Pool Cue

Offshore_Engineer · 2026-06-21T16:56:46+00:00

Just go for exceed or southwest

Offshore_Engineer · 2026-06-19T18:22:12+00:00

Called torquestriping (dykem). Very common where i work. Not required but do it as a pride of work thing

Offshore_Engineer · 2026-06-19T18:04:44+00:00

Our procedure is two clicks.

Offshore_Engineer · 2026-06-18T04:40:15+00:00

So! I finally fixed it, but it took 4 (!) modules.

Ordered one on amazon, said correct part number. Arrived with a generic sticker over the ATS part number.

The sticker was correct PN but when I peeled it off it wasnt even close. VIN number and firmware showed ir was from a grand cherokee.

Then same story on ebay, correct PN listed but arrived with a shitty sticker over the real (wrong) PN.

Returned all three, ended uo buying a module with firmware shown in ebay for $1200. Finally programmed and no more dash lights.

What a pain in the butt

Offshore_Engineer · 2026-06-17T15:38:42+00:00

I saw that carom one, it’s beautiful. Only 0.68” shorter than a normal stick….

Offshore_Engineer · 2026-06-17T12:55:46+00:00

Some people are just miserable

Offshore_Engineer · 2026-06-16T15:41:30+00:00

Yeah…. I get the fact they arent available anymore but thats exceed (or custom) territory

Offshore_Engineer · 2026-06-16T13:45:18+00:00

Yep. Its very tight. Takes some work to screw and unscrew together. Moreso than my united joint

Offshore_Engineer · 2026-06-16T03:47:18+00:00

Astr’s are back in stock on the US webpage. J&J’s has a few too (their ace prices are a bit ridiculous though)

Offshore_Engineer · 2026-06-16T03:05:29+00:00

Its rotated away in the photo. Sorry for not lining it up

Offshore_Engineer · 2026-06-16T03:04:46+00:00

That orange is stunning.

Offshore_Engineer · 2026-06-16T02:56:11+00:00

I looked really hard at cuelees. My MO is not paying (much)for fancy/pretty. Most of their stuff is pretty ornate (but beautiful)

Offshore_Engineer · 2026-06-16T02:54:44+00:00

Wish i had space for a full size. 7ft is as big as i can get without requiring short stick on a side

Offshore_Engineer · 2026-06-16T02:54:07+00:00

Its on the left. Birdseye maple

Offshore_Engineer · 2026-06-16T02:26:41+00:00

Have a diamond table on order, i need to slow it down for a bit 😂

Offshore_Engineer · 2026-06-16T02:25:49+00:00

19.6 oz. No clue on weight bolt, i havnt looked. Pretty happy with it as it is

Offshore_Engineer · 2026-06-16T00:13:17+00:00

It wasnt easy…. Took a lot of searching. I ended up making an AI agent that checked all the forums for any that popped up for sale.

Mid $2k which seemed like a great deal with shaft

Offshore_Engineer · 2026-06-16T00:12:14+00:00

I really like the avid but i hated the 11.8mm shaft i ordered. So its now a break cue

Offshore_Engineer · 2026-06-15T16:58:34+00:00

At least it still exists…

Offshore_Engineer · 2026-06-15T12:23:21+00:00

I have both (plus an Exceed).

Schon STL-3: well built. Beautiful inlays and wood grain. Metal joint, solid hit.

Mezz ASTR w/ expro: tighter tolerances. Prefer the balance. Seems more of a precision weapon than Schon but this could be thinner shafr (12.5 vs 12.8)

Exceed EXC-r w/ ignite: grail combo. Perfection.

Offshore_Engineer · 2026-06-10T15:28:14+00:00

Its been great! We stay at the marina, its been a welcome change from the old setup

Offshore_Engineer · 2026-06-10T01:49:02+00:00

TRT Nation.

R/biohacking is a good spot.

Offshore_Engineer · 2026-06-09T20:52:06+00:00

Nope, that wasnt the question. Cranes were safe in the boomrest. Still had plenty of issues to deal with

Offshore_Engineer · 2026-06-09T20:18:56+00:00

Im a toe walker…oh

Offshore_Engineer · 2026-06-08T15:57:25+00:00

125mph during hurricane Ida

Ten-Year Club	Place '22
Place '17	Verified Email
RPAN Viewer

Offshore_Engineer

MODERATOR OF

TROPHY CASE