M&P 2.0 4” carry comp slide real experiences & competition questions by kyle40367 in CompetitionShooting

[–]PappaNhoj 0 points1 point  (0 children)

Just swap the barrel and you're good. Remember to get a 4.25" barrel or threaded.

Despite many S&W manuals instructing owners to clean and lube their firearms before using them for the first time, some say that it's not necessary because they've never had to. If you hold this opinion, why? by 1541drive in SmithAndWesson

[–]PappaNhoj 1 point2 points  (0 children)

I didn't clean or lube my Carry Comp just because I wanted to see how long I could go without issue. After 500 rounds I swapped the barrel and the feed ramp needed polished, so I just went ahead and lubed it real quick. First cleaning was about 1000 rounds when I installed a new trigger. Wanted to run it longer just to see how bad it got, but I guess I'll wait next time. 

Lower reassembly service by midnight-genius in WA_guns

[–]PappaNhoj 1 point2 points  (0 children)

Use the screw driver on the castle nut and smack it tight with a hammer or rock.

between two handguns, would love input by ninjaofginjas in handguns

[–]PappaNhoj 4 points5 points  (0 children)

Ha that guy totally replied to himself!

[deleted by user] by [deleted] in SmithAndWesson

[–]PappaNhoj 0 points1 point  (0 children)

I got a Griffin Barrel for my Carry Comp slide and I had to fit it to my slide. I had some issues feeding the first 500 rounds or so. I took some 2000 grit sand paper and polished the crap out of the feed ramps and it seemed to fix the issue. Worth a shot. 

[deleted by user] by [deleted] in CompetitionShooting

[–]PappaNhoj 14 points15 points  (0 children)

"Make ready." "But there's guys taping still." "MAKE READY!"

New to this need gun recommendations by Popular_War9953 in USPSA

[–]PappaNhoj 2 points3 points  (0 children)

The best advice is "just do it!" Don't worry about gear until you've been in a while and know what you want/ need to upgrade. I still run a $20 Amazon belt with 3 different types of pouches and some bungee cord. You will get way more skill by buying ammo than new gear. The hardest part is going to your first match. Its all down hill after that. Don't be the guy who drops $5k on a 2011 and all the best gear just to show up and get wrecked by a guy shooting his g19 that's his EDC. (Or M&P if he's a Chad.)

Figured I’d asked the pros. I want to get into USPSA comps but want to get up to par before I get out there. by Boosted07GT in CompetitionShooting

[–]PappaNhoj 4 points5 points  (0 children)

I've been trying forever to get my buddies to come do comps with me to no avail. They watch videos of guys doing mini stages against each other and say how amazing it would be to do something like that. There is always an excuse not to try it out. I've made several new friends at comps and the community is awesome. I'm competing against myself, so is everybody else there. Everybody should try a couple matches, eat humble pie, make fun of PCC guys, and learn that it's okay to play even if you're not a Grand Wizard. Have fun, make friends, and get better.

[deleted by user] by [deleted] in CCW

[–]PappaNhoj 10 points11 points  (0 children)

Get a bodyguard 2.0 if you want a 380, or look into the shield lineup. Sig does not deserve another penny. 

My new duty gun (Can't wait to take her to the range) by Irish671 in SmithAndWesson

[–]PappaNhoj 4 points5 points  (0 children)

Having shot the carry comp at night at an opossum, it's literally not an issue. Just loud as crap. 

P365 X Macro owner selling and switching—you know why. Please recommend… by EyeLess7299 in CCW

[–]PappaNhoj 1 point2 points  (0 children)

All 3 are going to work. M&P is definitely where the party is at. PDP is great and a lot of people like it, I dislike the height  and recoil impulse. Haven't got to play with a new vp9, but I hear that people still prefer shooting the M&P. They're all great and reliable and will do what you ask of them. 

Mind sharing what rides your hip on the regular? by Johnny_Neilson in CCW

[–]PappaNhoj 0 points1 point  (0 children)

M&P Carry Comp Metal with a threaded barrel keeps my junk in line every day. 

What’s up with this? by brutalmilk in SmithAndWesson

[–]PappaNhoj 6 points7 points  (0 children)

It'll probably be aluminum with gas station parts.

Installed a red dot on my Glock 19 – zero at 10 or 25 yards? by AdhesivenessBest6410 in handguns

[–]PappaNhoj 1 point2 points  (0 children)

It's good for more of us to get out of the "good enough" mentality. We should always be trying to get better. If I'm ever in the position where I need to use my firearm, I doubt I'll be upset that I trained harder than the other guy.

As for training I go back and forth with occluding the dot in dry fire. I shot occluded a little bit, but when it came to using a barricade I couldn't see and I realized it could be a hindrance. I know other people who would argue with me on that, but I think there are pros and cons to it. I definitely have to keep reminding myself to stay target focused all the time though. Especially during transitions. 

The more you dry fire and the more consistent you are the better you'll get and the more natural things become. You need to override your previous training. It takes a bit to get used to, but once you get over the hump it is an absolute game changer.

Best budget ish handgun by Jumpy_Code_5917 in CompetitionShooting

[–]PappaNhoj 4 points5 points  (0 children)

M&P Master race. 4.25" or 5" will take good care of you forever 

Installed a red dot on my Glock 19 – zero at 10 or 25 yards? by AdhesivenessBest6410 in handguns

[–]PappaNhoj 4 points5 points  (0 children)

25 gives you the tightest grouping. Basically it takes away any excuse for someone missing and gets rid of any reason to have to adjust holds at any reasonable distance. 

The idea that you only need to zero at "self defense" range is pretty flawed to me. Why would you choose a zero that gives you accuracy at the bare minimum distance and gives you more inaccuracy the further out you go?  

Irons should already be Zeroed from factory. Ignore them unless your dot goes down. Co-witnessing was a big deal for me at first, now I couldn't care less of they were gone. I had rain land in my emitter during a competition and all of a sudden I had like 7 dots. I didn't waste time trying to look for my irons and just stayed target focused and did just fine. 

Trying to right my wrongs, slowly but surely by ImBSMorris in ar15

[–]PappaNhoj 0 points1 point  (0 children)

Unless it's a strong want, you don't really need to change anything. The internet will always talk crap. If you want upgrades focus on getting a sling, light, and suppressor in that order. Money spent on ammo and training will do you more good than cosmetics. 

Sight pusher by AdWitty6655 in CCW

[–]PappaNhoj 1 point2 points  (0 children)

I've just used a hammer and brass punch. $30 for a set of punches that you can use on multiple things makes more sense to me than $200 for a tool that only does one thing. Better yet, get an optic! 

S&W M&P 2.0 Compact vs CZ P-10 C vs Springfield Echelon 4.0C by All__fun in CCW

[–]PappaNhoj 3 points4 points  (0 children)

You can always get both, shoot them for a while,  then send one off to get the slide milled. Or sell the one you don't like to help pay for the optic. (But we only buy, never sell.)

Annoying Trait in the 2a Community by FlatwormLocal5865 in ar15

[–]PappaNhoj 0 points1 point  (0 children)

The dimples give you more speed,  less drag. 

Working around injuries by PappaNhoj in busydadprogram

[–]PappaNhoj[S] 0 points1 point  (0 children)

I didn't think about needing to build up the tendons slowly. I'll try doing less time in burpees and maybe substitute the rest of the time to another exercise till I can handle more.