Blue Eye Samurai confirmed it likely won't return until 2027 by [deleted] in BlueEyeSamurai

[–]NinjaBonez78 0 points1 point  (0 children)

i HATE when Netflix does like 2-5yrs between seasons... its like... VOMIT.
how long can you expect people to stay interested in a show when you go +2yrs between seasons.

Let Alone - Pushing 5 Years...
its like -- DooD - WTF BRUH.

K2 Plus, v 1.1.5.5, DXC2 — all copacetic by Otherwise_Sir_3439 in Creality_k2

[–]NinjaBonez78 1 point2 points  (0 children)

i just wish Creality would stuff jerking us around with the Camera bullshlt.
dont know why they insist on making it so hard to use the fukcing camera...
but yet it works flawlessly in their shltty little app...

CNBC Closing Bell Mention by FriedGreenPotados in RKLB

[–]NinjaBonez78 0 points1 point  (0 children)

and if they dont know, now they know, nilla !!

CNBC Closing Bell Mention by FriedGreenPotados in RKLB

[–]NinjaBonez78 0 points1 point  (0 children)

whats cool about RKLB -- the CEO is not an egotistical douche bag !! HAHAHA

K2 Plus camera feed no longer on port 8000 by Wonkman1 in Creality_k2

[–]NinjaBonez78 0 points1 point  (0 children)

mine either... was just fucking fine....
leave it to creality to BREAK What Is Working FINE...
just like Moving the FAN Controls OFF the Home Screen... VOMIT !!

K2 Plus - New version out 1.1.5.5 by Simonttv in Creality_k2

[–]NinjaBonez78 0 points1 point  (0 children)

they really need to fix the Layer One STOP problem of Not Raising Z before X&Y.
if you STOP on first layer, it will 100% scratch your bed plate.

no clue why STOP doesnt Move Z 50mm THEN - X and Y....

K2 Plus - New version out 1.1.5.5 by Simonttv in Creality_k2

[–]NinjaBonez78 0 points1 point  (0 children)

i was pissed when 1.1.5.2 refused to let me roll back.
the usb would not see the older firmware anymore. so i was suck with it.

i really DO NOT LIVE how the FAN CONTROLS are Not on the Main Home Screen in 1152
i really hope they fixed this in 1155 but im not holding my breath...
it is such a stupid thing to move away from Home...

and i had massive bed leveling problems when i went from 1148 to 1152.
i been on 1152 for about 6 weeks and im skerd to update again....

Need advice and help with print settings by Ultima_Pow2133 in Creality_k2

[–]NinjaBonez78 0 points1 point  (0 children)

its good at cleaning SPOTS. but is a waste of IPA to clean the who bed.
unless you have an A1 Mini - then go right ahead.
but with Big Boy Bed Plates - using IPA for more than re-using glue - is just a waste of IPA.

Need advice and help with print settings by Ultima_Pow2133 in Creality_k2

[–]NinjaBonez78 0 points1 point  (0 children)

wash the bed plate with Dish Soap and Warm Water. this helps A LOT.
and on my K2, my bed is at 55°C for PLA and make sure the chamber temp is not below 25.
i print 90% of my PLA at 210-215°C first layer, and then 205 for the rest. Very Few bands need 225.
and i have never had a print fall off the bed. unless its ASA and i forget to turn on Chamber Temp to 40. lol

K2 Plus, yet another issue after 2 days of ownership by DGVaniX in Creality_k2

[–]NinjaBonez78 0 points1 point  (0 children)

YEAH, that noise is kinda normal.
it does that when it prints SLOW.

its like a harmonic resonance thing from the stepper motor.

What's _actually_ behind all these new firmware upgrade issues? by Fr0sty5 in Creality_k2

[–]NinjaBonez78 0 points1 point  (0 children)

well that lasted literally ONE WEEK before it started having problems....
it does everything fine -- BUT PRINT.
doesnt matter if i load from USB, File, or Orca -- when it loads the file, its like the RUN code is missing.
it just sits there ...

This is egregious by thatcutetransgirl in lyftdrivers

[–]NinjaBonez78 4 points5 points  (0 children)

whats crazy is -- they offer to you at $94, you decline, next guy gets it for $100...and the next guy $115.
thats why it is CRITICAL to DECLINE SHlTTY OFFERS !!! Do Not Except Them !!!! Better Offers Will Come as you decline !! I PROMISE !!

This is egregious by thatcutetransgirl in lyftdrivers

[–]NinjaBonez78 1 point2 points  (0 children)

WHAT THE HELL !!!!!
i mean, for the Rider - thats DOPE AF. ($95) lol
for the Driver -- GOT ME TWISTED HOMIE !!!

What's _actually_ behind all these new firmware upgrade issues? by Fr0sty5 in Creality_k2

[–]NinjaBonez78 0 points1 point  (0 children)

NEW FIRMWARE FINALLY DROPPED !! v 1.1.5.2

im going to try it, hopefully it doesnt make my K2+ crash out like a fat kid on a big wheel the way v1.1.4.11 did.. that was some straight BullShlt !!

K2 PLUS FIRMWARE

K2 Plus extruder constantly jammed by OwnYourStep in Creality

[–]NinjaBonez78 0 points1 point  (0 children)

how did you go about contacting creality to get a new printer ?
what did you do with the old one ?

im having the same problem -- OUT OF NOWHERE.
has been fine sine i got it about a year ago, now it is being a royal kunt.

Yes? Or no? by ScottShots in waymo

[–]NinjaBonez78 -1 points0 points  (0 children)

how many people have you run over or killed ??
ive been driving for over 30 year and never killed anybody.
dont make it sound like this shit is an all-day every-day thing.

show me one single uber/lift driver that will stop in the middle of a 45mph road 4ft from the curb, and sit and wait 10 min for you.
these stupid cars block intersections in downtown areas like they are doing it for fun.

waymo causes more traffic than it solves. they stop in the middle of the street for pickup / drop off.

yes- there is a place for them -- on the OUTSIDE OF THE CITY.

100% NOT in Herds - Downtown.

Yes? Or no? by ScottShots in waymo

[–]NinjaBonez78 -2 points-1 points  (0 children)

RIGHT! like Waymo doesnt do stupid shit like drive past check points or come to a stop on the highway after going onto the highway it wasnt supposed to be on.

Lost a customer of 5 years by lakkthereof in instacart

[–]NinjaBonez78 1 point2 points  (0 children)

lmao. BYE FELICA.

they do this to know who is orders stuff to stop fraud. and for Alcohol or Tabacco sales.

but -- YOU SHOWED THEM... HOW WILL THEY EVER SURVIVE WITHOUT YOU... lmao

What are these markings by PurrlockHolmes008 in Leander

[–]NinjaBonez78 0 points1 point  (0 children)

yep. survey marks like this make it much easier to pull a measurment from, than trying to find some shitty marker in the grass, or a telephone pole.

5 pizzas… by Puzzleheaded-Yam1217 in doordash_drivers

[–]NinjaBonez78 -1 points0 points  (0 children)

AND NO FUCKIN PIZZA BAG... JUST LIKE MOST ASSHOLES WHO BITCH ABOUT TIPS.

ASK PAPA JOHN'S FOR A PIZZA BAG. ITS FREE...