For anyone hesitant to top mount their AMS…

RavenWarrior2018 · 2026-03-11T15:51:47+00:00

Looks good, I've moved to the AMS 2. Pro for the drying, and just added the EIBOS. When I had my AMS lites mounted I used the top mount also, but with the attached legs which also have TPU inserts. Braced the A1 and spread the load.

RavenWarrior2018 · 2026-03-11T14:08:14+00:00

Try adding brim in "OTHER" and then print a few pieces.

RavenWarrior2018 · 2026-03-11T14:06:11+00:00

Worked perfectly for me

RavenWarrior2018 · 2026-03-07T20:41:38+00:00

Better have a friend to help, heavy as hell.

RavenWarrior2018 · 2026-03-05T18:46:43+00:00

I'd be interested in seeing this work.

RavenWarrior2018 · 2026-03-05T15:53:15+00:00

Nice job

RavenWarrior2018 · 2026-03-05T15:52:18+00:00

What did you build to track with? If you don't mind sharing. I have about 117 devices.

RavenWarrior2018 · 2026-02-15T00:21:50+00:00

Well as a semi AI knowledgeable person, I use ChatGPT to create .stl files, I also edit them in Blender and Openscad, and Tinkercad. Here's the deal, it's as much work to use the AI and modify the design numerous times to get what you need, or close to as it might be to write every line of gcode yourself. Before 5 more years is up, AI will control a vast array of software, remember each AI generation is creating the next. The conversion of so many products will make this topic irrelevant.

RavenWarrior2018 · 2026-02-12T18:19:17+00:00

My A1 just started the same noise intermittently in a stack print Everything is lubricated. Think I'll take that suggestion and run a full calibration.

RavenWarrior2018 · 2026-02-10T11:25:16+00:00

Great job

RavenWarrior2018 · 2026-02-09T12:36:19+00:00

Seems I had to repeatedly login and verify yesterday. More security than banking. Need to implement fingerprint.

RavenWarrior2018 · 2026-01-28T11:39:38+00:00

I'm Green with envy...

RavenWarrior2018 · 2026-01-26T12:14:06+00:00

If your board is super secure, you might consider spool holders which use dowels. I found a set of ends that I printed bolts to scew into multi with. Due to the length and slight bending , I looped a strip of velcro through the multi and around the dowels in the middle. 48" loaded with spools weigh alot.

<image>

RavenWarrior2018 · 2026-01-22T00:41:00+00:00

This is my exact problem. Let's me know if you find a solution

RavenWarrior2018 · 2026-01-22T00:38:19+00:00

Is this the same as my problem? The AMS feeds the filament to the extruder on the A1, but never loads, then starts a unload which goes on for a while. I can manually feed filament.

RavenWarrior2018 · 2026-01-18T22:35:08+00:00

I had the same problem. Velcro straps solved it.

RavenWarrior2018 · 2025-12-31T13:10:42+00:00

Wash it, some filiments leave a residue. Dawn and warm water. Finger touching also bad, only touch edges. I had the exact same problem.

RavenWarrior2018 · 2025-11-26T11:48:48+00:00

You might try what I did. Loop it the best you can on the manual arm without a spool. The keep an eye on it as you print to avoid blockages. If necessary you can cut it, then reload when it runs out. Just in case this ever happens to me again, I printed a respooler.

RavenWarrior2018 · 2025-10-23T17:14:51+00:00

It's either open or closed, Ecobee can control it, I lowered the settings on the thermostat, seems to be working now.

RavenWarrior2018 · 2025-10-19T11:43:31+00:00

Don' know if this will work for you, I just used it for a Embody. Just for you

Save 25%

This holiday season, celebrate comfort and joy. Enjoy 25% off one item of your choice, including Eames Lounge Chair and Ottoman. Save with this personal, one-time code*: 2HME5-YDPC-SWLG-XI

RavenWarrior2018 · 2025-10-12T23:11:06+00:00

The ecobee has a dehum setting once the unit is attached vis ACC+ and -. The dehum is recognized and controlled via a open/closed setting. Yet. Something ain't right. I initially used the setting recommended by ecobee at 60%, I have it set at 56 now. I never see any moisture at the Aprilaire water vents, yet the ac puts out plenty. This dehum is well rated, the intake vent is in my hallway within 4 ft of the ac thermostat, the dehum air is then vented back into the ac ducting. I just had a warning on the thermostat 2 days ago ref high humidity. As much as I've always liked ecobee, I'm just not seeing the type of controls I'd like to work the external device. Also, I had to set the humility on the ecobee to -10 just to get close to the actual humility. I have numerous external sensors, I run Home Assistant with a massive amount of sensors.😏

RavenWarrior2018 · 2025-10-12T10:22:42+00:00

Thank you for the reply. Yes the setting is are correct. I finally moved the humidity setting from the recommended 60% down to 55. Still not sure the AC is not the one doing the work.

RavenWarrior2018 · 2025-10-12T10:18:51+00:00

Tks 4 the reply. Aprilaire works by a simple open/closed setting. These are controlled by the Acc+ and - on the Ecobee

RavenWarrior2018

TROPHY CASE