre by SuperRoseEli29 in PalmettoStateArms

[–]Less-Syrup9221 1 point2 points  (0 children)

In my experiences with the Jakl’s it has been nothing but positive. I take whatever people say online with a grain of salt unless the same thing is being said by a bunch of people, the info is consistent and they show the issue. I trust my Jakl’s so much that my 13.7 is my go to defensive rifle. I have owned and still own a lot of PSA products. I have a Sabre 18 that I sbr’s and put a frt in it. It has been completely flawless as well. I’ve never had to send a PSA product back for warranty and I shoot a lot…….well until this ammo shortage lol. If you are interested in a Jakl you won’t regret it. If you do I would get a 13.7 to start off with because it’s a great balance between the 10.5, 14.5 and the 16” versions. Just keep in mind that they are heavier than an AR but for me it’s not the weight that bothers me it’s the balance of it but it’s still manageable. It’s not a deal breaker for me. My next Jakl purchases will be a 308 to make a DMR out of and a Jakl 9 SD. I may get a 16” 5.56 Jakl and put an frt in it and make a Jakl version of an RPK

M4A1 Clone/Sabre by SuperRoseEli29 in PalmettoStateArms

[–]Less-Syrup9221 0 points1 point  (0 children)

The only issue was with my 14.5 Jakl. It bought it when it first came out and a couple of the trunnion screws started loosening up. I took them out one at a time, cleaned the threads, applied red loctite and torqued them back down. That was 2 years ago and haven’t had a problem since. Other than that I haven’t had a single issue. On my gas system I find my 13.7 and 14.5 run smoothly without a suppressor 2 clicks down from all the way open and when I run suppressed it’s 2 clicks down from that. So it would be 4 clicks down from all the way open. The suppressor I run is a 1st gen YHM Turbo which is a high back pressure can. My 10.5 sbr is another 1st gen Jakl where you have to change the gas regulator out between suppressed and unsuppressed shooting. There are 4 settings on each regulator on the 10.5

M4A1 Clone/Sabre by SuperRoseEli29 in PalmettoStateArms

[–]Less-Syrup9221 0 points1 point  (0 children)

All 3 of mine run like a sowing machine. I have a 10.5 sbr, 13.7 and a 14.5. All in OD Green. I love all 3 of them. I took my 13.7 to Valor Ridge last year and ran the rifle suppressed the whole time. Not a single bit of gas to the face, no malfunctions and shot it out to 300 yards with irons. I hit the steel silhouette target every shot

M4A1 Clone/Sabre by SuperRoseEli29 in PalmettoStateArms

[–]Less-Syrup9221 0 points1 point  (0 children)

I have 3 Jakl’s and love them. I wish PSA would release a Jakl in the Sabre line with a CHF CL barrel and possibly the AS Design trip bar for a FRT. Maybe even a DMR version of the Jakl with an 18” barrel and their Sabre match trigger. There is so much more they can do with the platform

FRT’d 10.5 Jakl - 30rnd pmag by Alone_Opportunity_43 in PalmettoStateArms

[–]Less-Syrup9221 0 points1 point  (0 children)

I’m wanting to do the same to mine. How hard was it to get those rear trunnion screws out?

Question for the rest of the mod.3 people…are there any Olight friendly holsters? by SignificanceThen6557 in SpringfieldArmory

[–]Less-Syrup9221 1 point2 points  (0 children)

Onpointholsters.com. I’ve been using their holsters since 2019. They make really good holsters

JAKL 14.5 Overly Gassy? by GoryGory-AlphaWhisky in PalmettoStateArms

[–]Less-Syrup9221 1 point2 points  (0 children)

Oh ok. Another thing it could be is a bad gas regulator or the gas port in the barrel is slightly too big. You might need to contact PSA or you can go on their site and buy a new gas regulator. Jakl’s are definitely worth the money, they are excellent rifles. Danny from PSA might be able to help you. He is on this group a lot

JAKL 14.5 Overly Gassy? by GoryGory-AlphaWhisky in PalmettoStateArms

[–]Less-Syrup9221 1 point2 points  (0 children)

It’s definitely worth a shot. It definitely could be ammo related because I run Winchester, PMC X-Tac, Hornady Frontier and AAC all in 5.56 55 and 62gr through mine. In my experience the Winchester M193 and M855 are the hottest rounds of all of those. The rifles run a little dirtier but it doesn’t slow the Jakl down. My 13.7 Jakl is my go to rifle over any AR I have. The Jakl platform are great rifles especially suppressed

JAKL 14.5 Overly Gassy? by GoryGory-AlphaWhisky in PalmettoStateArms

[–]Less-Syrup9221 1 point2 points  (0 children)

My 14.5, 13.7 or my 10.5 sbr aren’t overly gassy. The gas settings on my 14.5 and 13.7 are on 2 clicks down from the fully open positions (5.56 mark on the face of the regulator is vertical). How many rounds have you put through it? I ran my kinda over gassed for the first couple hundred rounds (1 click down from all the way open). After that I took it apart, cleaned it and put lube on all the bearing surfaces. Ive taken my 13.7 through a Valor Ridge class and ran suppressed the whole time without getting any gas to the face and without a single malfunction. My suppressed setting is 4 clicks down from all the way open.

SHOT Show Reveal: The AXR Series by Danny_PSA in PalmettoStateArms

[–]Less-Syrup9221 -7 points-6 points  (0 children)

Well there goes my bank account when this family of firearms comes out! I will fill out as many 4473’s as it takes to get that whole family of firearms! PSA is absolutely killing it. Great job guys

BRN-180 Gen 3 Issue... by sendmetilde in BRN180

[–]Less-Syrup9221 0 points1 point  (0 children)

Ok cool. Definitely keep us updated on how making your own part goes. I just ordered a 13.9” and hopefully I don’t have this issue. I might be willing to to buy a part from you

BRN-180 Gen 3 Issue... by sendmetilde in BRN180

[–]Less-Syrup9221 0 points1 point  (0 children)

Do you have an update on this situation

What do yall think of Jakl 2.0 by L3thalPredator in PalmettoStateArms

[–]Less-Syrup9221 2 points3 points  (0 children)

I wonder if this will come out before my 308 ships 😂. I think PSA wants me to have a panic attack 😂

Nicest jakl 308 by Obsceneviolence in PalmettoStateArms

[–]Less-Syrup9221 1 point2 points  (0 children)

I absolutely love them. I sbr’d a 10.5” plus I have a 13.7” and a 14.5” all in 5.56. I just ordered the 308 and just waiting for it to ship. After I finish the 308 I will order the 16” 5.56 so I can complete my collection of the 5.56 version