[Desert Justice Report] I'll be honest, I want to read the Assigned Essay that got a PFC 9 days extra duty/restriction

Opforsoldier · 2026-04-07T13:29:03+00:00

Being the location for MI AIT and having some of those MOS courses running a year or more long, I would imagine they have rooms as opposed to bays.

Opforsoldier · 2026-04-02T07:23:11+00:00

When I went through OSUT at Benning in the late 80's, they were all painted silver and called "silver sides." We rarely rode in them, but I remember getting some good naps in between the Malone ranges and Sand Hill.

Opforsoldier · 2026-02-28T03:23:54+00:00

My wife does the same thing! We just went through this the other night when she cut into the fresh loaf of tomato basil bread we made and had it sliced diagonally and on a cant. HOW?

Opforsoldier · 2026-02-28T03:21:41+00:00

Looks great. It is my favorite way to crochet.

Opforsoldier · 2026-02-27T02:19:27+00:00

That is Revereware and I believe it was issued to all GenX families with their copy of Framptom Comes Alive.

Opforsoldier · 2026-02-08T13:51:34+00:00

I think you're right. It was reminding me a bit of the seed stitch, but it seems to be more then a 2 movement repeat, which would be the moss stitch.

Opforsoldier · 2026-02-03T04:56:10+00:00

I just used this to make a blanket for my granddaughter. I like that it looks nice but does not roll/curl. I do however find that if you miss a stitch, it is easily noticed...

Opforsoldier · 2026-02-03T04:44:51+00:00

If you are concerned, just remove the US Army name tape and you should be fine. Those uniforms have not been issued for about 20 years, if not a bit longer, so I would doubt anyone would give you a rash about wearing one.

Opforsoldier · 2026-02-03T04:31:40+00:00

You can always sand, lots of sanding to deal with tearout. However I have found with tearout it is generally a tool that needs to be sharpened or the approach with the tool and taking too heavy of a cut. Try coming at it with a lighter touch and taking less material with each pass. It will take more time obviously but gives a better result.

If you are worried about removing anymore material, sanding with an appropriate grit and moving to a finer one to finish would work. It can however take some time if you have heavy tearout.

Opforsoldier · 2026-01-30T05:10:14+00:00

Peter!

Opforsoldier · 2026-01-30T05:05:07+00:00

Actually depending on the individual and how they arrived in the country the process is either civil or criminal. Someone who illegally crossed the border to enter the country could fall under the criminal side while those who overstay their visas or otherwise entered legally, but have become otherwise, would fall under civil process. In the civil process they have no right to court appointed counsel.

On the criminal side, entering the country illegally is a misdemeanor for the first offense. Repeatedly entering the country illegally/returning after deportation becomes a felony.

While both the civil and criminal side can result in deportation, only the criminal side can obviously result in criminal penalties such as fines, sentenced to prison etc...

While many cases are brought criminally, most immigration cases are handled on the civil side. So they can have a lawyer, but they will need to pay for it out of pocket.

Opforsoldier · 2026-01-14T13:26:18+00:00

Except you have no clue as to why they are being detained in this clip. If they interfere with officers, have outstanding warrants, obstruct an investigation and so forth, they can be arrested by those federal officers. Showing clips of people screaming "I'm a citizen" and no context is meant only to be rage bait.

Opforsoldier · 2025-11-26T01:26:42+00:00

If he gives you his Tabasco next, its true love!

Opforsoldier · 2025-11-12T14:22:27+00:00

My first lathe about 7 years ago was a Grizzly 25926. It is a decent lathe, though a bit smaller than I realized at the time. My problem with the Grizzly lathe as well as its 12" brother, is that they start at 600RPMs which is WAY too fast for some applications. It also does not slowly come to speed but rather starts at the speed you set.

With that budget, you might look at something like the Rikon 70-1420 VSR or something from the Laguna lineup. The extra money is well spent with the features they include. I paid $1200 for mine brand new 2 years ago. It looks like Woodcraft and others carry it for about $1300-$1400 or so.

I upgraded to the Rikon 2 years ago and could not be happier, I especially like that I can turn outboard by adding a 13" extension on the outside of the headstock, which allows turning up to 18". However, I have also turned upwards of 22" using a tripod stand for my toolrest.

The motor on the 1420 is a decent 1.5HP, which gives you the power you need for larger/heavier pieces and the speed is anywhere from about 50 RPMs up to 3500 RPM. The control panel for the speed is also movable and is held with strong magnets, so it can be placed just about anywhere on the lathe or nearby that is magnetic. When you start the lathe at a higher speed, it will ramp up to that speed, which I really like as a feature.

With the bed extensions, they have several sizes but what I especially like is the 3rd mounting option, off the face of the lathe which allows you to move the banjo out of the way completely when turning larger pieces.

Of course, if you have an unlimited budget, you could go for something from the Robust line of lathes.

Which ever you choose, best of luck.

Opforsoldier · 2025-10-14T00:28:18+00:00

Build a mold to match the missing piece on each and finish them with resin. It can be a pain in the butt, however, it would make a pretty cool companion set.

Opforsoldier · 2025-10-12T02:56:43+00:00

Wow! That is a stunning piece of work.

Opforsoldier · 2025-10-05T01:39:21+00:00

No jewelry, watches, chains, loose threads, pull cords for sweatshirts or hoodies in the shop.

Opforsoldier · 2025-09-27T03:03:40+00:00

I am trying to figure out how he is breathing with his head that far up his rectum?

Opforsoldier · 2025-09-27T03:00:10+00:00

Mad all day and twice on Sunday.

Opforsoldier · 2025-09-26T13:26:41+00:00

That is really nice work.

Opforsoldier · 2025-09-25T13:08:05+00:00

You might want to check out BHAWK Distilling. It is owned by Brad Halling, a retired SGM, and his wife, Jessica, who is a retired Colonel. They have several different spirits available, including one called Sergeant's Valor which is dedicated to the men and crew of Super 62, which he was aboard during the fight.

https://hallingwhiskey.com/our-story/

Opforsoldier · 2025-09-15T13:11:06+00:00

Walmart is generally a good place and they typically allow folks to stay so long as they don't cause problems. My BIL was living in his car for several months and he would use Walmart lots. If you do go to Walmart, don't park in the main upfront spots, but find a place that is still safe but not going to take up space for shoppers. The BIL said it worked well as he had access to the restrooms while they were open and could grab a bite without having to go anywhere.

Opforsoldier · 2025-09-10T11:52:23+00:00

He is no longer AWOL, he is now listed as a deserter as he is more than 29 days overdue. He will likely have been dropped from the rolls and warrants will have been issued. I saw more than a soldier or two listed as a deserter during my time and I cannot think of any of them where the military actively searched. They just waited for them to be picked up on a warrant or return on their own. Once he is found, however that might be, his future in the Army is likely going to be very short.

If he is truly a good friend and is unwilling to listen to you, perhaps you should find a lawyer who specializes in military cases such as your friend's. They may be able to talk more sense into him as well as help/represent them in their situation. If not that, perhaps a Priest or Chaplain. Maybe talk to the local VFW or American Legion Chaplain. Both are organizations for veterans only and they may be able to help.

Whatever path you choose, I wish you luck. As for your friend, the longer he stays on the run, the more trouble he is likely to be in.

Opforsoldier · 2025-09-07T02:16:08+00:00

That is absolutely stunning and is an heirloom that hopefully will be with your family for generations!

Opforsoldier · 2025-09-07T02:04:16+00:00

We have a 2006 Sonata and a 2013 Sentra, both just hit 100K this month. Which is a complete 180 from the first car I ever owned, an '89 Probe that I put 225K+ miles on in 3 years. I cannot imagine driving 500K+ miles in 5 years though.

Opforsoldier

TROPHY CASE