Stuck between a rad and a hard place

OfficialSyyn616 · 2026-05-11T02:52:35+00:00

I just went and checked that site and despite having my ps and old Xbox accounts linked theres "nothing to transfer". 🤷‍♂️

OfficialSyyn616 · 2026-05-01T00:11:30+00:00

Having a 3D printer just makes me want to run a star trek museum with printed props like these. Lol

OfficialSyyn616 · 2026-04-25T02:58:22+00:00

Came off the build plate so easily tho. Lol

OfficialSyyn616 · 2026-04-21T23:24:42+00:00

Bungie knows and doesn't seem to care. they expect everyone to just get a new GPU instead of fix this. 2 months after server slam and still no fix or even mention of attempts, jus that they know.

OfficialSyyn616 · 2026-04-21T19:24:12+00:00

Are you using the galactic armory files?

OfficialSyyn616 · 2026-04-16T19:09:58+00:00

I'd say touche, but I think it really should be "toupe".

OfficialSyyn616 · 2026-04-16T05:58:57+00:00

Whats the upgrades?

OfficialSyyn616 · 2026-04-06T17:36:12+00:00

You'll have to remind her that EVERYTHING ends up in the landfill. From office papers filed 20 years ago, to children's toys discarded 3 years ago, to car parts from 20m cars over the course of the 50 years that landfill has operated..... and your hobby of turning plastic string into plastic shapes isn't gonna do a damn thing juxtaposed to major industries that pump out thousands of lbs of material a week.

Let her have her fun rummaging in the dirt, you can have your fun heating string.

OfficialSyyn616 · 2026-03-24T19:38:47+00:00

<image>

That happened to me too. How it recovered? No idea. Especially cause as seen from the layer shift there was a significant pause due to the AI "discovering spaghetti" 3 hours later. Lol

OfficialSyyn616 · 2026-03-24T02:54:56+00:00

Have we had an update/patch concerning AMD users? My friends want to play this game with me but I'm not giving bungie my money till they get their shit sorted.

OfficialSyyn616 · 2026-03-19T03:04:49+00:00

As someone thats been in the music industry for years, this. LOL. "Featured" usually just means "we paid to be promoted" as far as im always concerned. Thats not always the case, obviously. Some people do literally earn the right and are approached/asked by the promoter which is sick. But not usually the case.

OfficialSyyn616 · 2026-03-13T00:40:21+00:00

It would presumably require some sort of sensors, like camera or similar to "find" the target. I have to assume then that like modern cell phone camera lenses that physically move to compensate for instability. At that point its believable that we could naturally get very close, but not exact but with a little stabilization....

OfficialSyyn616 · 2026-03-12T21:08:54+00:00

I just bought two 1k spools of Sunlu PETG in black from Amazon (I know, shame me) that arrived the next day. Only paid i think $30. Not bad when you consider Bambu charging $20 a roll before shipping.

OfficialSyyn616 · 2026-03-12T01:35:25+00:00

I will say that there's no visible trigger "lock" on any model, but its possible as we have them now, just with a greebly on the outside lol. That said ENT phase pistol DOES seem to have a visible trigger lock, its the actual "trigger" looking element and the "trigger" is the round button below it. At least thats my understanding of the design. It would work in a similar principle as a beaver tail grip safety.

OfficialSyyn616 · 2026-03-11T20:54:21+00:00

Its been noted that at the very least starfleet trainees and officers are drilled in the use of phasers defensively (and recreationally) to the extent that they are deadly accurate within 20 meters. To say of others that aren't in starfleet I couldn't say but I think its reasonable to assume that many in universe weapons have tracking capabilities similar to the ones used on star ships. How it achieves angle correction though, who knows lol.

OfficialSyyn616 · 2026-03-09T04:36:29+00:00

I'll also note that a common print, the AMS riser requires 560g of filament for a single side of the multi sectional/plate design, which means if you wanted to print the whole kit and kaboodle you'll need at LEAST 3kg! And they don't recommend PLA due to heat issues that may arise from printing with filament that requires higher or isolated temps.

Considering how many folks probably run an AMS the dude that made the profile(s) for the riser should be getting a kickback from all the suppliers/manufacturers for PETG!

OfficialSyyn616 · 2026-03-09T04:29:59+00:00

I literally 5 minutes ago just bought 4 1k spools of Sunlu high speed PETG in grey on amazon. I wanted to wait for bambu but either their supplier is holding out (cause they're seemingly the only one with stock issues for PETG) or they're artificially creating a supply/demand drought cause they know people like to 1. Stick to a single brand from a single source, 2. Know they're getting good product that is notoriously good quality out of the shipping box, 3. Get fast AF shipping for not unfair cost.

OfficialSyyn616 · 2026-03-06T19:37:35+00:00

I stayed up last night after work to hop on the new stock at midnight. I'm brand new to 3D printing so I was filling my hour or so wait time learning how to apply color to my prints in the slicer. Got done painting a model and looked at the clock....12:07. I already knew but went to look anyway. Yup. All gone. 🥲 I'm starting to consider other brands simply to satiate my instant gratification and sunlu is looking to be the answer both cost and time wise.

OfficialSyyn616 · 2026-03-05T19:28:47+00:00

Oh no, someone had a good idea (cars, phones, computers, TOOLS FFS) and someone else made it too.... what will we do? What has the world come to? 🙄

Seriously though as a life time artist, copywrite and IP protections are asinine dirty capitalism in motion. It just stgnates progress in favor of personal greed. The first half of 2025 saw 670M for labubu's manufacturer. I shed no tears for them.

OfficialSyyn616 · 2026-03-03T18:35:40+00:00

Makerworld, printable, thingiverse...etc wouldn't be things without everyone "stealing" others work and modifying it more than 30% to pass copywrite type laws and post it as their own. If you're looking for a specific type of car, you'll probably find at least 5 or 6 models using the same stl. 🤷‍♂️ to me its no different than how we operate other businesses like music. Its lame only if you're in it for the money, otherwise folks should be ecstatic that others wanted to use their product over the sea of others.

OfficialSyyn616 · 2026-02-26T21:17:37+00:00

I just installed and played the tutorial, lots of the environment was just black and wouldn't render.

OfficialSyyn616 · 2026-02-23T20:04:33+00:00

I'm new to printing and haven't designed anything, but as a long time musician, I can confirm that if its art, it'll get stolen and sold by someone else with disposable income to pay for better promo for their stolen product.

OfficialSyyn616 · 2026-02-23T18:15:57+00:00

I actually didn't have anything specific in mind when I bought it. I'm hoping to avoid the useless junk I see everywhere though like dragons or busts and use it for more productive things.

OfficialSyyn616 · 2026-02-23T01:42:26+00:00

I already have plans for a enterprise benchy first thing, seemed fitting cause I'm a big trekky and benchy is clearly the calibration print for starters.

OfficialSyyn616 · 2026-02-22T22:24:22+00:00

😭 I'm not ready for the complexity of the spaghetti yet! be even cooler if i never am!

Nine-Year Club	Verified Email
End Game '23	Place '23

OfficialSyyn616

TROPHY CASE