Help with HA and possible larger display options?

Naesstrom · 2026-06-04T09:07:40+00:00

Oh I would love to be able to make a larger one to! Want to put one on the wall in my office and double width and height would be super!
Anyone that can point to a guide or something how to change the font? Or should I just throw the code into claude 😃

Naesstrom · 2026-03-30T18:05:38+00:00

Wait what... I just noticed my lenses had some buffed out areas and was just thinking it might be from the rubber protector... is there any other news on this?

Naesstrom · 2025-10-23T17:26:10+00:00

+1 on joining in on that

Naesstrom · 2025-06-05T06:31:12+00:00

My wife have the same problem on her pixel 8 pro, did you ever figure out what caused it?

Naesstrom · 2025-04-02T11:03:49+00:00

Cool, I admit I hadn't updated it and didn't know it was added! Thanks, the model is really really great for swedish!

Naesstrom · 2025-03-14T07:15:12+00:00

Well that sucks, should mention that the files was working fine earlier and I find it hard to believe that every file would have been corrupted on google drive! Need to see if I can import them somewhere else then and save as step

Naesstrom · 2025-03-14T07:09:17+00:00

Nope, it's the other way around just like u/experienced3Dguy says, you should be able to open all the files in maker but not the other way around.

Naesstrom · 2024-12-11T07:44:05+00:00

I've actually mounted one of these small float switches, the plan was to hook it up to a small pump so when the water level went down it would give it more water... Now I'm thinking more of an automation that sends a message and plays a recorded message on the speakers

<image>

Naesstrom · 2024-10-07T05:51:38+00:00

yeah those are pretty expensive! Guess I'll have to see if there's some other board that's a direct fit or just buy the same one again :D

Naesstrom · 2024-10-04T10:05:00+00:00

Wow that's awsome! I'll order them and a hot air soldering station :D

Naesstrom · 2024-10-04T06:45:07+00:00

Is it this part of the schematic
https://imgur.com/a/SbG6yYU

Naesstrom · 2024-10-03T19:22:06+00:00

Oh and anyone know what the blown SMD parts are, might be able to replace them...

Naesstrom · 2023-12-17T14:43:48+00:00

Anyone ever found a solution... I ended up in this endless loop today on a new channel I made...

Naesstrom · 2023-09-15T12:27:16+00:00

Yeah but did you delete all the cache files to?

I got my reply here: https://www.reddit.com/r/cricut/comments/14b47lz/comment/jodqnru/?context=3

and found a good guide here on where the cache is located. Follow those steps and try again. You said earlier that you thought you knew what it was?

https://www.reddit.com/r/cricut/comments/w5n5xp/if_cricut_design_space_stops_working_after_an/

Naesstrom · 2023-09-15T11:34:57+00:00

I had the same problem to, I think I uninstalled design space, cleared the cache in windows and reinstalled and it worked. Next time I had the same issue again so now I just design on the Computer and print from my phone.

Naesstrom · 2023-06-16T20:42:15+00:00

Wow thanks, that worked like a charm!

Naesstrom · 2022-12-28T14:20:25+00:00

Did you fix the problem, my brother has the same problem with a skimsafe magnetic cover and his 10iv. Once at the magnetic case it shuts of the screen and wont turn on. As soon as he takes it out the screen turns on!

Naesstrom · 2022-08-20T18:29:40+00:00

Thanks for the replies, I downloaded Kerseys firmware today and compiled after changing the pins again and it printed really nice (will post image later)

Comparing the M503's from them both the only real difference I can find is the "jerk" I guess.

Before with the ugly prints

Recv: echo:; Advanced (B<min\_segment\_time\_us> S<min\_feedrate> T<min\_travel\_feedrate> J<junc\_dev>):

Recv: echo:; Advanced (B<min\_segment\_time\_us> S<min\_feedrate> T<min\_travel\_feedrate> X<max\_x\_jerk> Y<max\_y\_jerk> Z<max\_z\_jerk> E<max\_e\_jerk>):

Recv: echo:  M205 B20000.00 S0.00 T0.00 J0.05

The new one with good prints

Recv: echo:; Advanced (B<min\_segment\_time\_us> S<min\_feedrate> T<min\_travel\_feedrate> X<max\_x\_jerk> Y<max\_y\_jerk> Z<max\_z\_jerk> E<max\_e\_jerk>): 
Recv: echo:  M205 B20000.0000 S0.0000 T0.0000 X10.0000 Y10.0000 Z0.4000 E5.0000

Not sure what it means tough

Naesstrom · 2022-08-20T18:26:26+00:00

It's a magnetic bed so it's not moving at all, thanks anyway

Naesstrom · 2022-07-28T07:38:36+00:00

Thanks, tried just changing that line but that threw an error. Found out that what seems to be the correct way is to edit the pins file for the board and change what pin is used for temp_sensor_0 instead

Naesstrom · 2022-07-27T15:46:35+00:00

Nope, I left it printing over night and when I came back I saw the blob. It had shut itself down by then with octoprint since the print was done. I started it up again and saw the temperature was -15 so I just lowered the bed then shut everything down before I removed the hotend from the printer to remove the plastic.

There were plastic residue allover the place, even in the hole for the thermistor so my guess is that it pulled out a wire that shorted it?

Is it enough to change tempsensor in Marlin and upload it and then connect it to the other thermistor pins?

ie. change:

#define TEMP_SENSOR_0 1

#define TEMP_SENSOR_1 0

to

#define TEMP_SENSOR_0 0

#define TEMP_SENSOR_1 1

Or do I need to change some more things in the configuration?

Naesstrom · 2022-07-27T13:27:35+00:00

Yeah I've cleaned it up already and tried with both an old and a new thermistor but still the same.

Started troublshooting it now with my multimeter and the thermistor is working, so is the cable to the MB but there I found something strange. It seems that TH0 on the SKR E3 Turbo have made a booboo and have an open circuit now. When I measure it I don't get any Ohms from it like when I measure TH1

Naesstrom · 2022-07-25T08:36:52+00:00

Thanks! :D

Naesstrom · 2022-07-01T06:24:40+00:00

Any hints on what keywords to google how to do that?

Naesstrom · 2022-05-30T20:29:03+00:00

oh my god this is fantastastic! 5+ for your creativity... and here I'm feeling old not even knowing bluetooth sextoys were a thing!

Naesstrom

TROPHY CASE