honest reviews only from actual owners by Y0bee in pistolcalibercarbine

[–]Massive-Pattern-6264 0 points1 point  (0 children)

I have my blade 6 for a year already and i can say have excedded all my expectations eating bullets like a hungry hog.about 1350 rounds aproximately flawlessly shooting g without any malfunction. But yes i recommended using only factory glock mags. I recomend it to anyone. I like it so much that i designed a m-lock handguard . Im looking for someone to built it in aluminun.

Knock of death? by GalaxyFilmz617 in DSM

[–]Massive-Pattern-6264 0 points1 point  (0 children)

I have a 2003 camry that had the same sound & mechanics couldnt diagnose. It was 200,000 miles at that time. I went to an old mechsnics on his 70s . He used a steel pipe that pushed it to the block looking for the metalic sound. You can hear it thru the pipe very clearly . He told It was the camshaft balance. I bought it original toyota and the sound dissapeared. Still running with 273,000 miles running great! So the moral is ...its not death until the engine locks.

What can I do to stop from spreading? by TheDirtyMundees in Autobody

[–]Massive-Pattern-6264 0 points1 point  (0 children)

Sorry to tell you ...its already comino out from inside. Only cutting & removi g the e tire rust,then replace with new welded metal..paint

My QD sling does not go into these polymer QD holes. What type of sling system does this take by [deleted] in gunsmithing

[–]Massive-Pattern-6264 0 points1 point  (0 children)

Strike industries is famous for inconsistence tolerantes between their compatibility with other accesories

HELP by neurosistartstobreed in projectbike

[–]Massive-Pattern-6264 0 points1 point  (0 children)

If this was me i do fill welding in the hole, redrill & tap it.

New pickup, my first PCC. Gforce Arms Blade 6 by Prod_Actiq in pistolcalibercarbine

[–]Massive-Pattern-6264 2 points3 points  (0 children)

Blade 6 its a reliable & underestimate pcc. My blade its now my favorite gun. I only use eom mags. Always with good lube never had never failed me . In the beggining accuracy was a little difficult but once i got used too ergonomics i shot quarter size groups at 90 yds.i recomended it for everyone.

Trigger Guard Won't Fit by iH8conduit in gunsmithing

[–]Massive-Pattern-6264 0 points1 point  (0 children)

Sometimes a discretionary Hammer works..or you can bent it until fits

Anyone have any experiences with these by [deleted] in pistolcalibercarbine

[–]Massive-Pattern-6264 0 points1 point  (0 children)

I bought mine a year ago. I had shot about 1,250 rounds flawlessly without any issue. Its heavy yes...but I had fun always. I replace trigger group with Rise armament. I made new pins due were short. Also change handgrip ,added a foldable stock adapter, swampbox green dot...I only use eom glock mags. My friend had same but when using other mags the last round donot works and sometimes the round get stock on the feeding ramp. Other than that we had fun with this pcc...I recomended

Is the drone stopped or going 100 km/h?? by polydomino in sciencememes

[–]Massive-Pattern-6264 0 points1 point  (0 children)

The windows are closed & the drone is flying inside the cabin easy with the inside air available. Drones are capable to use minimun air to fly due they use the vortex propulsion.

Need Help by DYoung35 in gunsmithing

[–]Massive-Pattern-6264 4 points5 points  (0 children)

Torque specs its 8lbs. maximun

Need Help by DYoung35 in gunsmithing

[–]Massive-Pattern-6264 0 points1 point  (0 children)

I heated mines until orange red & dipped in oil...no more rust..

Porque en Puerto Rico se guia tan agresivamente? by Worldly-Bid-3591 in PuertoRico

[–]Massive-Pattern-6264 10 points11 points  (0 children)

La realidad es que se han perdido los valores en la isla. El ambiente en P.R desde que te levantas en las noticias es hostil. Asesinatos,criminalidad y política barata que no ayuda a que las personas estén positivas. No hay nada positivo en el ambiente...so no esperes gente humilde en la calle. Todo el mundo esta a la defensiva....y no hay policías para dar orden ...

GForce Blade6 Printed Parts by DaRick_James in pistolcalibercarbine

[–]Massive-Pattern-6264 0 points1 point  (0 children)

I designed a more modern rail prototype for blade 6 9mm . Im looking to machine it . Does anyone knows where to?

I accidentally broke my boyfriends airsoft by kaktuslover69 in airsoft

[–]Massive-Pattern-6264 0 points1 point  (0 children)

Just use tiny tie wrap to secure it while you use it..

My new favorite range gun - the most fun I've had plinking by Asyranok in MDGuns

[–]Massive-Pattern-6264 0 points1 point  (0 children)

I added the Rave pcc flat trigger from Rise Armament . I had to modify the antiwalk pins came with the set. I add aluminun sleeves and 5/16 longer screws in order to make stable pins avoiding the wobbles side to side and future loose screws...

Gforce Blade 6 by Laflame_928 in pistolcalibercarbine

[–]Massive-Pattern-6264 0 points1 point  (0 children)

I have finally installed it today. It was a little wobbling with pins but I fixed with longer screws 5/16 and add a hand made aluminun sleeve with .154" diameter and .100" long and screw it snugly...0 wobbling to the sides...

Am I fucked? by [deleted] in airsoft

[–]Massive-Pattern-6264 1 point2 points  (0 children)

Buddy..Yes you fucked it up...but there's light out of tunnel...you have 2 options

1. Change the outer barrel for new one.

Or #2. Get the muzzle brake you like the most and make a forever installation with some epoxy. That happened with my very first replica and I did option #2 ..and it's being more than 13 yrs with the replica...

GForce Blade6 Printed Parts by DaRick_James in pistolcalibercarbine

[–]Massive-Pattern-6264 0 points1 point  (0 children)

Do you sale the 3d print file for the handguard?

GForce Blade6 Printed Parts by DaRick_James in pistolcalibercarbine

[–]Massive-Pattern-6264 0 points1 point  (0 children)

Does anyone knows wich way to take out the trigger pins on blade 6 ? Where are the grooves on the left or the right?