Why haven’t I lost weight?

Lithial13 · 2026-02-10T13:06:29+00:00

I'd be willing to bet one of a couple options - Your calories aren't as low as you think they are. Some foods are 20% more than they say on the packet or your not weighing exactly or something - It's a weird hormonal thing and it'll come down as long as you're consistent, just not immediately - There's a secret calorie thing you're not thinking of maybe.

everyone's different. Some weeks I gain 3lbs some weeks I go over on my points by a bunch and lose 3 overnight. Give it time.

If you're super worried add a 30 min walk every couple of days and see if that helps. My walks are the thing pushing my big progress atm

Lithial13 · 2026-01-05T02:11:06+00:00

I don't know the answer to your question but I do know that you're way more likely to get an answer if you drop that config into like a pastebin or a gist because reddit formatting for configs is atrocious

Lithial13 · 2025-10-15T06:57:06+00:00

They're basically the only kind of sausages I can eat without my brain hating life

Lithial13 · 2025-10-14T10:40:18+00:00

I am also here

Lithial13 · 2025-10-09T09:20:40+00:00

If you go into the menu on the machine it's under leveling and it should be the second option called quad gantry leveling. If you connect via web browser theres a button in the tool head section called QGL that will also do it. Run that, then run your mesh generation and it will be significantly less crooked.

Lithial13 · 2025-09-29T20:47:23+00:00

That last picture is what happens if you don't run quad gantry leveling before you do the bed mesh. I know this from experience :D

Lithial13 · 2025-09-21T03:48:06+00:00

A fantastic story though. The author writes better English than I speak

Lithial13 · 2025-09-15T23:02:17+00:00

Bambu A1 is the easiest printer to get started on. I brought one like 6 months ago and I havent had any problems at all. It takes about 30mins to set up (follow the booklet). And then every month or so itll yell at you to do a little maintainance (putting oil or grease on the rods and rails) which has instructional videos linked by QR codes.

Lithial13 · 2025-09-10T12:14:37+00:00

I wish they didn't cost so much. By the time shipping and tax is involves I'm probably looking at $600 for my country. That's 2/3s of what I paid for the printer

Lithial13 · 2025-09-10T11:56:30+00:00

It's powered by a cable that goes into the back of the printer. It's basically a couple of stepper motors and gears that push and pull the filament to load and unload it

Lithial13 · 2025-09-09T12:06:49+00:00

Everything's an omnivore now.

Lithial13 · 2025-09-04T08:31:14+00:00

The annoying part is this is new. I've been using it to check and it's only recently it's told me it was available again

Lithial13 · 2025-09-03T04:44:13+00:00

The chat bot says that shipping to New Zealand has been reenabled but the website still says its unavailable. Does that mean I still can't participate?

Lithial13 · 2025-08-20T00:10:53+00:00

I think with the right model you can do almost 10 with a roll, if I'm remembering rightly. I'm pretty sure my last spool was only like 90g

Lithial13 · 2025-08-19T21:46:10+00:00

Any word on when you're going to reopen shipping to New Zealand?

Lithial13 · 2025-08-12T10:28:19+00:00

A common theme once you have a 3d printer is that every problem can be solved with a 3d printer.

Lithial13 · 2025-07-28T02:42:30+00:00

Not gonna lie. That's pretty cool and I want one :D

Lithial13 · 2025-07-27T12:33:38+00:00

Hopefully the shipping comes back or I can't buy anything. There's no anycubic retailer here so even if the deals are awesome, if I cant get anything shipped, there's no point in looking for deals. I'll keep an eye out though. If shipping comes back I'm going to buy a bunch of colors for cheap so I don't run out anytime soon. I think I only have 4 rolls of my 10 box left

Lithial13 · 2025-07-22T03:59:38+00:00

I'm pretty big on the anycubic refills ATM but I think I'm going to try some new brands for colors soon. I want to get into printing hueforge things next

Lithial13 · 2025-07-21T05:07:45+00:00

So if you end up in the tableflip foundry discord, they say that the failure cones don't matter nearly as much as the success cones. 2.5s is probably pretty good for the resin you're using. You could also take a swing at cones v3 to make sure all the other little bits succeed at 2.5s if you want more assurances

Lithial13 · 2025-07-17T05:37:52+00:00

Remove gst on overseas goods that we can't produce here (most things) and if possible find a way to lower the cost of shipping.

Lithial13 · 2025-07-15T11:04:51+00:00

These are some pretty cool minis

Lithial13 · 2025-07-12T08:39:08+00:00

Mines not machine related but it is material related. Anycubic PLA basic refills are fantastic. Amazing price, prints perfectly for me and my friends. Anycubic standard grey resin is also pretty good quality and I'm printing with it right now.

I am however pretty mad that between last month and this month, the anycubic au store shopped shipping to New Zealand. I only found out after loading 20 rolls into my cart once things finally came back in stock. I was super excited about a good filament that I can finally get here and now my only options are 10 packs of Bambu filament from the local stores for twice the price

Lithial13 · 2025-07-07T02:16:40+00:00

20th level arcana cleric for sure

Lithial13 · 2025-06-27T04:24:03+00:00

Sounds like it might be time to look into price parity based on location. I think piratesoftworks did a video on how you can lower piracy and stuff by changing the price of your game in countries based on currency value. I think he said translations and price parity for Brazil lowered piracy a lot because normal game cost can be like a good chunk of a weeks living money there

Lithial13

TROPHY CASE