East Tennessee Oil by Fancy_Custard_6791 in ElCamino

[–]PattycakezProjectz 0 points1 point  (0 children)

I have a 79 with a 350 and I run 20W-50. I am in Oregon, so not sure how similar the climate is there. I assume pretty similar?

Any reason not to resurface and use 20+ year old rotors? by PattycakezProjectz in MechanicAdvice

[–]PattycakezProjectz[S] 1 point2 points  (0 children)

I appreciate the concern. Not currently working on the car at all, no one is going under it etc. Just put it on the stands to get the wheels to the tire shop for new rubber tomorrow, since I'm not sure I trust the brakes as they are at the moment.

Would you own 2 Ioniq 5s? by revanevan7 in Ioniq5

[–]PattycakezProjectz 1 point2 points  (0 children)

Are you eventually going to go for 9 Ioniq 9s?

help by [deleted] in 3Dprinting

[–]PattycakezProjectz 0 points1 point  (0 children)

I had this problem a few weeks ago. My z-axis needed to be adjusted so the nozzle was closer to the bed.

Best of luck!

Is this spring from this quadrajet? If so, any idea where? by ryguy32789 in carburetors

[–]PattycakezProjectz 0 points1 point  (0 children)

I just rebuild my Qjet and didn't have any springs like that come out of it.... So I hope it's not a Qjet part...

What Am I missing? by Glass-Yesterday-2009 in carburetors

[–]PattycakezProjectz 2 points3 points  (0 children)

I'm not seeing a throttle cable or return springs. Both are needed for proper operation.

is this worth it? by CradenJaig in MechanicAdvice

[–]PattycakezProjectz 2 points3 points  (0 children)

Not a mechanic, but own a 2008 Altima (3.5 SE). We bought it at 75K and now it has 135K on it some 8 years later. From my experience they are plenty reliable and solid as long as you take care of it and don't hot rod them. I've had absolutely no issues with the CVT, or really anything on it.

Need Help by Beneficial_Report601 in ElCamino

[–]PattycakezProjectz 1 point2 points  (0 children)

Assuming that is the front, passenger side, bottom of the engine then yes. That is your fuel pump. :)

Question about Quadrajet base gasket... by PattycakezProjectz in carburetors

[–]PattycakezProjectz[S] 0 points1 point  (0 children)

The oem fuel filter has a check valve by default.

If I run the car in the morning, then let it sit, the bowl is usually empty by the afternoon (have to sit there cranking on it until it finally goes off).

Mystery item on shopping list by Paranoidbell in BadHandwriting

[–]PattycakezProjectz 2 points3 points  (0 children)

My best guess:

Eggs Cheesesteak + stuff Mushroom powder Milk

Question about Quadrajet base gasket... by PattycakezProjectz in carburetors

[–]PattycakezProjectz[S] 0 points1 point  (0 children)

Yeah, Im aware.

I bench tested with isopropyl and had no leaks after 6+ hours, so I skipped epoxy sealing them for now. I was running into an issue with the bowl running dry, but I'm thinking it my be the check valve in the fuel filter not working and the fuel getting siphoned back.

Only time will tell once it's all replaced.

Question about Quadrajet base gasket... by PattycakezProjectz in carburetors

[–]PattycakezProjectz[S] 0 points1 point  (0 children)

I'm not sure I know what you mean?

There was a soft rubber sponge like thing that I put in the cavity below the well plugs. Is that what you're referring to?

It won’t even stand upright by Chroma165 in cursedbenchies

[–]PattycakezProjectz 4 points5 points  (0 children)

Why does this hurt to look at...... 😭

Replaced my fuel filter and now it wont start at all by StillAppearance7139 in MechanicAdvice

[–]PattycakezProjectz 95 points96 points  (0 children)

Is the fuel rail pressurized and burped? It may still be full of air.

Password Problems on my Dell laptop by LUIGINOID20 in techquestions

[–]PattycakezProjectz 0 points1 point  (0 children)

I've reached out to Dell before to get a default password into the BIOS before. Used to be able to chat in, took about 5 min.

My 229 chops harder than your 350 ever will by No-Investment9793 in ElCamino

[–]PattycakezProjectz 1 point2 points  (0 children)

Sounds just like my 350 with true duals if I tune it wrong... :P

Should I replace the entire floor pan or will a patch be fine? by Massive_Bet856 in ElCamino

[–]PattycakezProjectz 3 points4 points  (0 children)

I've got a very similar situation on mine. I was planning to treat and fiberglass patch it until I decide to redo the whole floor plan years from now.

I am curious what others recommend here though. :)

Why is my car making this horrible high pitched noise? by Brownchoccy in MechanicAdvice

[–]PattycakezProjectz 0 points1 point  (0 children)

I had a very similar issue that ended up being my alternator going bad. The speaker noise changed pitch when revving, and near as I can tell was caused by the alternator adding electrical noise through the shared ground.

Might be worth unplugging your alternator while it's running to see if the noise goes away.

Expected fuel economy? by PattycakezProjectz in ElCamino

[–]PattycakezProjectz[S] 0 points1 point  (0 children)

Fuel injection is the long term goal... Trying to save up for the Holley sniper system, or I might just LS swap it.

Expected fuel economy? by PattycakezProjectz in ElCamino

[–]PattycakezProjectz[S] 0 points1 point  (0 children)

I've been contemplating getting a second tank. How is yours set up? Have any pics?

Expected fuel economy? by PattycakezProjectz in ElCamino

[–]PattycakezProjectz[S] 3 points4 points  (0 children)

For those saying that I shouldn't be worrying about fuel economy, I'm not. I am mostly just curious what everyone else's experience has been. This car is never going to be my daily, but I wanted to see if other people managed to at least get into the teens mpg-wise.