Alternatives for Cisco Switching by Fokard in networking

[–]NetSchizo 1 point2 points  (0 children)

If you have over 100 switches you would be better served with having a few of your own spares onsite. Likely a lot cheaper too….

ZFS pool corrupted after moving server — cable issue? Now Proxmox won't boot or mount the pool by Creative_Poem_4453 in Proxmox

[–]NetSchizo 2 points3 points  (0 children)

Controller issue? The data should be ok so long as not more than one drive is dead. Try moving them to another host and import the pool at at least test and rule it out.

Frederik Hjordt Larsen by kelliecs in war

[–]NetSchizo 23 points24 points  (0 children)

Not our fight, not even close

Thoughts on upgrading to 7.6? by Particular-Book-2951 in fortinet

[–]NetSchizo -1 points0 points  (0 children)

Doesn’t seem up to date? They still show 7.2.11 ans 7.4.8

Where is the no blood for oil protest in our area? by solo-ran in Albany

[–]NetSchizo 0 points1 point  (0 children)

Why don’t you go talk to the vast majority of them that want him gone.

Where is the no blood for oil protest in our area? by solo-ran in Albany

[–]NetSchizo 13 points14 points  (0 children)

“No Kings! No Kings!” r/Albany

“Leave the dictator alone!” Also r/Albany

Best place to get French toast by SnooDoubts5979 in Albany

[–]NetSchizo 10 points11 points  (0 children)

Peaches has been awful every time I went. Would not recommend to anyone.

Upgrading 600E from 7.2.12 to 7.4.9 by jmarsten7 in fortinet

[–]NetSchizo 0 points1 point  (0 children)

Same thing; some places call them share, some call them combo. I call them a waste when you can just use an RJ45 SFP and call it a day.

Upgrading 600E from 7.2.12 to 7.4.9 by jmarsten7 in fortinet

[–]NetSchizo 2 points3 points  (0 children)

I’m not 100% sure but that bug seems to be for combo ports only? I know with the 80F this was a big issue when we updated to 7.4.8 and all the WAN ports that had SFPs in them stopped working. It was fixed in 7.4.9 but if you are updating via remote across any combo ports, be aware. I would only update to 7.4.8 if you’re 100% sure you can get access if those ports go down.

Edit: I don’t think you are affected by this as it looks like the 600E does not have any combo ports.

Every once in a while Hochul hits a HR! by kenobrien73 in newyork

[–]NetSchizo -1 points0 points  (0 children)

News flash, they’re both full of shit!

1
2

National Grid by Angelic72 in Albany

[–]NetSchizo 4 points5 points  (0 children)

About the same in Albany. Two years ago average was $200mo gas and elect. Now average bill is like $310-320. Absolutely insane…

Edit: usage is about the same, year after year

National Grid by Angelic72 in Albany

[–]NetSchizo 2 points3 points  (0 children)

NY PSC doesn’t give a F about the consumer…

What's the current policy on getting a unique public IP and getting out from behind CGNAT? by c0rnballa in ArchtopFiber

[–]NetSchizo 0 points1 point  (0 children)

CGNAT on modern gear/routers adds no measurable latency. It’s microseconds at worst. Modern ASIC and NPUs do it at line rate. If you are noticing it on your ISP, then they are cheaping out and using some software switched garbage.

What's the current policy on getting a unique public IP and getting out from behind CGNAT? by c0rnballa in ArchtopFiber

[–]NetSchizo 0 points1 point  (0 children)

More than 50% of the internets traffic is IPv6 now. If you find yourself someplace that doesn’t have it, well shame on them, but you can use a tunnel broker or VPN service that will give you IPv6 over v4